Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹85.3 LAccepted-AOC VPO BAILLY TEH DALHOUSIE DISTT CHAMBA HP 176303 | DALHOUSIE | CHAMBA | HIMACHAL PRADESH | 176303 | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹91.7 L+₹3.6 L (4.09%)Rejected-Finance H NO 400 STREET NO 1 SAIN GHAR PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹99.9 L+₹11.8 L (13.4%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | l4₹1.0 Cr+₹12.3 L (13.9%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | l4 | Rejected-Finance Other than Lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical EPF not uploaded |
Tender Value
₹94 L
EMD Value
₹1.7 L
Closing Date
7 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE (AF) Jammu
Headquarters, CWE (AF) Jammu, Near Gurdwara Sahib and Mandir, Airforce Station Satwari, Jammu. Pin - 180 003
WORK SERVICES FOR IMPROVEMENT TO SNCOs AND AIRMEN MESSES AT MOTITIBBA AT AF STATION DALHOUSIE UNDER GE (AF) PATHANKOT
2023_MES_626887_1
CWEAFJ-23/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Pathankot
All as per Tender Documents
8 documents required · 8 mandatory
₹1,000
GE (AF) Pathankot
₹1.7 L
Yes
14 Feb 2024
4 Nov 2023
9 Dec 2023
4 Nov 2023
7 Dec 2023
30 Nov 2023
Amount
Dismantling Plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings etc, complete all as specified and directed.
S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of colour as approved having strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc, complete all as specified and directed.
S&F Pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.5 mm thick of colour as approved having strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc, complete all as specified and directed.
S & F Fe 410-w(Gde E-250) quality B rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc, complete all as specified and directed.
S&F MS plates Fe 410-W(Gde E 250) quality A plain or chequered square cut or notched forming holes drilled or welded any thickness etc, complete all as specified and directed.
M&L for Painting to steel surfaces with synthetic enamel paint over one coat of red oxide primer etc, complete all as specified and directed.
Removal of existing roof treatment and steel wire brushing and cleaning top surfaces of cement concrete and removing demolished material not exc. 50m, etc, complete all as specified and directed.
Material and labour for rendering 10 mm thick plaster in cement mortar 1:3 on concrete surface on roof or terrace , finished even & smooth without using extra cement,with water proofing liquid, etc, complete all as specified and directed. (Note :- Water Proofing liquid shall be measured and paid separately under respective item)
Applying a coat of cement slurry @ 3 Kg per Sqm including preparation of surfaces etc, complete all as specified and directed.
APP (atactic Poly-propylene polymer) modified membranes, five layered, 3mm thick weighing not less than 3 kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator only after applying evenly a coat of industrial bitumen 85/25 at the rate of 1.2Kg/Sqm on the bottom of APP and on top of joints of APP etc, complete all as specified and directed.
Supply only liquid water proofing compound, etc, complete all as specified and directed.
Dismantling water tanks of capacity exc 500 ltrs but n.exc 1000 ltrs and removing from the site etc, complete all as specified and directed.
Dismantling old Wall and ceiling boards (fiber, pulp insulation/slabs/blanket), any thickness, including cover fillets etc, complete all as specified and directed.
Providing & fixing false ceiling at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less than 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Non-combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm, cross T of size 15X32 mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing etc, complete all as specified and directed.
S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified.
S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium snap beading screws etc, complete all as specified.
S&F 5.5mm thick tinted/plain glass for aluminium windows/doors having each pane exc 0.5 sqm incl complete fittings complete all as specified and directed.
S&F 5mm thick plain colour pvc backelight sheet in strips channel feathered at for fixing on aluminium frame partition , complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples as in repairsetc, complete all as specified and directed.
Taking down chowkats or frames including shutter exc 1.50Sqm but nexc 4.00Sqm , etc, complete all as specified and directed.
