PAINTING TO RUNWAY, DISPERSAL AREA, SHOULDER DRESSING, ORA PAINTING AND CERTAIN MISC WORK UNDER GE AF UTARLAI

Amount

M&L for preparation of old painted lines,dashes,arrows, letters etc on concrete roads, pavements and the like, over 10cm in width and applying one coat of acrylic water based road marking paint, any tint all as specified and directed by Engr-in- Charge

M&L for complete removal of existing painted lines, dashes,arrows, letters, etc on concrete roads, pavements and the like over 10cm in width and applying two coats of acrylic water based road marking paint, any tint all as specified and directed by Engr-in- Charge

M&L for preparation of old painted lines, dashes,arrows, letters, etc on concrete roads, pavements and the like n. exc 10cm in width or girth not otherwise described and applying one coat of acrylic water based road marking paint any tint all as specified and directed by Engr-in-Charge

M&L for preparation of old painted lines, arrows, letters etc on concrete roads, pavements and the like n. exc 10cm in width and applying two coats of acrylic water based road marking paint any tint all as specified and directed by Engr-in-Charge

Labour only for cutting of grass, scrubs, herbs etc on shoulder of runway / PTT links by surface dressing n. exc 15cm deep in soft/ loose soil by using fawda incl stacking the grass at a distance n.exc 50Mtr etc complete all as directed as site requirement by Engr-in-Charge. Note :- (i) Grass cutting work shall be done by manual labours with the help of fawda and purpose made tarwars. The contractor shall employ daily labours who will report to ATC every morning to ensure grass cutting work as per requirement of AF authority. (ii) The grass cutting work shall be carried out on runway, PTT, links and other aircraft manoeuvring areas used for flying. In case of an emergency the contractor and his labour shall be required to vacate the air field on very short notice. The tender shall allow for these contingencies in the quoted rates and no claim for any loss of men hours for any cause what so ever shall be entertained. (iii) The stacked grass shall be removed outside the MOD land on daily basis and quoted rates deemed to be including of removal.

Labour only for cutting of grass, scrubs, herbs etc on shoulder of runway / PTT links using covered jungle gim to prevent spreading of grass in such a way that height of grass is maintained at a level n.exc 7.5cm from GL incl stacking the grass at a distance n.exc 50Mtr complete all as directed by Engr-in-Charge. Note : (i) Grass cutting work shall be done by mechanical means using jungle gim with cover to prevent spreading of grass on aircraft manoeuvring areas. The employed labour with machine/ equipment will report to ATC every morning to ensure grass cutting work as per requirement of AF authority. (ii) Grass cutting work shall be carried out in areas used for flying. In case of an emergency the contractor and his labour shall be required to vacate the air field on very short notice. The tender shall allow for these contingencies in the quoted rates and no claim for any loss of men hours for any cause what so ever shall be entertained. (iii) The stacked grass shall be removed outside the MOD land on daily basis and quoted rates deemed to be including of removal.

Ditto as per item No 6 above but using bush cutters complete all as specified and directed

M&L for preparation of old concrete surfaces of roads and pavements and applying one coat of cement base paint of any tint complete all specified and directed

Demolition of cement concrete of any description exceeding 15cm thick as in floor/paving and removing the same upto 5.00Km or out side MD land complete all as specified and directed

M&L for coarse sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for 400 micron polythene film transparent (Non recycled laid over a sand layer with side and other lap shall not be less than 300mm etc complete all specified and directed

Use waste of form work to side of concrete fair finished flat surface of concrete complete all as specified and directed

M&L for cement concrete work in pavement/hard standing of flexural strength 40kg per sq cm in field using 400 kg of cement per cubic metre thickness of concrete 25cm or less complete all as specified and directed

Supply only polyester triangular fibre 6x12 mm long with semicircle dia 30-35 micron designed for melting point 240 to 260 degree Celsius and having specific gravity of 1.34-1.40, 'Recron3S' manufactured by M/S Reliance industries Ltd or equivalent make and mixing @ 0.25% by weight of cement complete all as specified and directed

Labour for finishing surface of concrete floors / hard standing by brooming complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as sub base and foundation of concrete complete all as specified and directed

M&L for forming construction joint 10mm wide and 30mm deep and filled with sealing compound Grade 'B' complete all as specified and directed.

M&L for forming contraction (dummy) joint 65mm deep and 10mm wide filled with sealing compound Grade 'B' complete all as specified and directed.

M/S TANUSHREE CONSTRUCTION COMPANY

National Rewinding Works

M/s Malinath Electricals

m/s sai construction company,bijarar

Devi Engineeing