REPAIR/REPLACEMENT OF JOINERY AND OTHER ALLIED WORKS IN OFFRS MD ACCN IN SHANKAR VIHAR UNDER AGE B/R-II (S) OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down chowkats or frame with shutters (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete.

Taking down of shutter of any description exc 1 Sqm and n.exc. 2 Sqm each complete

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm 2 or more rabates comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).

Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fittings shall be measured & paid under relevant item

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges shall be paid separately under relevant item).

M & L for Cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in back filling, holdfasts etc, complete all as specified and as directed.

S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated as specified.

S&F 35 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (any panels) open rebated and prepared to receive wiremesh/glass/gauge etc with all accessory as required and divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc Size of members of shutters complete all as specified

S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing .

Taking down & refixing in same opening of shutter of door , windows etc n exc 1.0 Sqm including easing and also refixing builder hardware as required including renewal of unserviceble screws , welding as required etc. complete all as specified and as directed

Taking down of steel windows shutter etc n exc 1.0 Sqm complete all as specified and directed by Eng-in-Charge.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

Taking down aluminium windows shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings, rollers and panels, if any required complete all as specified and as directed.

S&F powder coated anodised aluminium frame as in door , window, ventilator and shutter etc. with one or more rebates including joining cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snapbeading, screw etc complete all as specified and directed by Eng-in-charge. Note: (a) Glazing shall be measured seperatly ; (b) Items shall be paid as per weight of of aluminium sections . (c) The rates quoted shall be inclusive of neoprene beading glazing clips , screws , etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including complete .

S&F in repair 4.8 mm thick sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square not exc 0.5 sqm in each pane

S&F in repair stainless steel telescope channel of size 300MM to 500mm complete all as specified and as directed.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified.

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m all as specified.

S&F in repair Steel rolling shutters, 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated , push pull or manual type complete all as specified.

S&F in repair 32 mm dia good quality MS Drappery Rod (rubber coated), with fixing brackets, side knobs etc (any colour/ any pattern) complete all as directed.

S&F in repair SS curtain rod of 25 mm dia , with fixing brackets, side knobs etc (S S / any pattern) complete all as directed.

Dismantling boarding, any description, fixed in any position with nail or otherwise complete all as specified.

S&F 6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails complete all as specified and as directed.

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required , complete all as specified and as directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size , WPC foam sheet Single Extruded ( Inner ) having good screw holding capacity , resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and as directed.

S&F CP clip on hinges (Inset) for baninate boxes/board and other places as required including in repair complete all as specified and as directed.

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw.complete all as specified and as directed.

S&F in Repair U shaped double stainless steel channel of size 10 mmx 20mmx 1.50 mm fixed to wooden frame including suitable rail / rollers etc complete all as specified and as directed .

M & L for preparation of new wooden surfaces / previously unpainted of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified.

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of perature 1.40mm and fixed with SS wire staples in door/windows and similar work all as specified and as directed.

S&F stainless steel butt hinges, ISI marked of size 100 mm complete.

S&F stainless steel AISI 304 grade barrel tower bolt 150 mm long, extruded section,etc. complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel tower bolts, ISI marked 100 mm long , of extruded section and fixed complete as specified and as directed .

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts, ISI marked 200 mm long , of extruded section and fixed in new or in repair complete as specified and directed.

S&F in repair for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size new complete all as specified and as directed.

S&F in Repair for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F Stainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair aluminium alloy anodised sliding door bolts of 300 mm long with hasp,staple (bolt type) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section and fixed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised , width of flap (when open) is 30mm, complete all as specified .

S & F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete.

M&L for running welding in repairs including cleaning and preparing surfaces for welding any thickness of metal to be welded such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work , finshinh to match with original surface, length to be measured from any one direction complete all as specified and as directed.

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified.

M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified.

M&L for preparing of old painted surface pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and apply one coats of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken glass n.exc 1.50 Sq.m(any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, all as specified.

S&F, Sheet glass 4 mm thick , ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pan complete all as specified and as directed .

S&F 4 mm thick Figured glass , pin headed type in squares not exceedig 0.50 sqm each pane complete all as specified and as directed..

Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified

S&F for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified.

S&F plate girder or single stanchions,built up of one beam or tubular section with flange plates, caps,bases. splices, angle brackets,cleats and other connections confirming to Fe-410-W(Gde E-250 ) quality A , all as specified and as directed.

Dismantling of asbestos cement sheet in roof covering( any shape and size) , complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified

S&F in repair CP Brass health faucet with hand shower and 1.5 mtr flexible stainless steel pipe of good quality suitable for fixing to 15 mm dia pipe complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S& F roller blind curtain/ Canvas including all aceesories required to make it functional complete all as specified.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling complete all as specified

S&F acoustic gypsum perforated board 12 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid complete all as specified and as directed .

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

Chaudhary Constructions (BID ID -3073891)

M/S Parmod Johar (BID ID -3071926)

P R Constructions (BID ID -3072678)