Taking down chowkats or frames including shutter n.exc 1.5 Sqm, etc, complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & Fixing in opening as per specification & drawing etc, complete all as specified and directed.
S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing, etc, complete all as specified and directed.
S&F 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed etc, complete all as specified and directed..
S&F 150 mm size aluminium handles, cast type, anodised etc, complete all as specified and directed.
S&F 150 mm aluminium anodised barrel tower bolts extruded section fixed etc, complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvant cement and fixing at site on PVC frame etc, complete all as specified and directed.
Demolition of brickwork/Stone boulder masonary built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles etc, complete all as specified and directed.
Brickwork with sub class `B` old size brick straight or curved on plan exc 6 mtr mean radius built in cement Mortar 1:4 etc, complete all as specified and directed.
Taking down cement plaster of any thickness racking out joints, hacking for key scrubbing down with water including removal of rubbish of the premises etc, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement etc, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement etc, complete all as specified and directed.
M&L for rendering 5 mm thick on ceiling, fair faces of concrete surfaces in CM 1:3 finished even and smooth without using extra cement etc, complete all as specified and directed.
M&L for applying two coats of oil bound distemper on newly plastered surfaces of walls and including 3mm thick wall care putty etc, complete all as specified and directed.
M&L for applying two coats of white wash on newly plastered surfaces of ceiling etc, complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of Oil bound distemper on walls over 3mm thick wall care putty , etc, complete all as specified and directed.
M&L for preparation of old surfaces and applying two coats of white wash on walls etc, complete all as specified and directed.
M&L for preparation of old surfaces and applying two coats of white wash on ceilings etc, complete all as specified and directed.
M&L for demolition cement concrete in ground floor and paving not exc 15 cm (above or below ground level) etc, complete all as specified and directed.
Providing, 50 mm thick cement concrete 1:3:6 in plinth protection type C-1 with 20 mm graded crushed stone aggregate finised even and smooth without using extra cement laid in alternate bays (not exceeding 2 Sqm each) and the joint shall be filled with mastic filling comprising one part of heated bitumen 85/25 or 90/100 grade & 3 parts of sand (all by weight), etc, complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), finished even and smooth without using extra cement complete all as specified.as in floors etc, complete all as specified and directed.
Excavation in trenches, not exceeding 1.5 m wide and n exc 1.5 m in depth getting out in hard/dense soil etc, complete all as specified and directed.
Excavation in post holes not exceeding 0.5 cum each getting out , returning filling in and ramming earth around in layers not exceeding 25 cm each all as specified in hard/dense soil including removal of surplus soil upto 50 mtrs distance etc, complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick etc, complete all as specified and directed.
Removal of excavated and demolished material to a distance exc. 1.50 km but n exc. 5km and depositing etc, complete all directed by Engr-in-charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all directed by Engr-in-charge.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundations, filling and mass concrete etc, complete all as specified and directed.
Demolition of reinforced cement concrete n.exc 15 cm thickness including cutting of reinforcement to facilitate demolition, complete all directed by Engr-in-charge.
Dismantling boarding, any description, fixed in any position with nails complete all as directed by Engr-in-charge.
Dismantling tiles flooring/dado, hearth including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premised etc, complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6, etc, complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 450x350x7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick rendering in CM (1:4) etc, complete all as specified and directed.
M&L for vitrified ceramic tiles light shade double charged 10 mm thick (square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete and all as specified
M&L for vitrified ceramic tiles light shade double charged 10 mm thick (square/rectangular) of size 1200mm x 900mm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete and all as specified
Cutting into existing manholes for connecting new drain, making good to pipe, rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) smooth finished, and reforming benching as required for pipe for internal dia 150 mm etc, complete all as specified and directed.
M&L for RCC type M-25 mix using 20mm graded crushed stone aggregates as Beam cantilevers bressummers lintel over 1.5m span including form work complete all as specified and as directed by the Engineer-in-Charge.
M&L for RCC M-25 mix type B1 (using 20mm graded crushed stone aggregates) as in lintels upto1.5m span clear span, cills similar bands, plinth course, parapets and railings upto 60 cm in height, coping, kneelers apex stones,bed plates, kerb not provided for item 4028, water troughs and like including weathering , slightly rounded or chamfered angle throating and form work complete all as specified and as directed by the Engineer-in-Charge.
M&L for Pre-cast reinforced cement conc. 1:2:4 type B-1 (using 20mm graded crushed stone aggregate)in cover slab and the likes and set in cement mortar 1:4 complete including necessary form work and demolition of existing cover slabs reinforcement cut as required to facilitate demolition etc, complete all as specified and directed.
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.
All as per serial item No. 60 above but 8mm dia and over upto and including 10mm dia in stirrups,spacers and binders, etc, complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.
M&L for Machine cut kota stone slabs flooring 20-25mm thick, as in riser of steps, skirting, dado and piller laid over and including screed bed 15mm thick in CM (1:4) including rubbing and polishing, rounding or bullnosing the exposed edges etc, complete all as specified and directed.
S&F in repair Vitreous China wash basin, white Flat back, size 550x400 mm including brackets, waste cupling and waste pipe , etc, complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, complete all as specified and directed.
S&F in repairs Health faucet including 1.00m flexible pipe with brass nuts for EWC, etc, complete all as specified and directed.
S&F Plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, etc, complete all as specified and directed.
S&F in repairs PVC valve less syphon action type low level flushing cistern, white 10 litres capacity with inlet ball valve, float valve, push button type handle, brackets, including telescopic flush pipe 32mm dia of PVC with long bend of 32mm dia etc, complete all as specified and directed.
S&F in repair 15 mm dia PVC connection with brass check nuts of length 600 mm etc, complete all as specified and directed.
S&F in repair PTMT grating doom 100 mm dia with cockroach trap fixed properly to the floor and sealed properly and finished with white cement etc, complete all as specified and directed.
S&F in repair 32 mm dia bore PVC flexible pipe for wash hand basin and kitchen sink etc, complete all as specified and directed.
S&F in repairs brass CP pillar tap 15mm for WHB, mixing hot & cold water screwed for iron pipe and fixed etc, complete all as specified and directed.
S&F in repairs brass CP wall Mixer 15 mm for mixing hot & cold water screwed for iron pipe and fixed etc, complete all as specified and directed.
S&F in repairs 15 mm dia bib taps CP brass, fancy type, long body, screwed down, screwed for iron pipe, etc, complete all as specified and directed.
S&F in repairs 15mm dia Angle cock chromium plated brass fancy type, screwed down, high pressure, scrwed both ends for iron pipe, etc, complete all as specified and directed.
S&F in repairs CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, etc, complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, etc, complete all as specified and directed.
S & F PVC Floor trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, etc, complete all as specified and directed.
Cutting chases in stone wall, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, etc, complete all as specified and directed.
Taking down steel water tubing 15 mm bore with all fittings from walls, ceiling and floors, etc, complete all as specified and directed.
Taking down steel water tubing 20 mm bore with all fittings from walls, ceiling and floors, etc, complete all as specified and directed.
Taking down steel water tubing 25 mm or 32mm bore with all fittings from walls, ceiling and floors etc, complete all as specified and directed.
S&F 15mm bore GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors, etc, complete all as specified and directed.
All as per above Srl Item No. 84 but 20mm bore
All as per above Srl Item No. 84 but 25mm bore
S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position etc, complete all as specified and directed.
S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, minimum weight 210gms complete all as specified and directed.
S&F in repair Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe,etc, complete all as specified and directed.
Dismantling of cast iron work of any description, complete all as specified and directed.
S&F 110mm bore PVC (SWR), branch piece Single (single Y) equal or unequal with oval access door, complete all as specified and directed.
S&F 110mm PVC bend, complete all as specified and directed.
S&F 75mm bore PVC (SWR), branch piece Single (single Y) equal or unequal with oval access door, complete all as specified and directed.
S&F 110mm PVC cowl, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.
S&F 75 mm PVC SWR vent Cowl, complete all as specified and directed.
S&F 75 mm PVC SWR bend, complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia bore of pipe complete all as specified and directed by Engineer-in-Charge.
M&L Cement concrete in surface channels and drains in cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) finised even and smooth using extra cement, complete all as specified and directed.
Demolition and breaking up 200mm drain pipes (Salt glazedware, AC or reinforced cement concrtete) set in cement mortar,etc, complete all as specified and directed.
S&F 200mm dia reinforced concrete pipe class NP-2 laid and jointed in trenches complete with collars etc, complete all as specified and directed.
S&F Stainless Steel curtain rod of 20 mm dia with Stainless Steel bracket including chromium plated globe at both ends for each door and window opening, rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + .2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes, SS Hinges heavy duty Note:- The rate quoted by the contractor shall include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing and no extra payment shall be admitted at a later date in this respect. Net opening will be measured for payment purpose.
S&F Supply and fixing factory made uPVC white colour fixed glazed window/ hung ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note:- The rate quoted by contractor shall include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing and no extra payment shall be admitted at a later date in this respect.
Supply only galvanised steel wire cloth 0.56mm nominal dia of wire and average width of apurture 1.00m, complete etc, complete all as specified and directed.
S&F Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ .2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. and of approved quality with 6 mm thick figured glass and ss wire mesh of 0.36 mm nominal dia and average width of aperture 1.40 mm, complete all as specified and directed by Engineer-in-Charge. Note:- The rate quoted by the contractor shall include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing and no extra payment shall be admitted at a later date in this respect. The rate quoted shall exclude the cost of glass.
S& F in Repair double bowl stainless steel kitchen sink, 1.00mm thick of minimum size 37x18x8 inches all as specified and directed by Engineer-in-Charge.
"Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge"
M&L for dismantling timber scantling fillets rails, post rafters, prlins etc under 40 sq.cm in section all as specified and directed by Engr-in-Charge".
M&L complete removal of existing treatment and applting two coats of oil bound distember on ceilings over 3mm thick wall care putty complete all as specified and directed by Engr-in-Charge"
Taking down old unserviceable/deteriorated batten/PVC/old rusted steel conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1:3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.
Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specified and directed by Engineer-in-Charge.
Concealed point wiring using colour coding on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead/telephone socket etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putti or distemper / colour wash with same existing colour surfaces, for One light, fan, bell point controlled by one switch. all as specified and directed by Engineer-in-Charge
All as per above Srl Item No. 118 but for One light point controlled by two 2-way switch
All as per above Srl Item No. 118 but for One 5 Amp socket point controlled by one switch on the same board
All as per above Srl Item No. 118 but for 5 Amp independent socket point controlled by one switch.
All as per item No. 118 but here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, multi-stranded copper conductor, 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, multi-stranded copper conductor, stranded 1100 volt grade cable as continuous earth lead.
S&F Modular switch single pole one way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specified .
S&F Modular Switch single pole two way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specified .
S&F Modular Switch single pole one way 16/20 Amps, 240 volts, white finish, ISI marked complete all as specified .
S&F Modular Socket outlet 5 pin, 5 Amps, 240 volts white finish, ISI marked complete all as specified.
S&F Modular Socket outlet 2 in 1, 3 pin, 5 &15 A, 240 volts white finish, ISI Marked complete all as specified.
S&F Modular Bell push, flush type 5 Amps white finish, ISI Marked complete all as specified.
S&F Modular metal flush box 1/2 module with all fittings duly grouted in wall complete all as specified and directed.
S&F Modular metal flush box 3 module with all fittings duly grouted in wall complete all as specified and directed.
S&F Modular metal flush box 4 module with all fittings duly grouted in wall complete all as specified and directed.
S&F Modular metal flush box 6 module with all fittings duly grouted in wall complete all as specified and directed.
S&F Modular white cover plate with frame 1/2 module complete all as specified and directed.
S&F Modular white cover plate with frame 3 module complete all as specified and directed.
S&F Modular white cover plate with frame 4 module complete all as specified and directed.
S&F Modular white cover plate with frame 6 module complete all as specified and directed.
S&F Door bell multi music type 230V, single pole, ISI Marked complete all as specified and directed.
S&F Ceiling rose, surface bakelite, 65 x 20 mm three terminal, ISI marked complete all as specified and directed.
S&F Lamp holder insulated body with back plate suitable for angle / batten fitting ISI Marked, complete all as specified and directed.
S&F Sheet metal enclosure VTPN MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 200 A copper bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB's when MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed.
S&F Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed.
S&F Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed.
S&F in repalcement MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs, complete all as specified and directed.
All as per above item srl Item No.139 but SPN 16-32 Amps, complete all as specified and directed.
S&F MCCB 100 Amps, 3 Pole, 415V, 16 KA thermal magnetic adjustable type with short circuit and overload protection complete all as specified and directed.
Sheet metal enclosure, 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly complete all as specified and directed.
Sub main wiring with two single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 10 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 6 Sqmm PVC insulated unsheathed multi stranded copper FRLS conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed.
Supply and fixing ultra mordern LED luminaire 600 mm x 600 mm, 35/36 watt, 6000 K 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed.
S&F Decorative ultra slim linear LED lighting fixtures with extruded polycorbonate environmental friendly energy saver LED light fitting 1x16/20/22 watt (4'), 230 Volts, single tube mounting including LED Tube 20/22 Watt, AC decorative type complete with electronic driver spring loaded rotory type lamp holder, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to led light fitting complete all as specified and directed.
All as per above item ser item No.149 here-in-before but 1x10/12 Watt (2') mirror type with high output diffuser , complete all as specified and directed.
S&F Decorative LED wall light fixture made up of polycarbonate body suitable for 9 W LED lamp B22 base, 230 Volts, including LED lamp 9 Watt complete and electrical connection with three core copper cable of suitable size from ceiling rose to LED light fitting etc, complete all as specified and directed.
Supply and fixing building security light fitting new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including thermal management in multiple optics of 25 watt LED, 240 Volts incl bracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25 x 6 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 6mm thick FI nuts, bolts etc, all as specified and directed.
Supply, fixing, installation and testing of ISI marked, energy efficient, water heater storage type made of ultra-thick super cold rolled steel plates, incoloy glass-coated heating element offering superior heating performance, electrically operated, single phase, 50 Hz (BEE 5 star rating), complete of 25 Ltr capacity suitable to withstand 8 bar pressure with whirlflow technology and adjustable knob for convenient setting of temperature with and including supply and fixing, wire armoured 450 mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, anchor fastner - 04 Nos of suitable size , 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect etc, all as specified and directed including taking down old unserviceable geyser . Note : Old unserviceable geyser is to be deposited to MES store yard.
Supply and fixing heavy duty exhaust fan AC single phase 230/240 V of size 300 mm sweep 1400 RPM with louver & shutter including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan including taking down old unserviceable exhaust fan all as specified and directed by the Engr-in-charge Note : Old unserviceable Exhaust fan is to be deposited to MES store yard.
Supply and fixing exhaust fan AC single phase 230/240 V of size 250/300 mm sweep, 1200 RPM made of sturdy engineering plastic with louver & shutter and copper winding including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and grouting on wall complete and making good the wall surface after fixing of exhaust fan complete all as specified and directed by the Engr-in-charge.
Supply and fixing LED Lamp 12 watt, 240 volts complete all as specified and directed.
M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B-O, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Part-I, 2009 specification. Note : Result of the earthing should be less then 4 ohms if not achieved the new earthing to be carried out without any extra cost. (Note:- Up to 7.5 Mtr length of GI pipe and GI wire shall be deemed to be included in unit rate quoted by tenderer.
S&F copper strip 20x3mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints, etc complete all as specified and directed.
S&F GI tubing light grade 50 mm dia, cut to size and bent to shape all as required at site including fixing arrangement with necessary clamps of required size at site and providing appropriate size of insulators to pipe from foundation of air termination rod , etc complete all as specified and directed.
M&L for air termination single pointed copper rod 12mm dia and 300mm long etc complete all as specified and directed.
M&L for test point terminal block made of gun metal or phosphorus bronze of size 75X75X6mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal head screw etc complete all as specified and directed.
Earthing complete with copper earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt after mixing with BFC (Back Fill Compound) inadeqate quantity as recommended by the manufacturer or as directred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge. (Note:- Up to 7.5 Mtr length of GI pipe and GI wire shall be deemed to be included in unit rate quoted by tenderer.
Supply, laying testing and connecting 95 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge.
Supply, laying testing and connecting 120 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugsetc, etc complete all as specified and directed.
Sand cushioning to under ground cable 8 cm thick layer below the cable and 15cm thick above the cable including pinning down to 18cm thick etc complete all as specified and directed. Note : Consolidated thickness (18cm) shall be measured for payment purpose.
Brick protection with well burnt sub class ‘B’ brick a butting each other( width wise) across the cable laid in trenches , etc complete all as specified and directed.
Fabrication, installation and testing of Feeder Pillar KIOSK type floor mounted dust/vermin proof indoor type of size 1.2x1.5x0.6 mtr, CPRI approved factory fabricated made out of MS sheet of thickness 3.15 mm mounted on angle iron legs made out of angle iron of size 40x40x6 mm with front & rear opening with locking arrangement, containing bus bar chamber to accommodate 3 phase & 1 neutral copper busbar of size 40x10 mm fixed on epoxy based insulators in horizontal position in upper part of panel separate chambers for 01 No. incomming MCCB and 03 Nos. outgoing MCCB connected to busbar by copper strip of size 20x5 mm duly drilled hole for cable connectioin and powder coated with 7 tank process all as required at site or as directed by Engr-in-charge (including the PCC foudation of panel) complete including of following :- (a) MCCB 160 Amps FP 25KA (thermal, adjustable type, O/L & S/C Protection) - 01 No (I/C). (b) MCCB 100 Amps 3P 25 KA -02 Nos (O/G) (c) MCCB 63 Amps 3P 25 KA -02 Nos (O/G) (d) Digital Multi-function meter with CT's of required cap – 01 No. (e) LED type Indicator lamps (R, Y. B) – 01 Set. All accessories pre wired with suitable size copper conductor cable including making necessary arrangements for fixing all as required at site or directed. NOTE : (1) All connections to be done with proper size copper / Brass Thimbels. (2) Control circuit wiring to be done with S/C copper wire complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to GI strip 25X4 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt in adeqate quantity as recommended by the manufacturer or as directed by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge. (Note:- Up to 7.5 Mtr length of GI pipe and GI wire shall be deemed to be included in unit rate quoted by tenderer.
Taking up or down steel tubing of 50mm bore and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete with all fittings & valves etc, complete all as specified and directed. Note: (Excavation shall be measured and paid separately under relevent items)
Material and labour for laying tubes medium grade galvanized with all fittings laid in trenches of size 50 mm bore dia , etc, complete all as specified and directed.
S&F Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 50 mm and length a etc, complete all as specified and directed.
S&F Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 25 mm and length as required on site or directed by engineer-in-charge.
pardeep singh marwaha
M/S KANWAR VIKAS SINGH
JP AND CO.
Bidder Name
pardeep singh marwaha
JP AND CO.
Havish Construction
M/S KANWAR VIKAS SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .