REPAIR TO CERTAIN STEEL FURNITURE INCLUDING PAINTING UNDER BSO OF GE (WEST) FEROZEPUR CANTT

Amount

ALMIRAH LARGE / MEDIUM STEEL S&F as in replacement of unserviceable legs made out of PBI sheet 1 mm thick of almirah large steel including cutting, welding, turning, bending etc all as shown on drawing No FD-67(M), FD-350 & FD-1031, complete all as specified and directed.

All as per ser item No. 1 here-in-before but replacement of unserviceable Shelves made out of PBI sheet 1 mm thick.

All as per ser item No. 1 here-in-before but replacement of unserviceable Mild steel chromium plated(CP) handle 120 mm of approved quality

All as per ser item No. 1 here-in-before but replacement of unserviceable Mild steel lock 65 mm with screw, key plate and keys of approved quality

All as per ser item No. 1 here-in-before but replacement of unserviceable Locking device complete as per drawing

All as per ser item No. 1 here-in-before but replacement of unserviceable Locking device cover as per drawing

All as per ser item No. 1 here-in-before but welding to Almirah large steel

LOCKER STTEL S&F as in replacement of unserviceable legs made out of PBI sheet 1 mm thick of Locker steel including cutting, welding, turning, bending etc all as shown on drawing No FD-1029, complete all as specified and directed.

All as per ser item No 8 here-in-before but replacement of unserviceable bottom sheet made out of 1 mm thick ms sheet.

All as per ser item No. 8 here-in-before but replacement of unserviceable stainless steel (CP) coated handle 100 mm

All as per ser item No. 8 here-in-before but replacement of unserviceable MS hasp and stapple 75 mm.

S&F as in replacement of unserviceable PBI parts of almirah large/ med steel including cutting, welding, turning, bending etc. Parts should be made out of PBI sheet 1 mm thick all as shown on drawing No FD-67(M), FD-350, FD-1031 & FD-1032, rest complete all as specified and directed.

TABLE DINING OR STEEL AL TOP S&F as in replacement of unserviceable Top made out of 19 mm thick block board commercial Ist quality covered with aluminium sheet 24 guage thick with steel screws including cutting, welding, turning, bending etc of unserviceable components /parts of table dining OR's steel all as shown on drawing No FD-84(M), complete all as specified and directed. Note:- Table top shall be in one piece and Joints in particle board shall not be accepted.

All as per ser item No. 13 here-in-before but replacement of unserviceable Top frame, side, legs and stiffeners made out of MS square conduit 25 mm having 1.6 mm wall thickness.

All as per ser item No. 13 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

TABLE OFFICE OFFRS STEEL S&F as in replacement of unserviceable table top made out of 18 mm thick Prelaminated particle board commercial quality bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails with polish the beading, including cutting, welding, turning, bending etc rest all as shown on drawing No. FD-84M/1003 and complete all as specified and directed. Note:- Table top shall be in one piece and Joints in particle board shall not be accepted.

All as per ser item No. 16 here-in-before but replacement of unserviceable drawer rcomplete including necessary denting, repairing, welding bottom channel.

All as per ser item No. 16 here-in-before but welding to table office officer steel

All as per ser item No. 16 here-in-before but replacement of unserviceable Rubber Shoes black in colour of approved quality.

TABLE OFFICE CLKS STEEL S&F as in replacement of unserviceableTable top made out of 18 mm thick Prelaminated particle board commercial quality bonded with phenol formal dehyde including 4mm thick teak wood beading beading all around the table fixed with nails with polish the beading including cutting, welding, turning, bending etc, rest all as shown on drawing No. FD-84M/1004 and complete all as specified and directed. Note:- Table top shall be in one piece and Joints in particle board shall not be accepted.

All as per ser item No 20 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per ser item No 20 here-in-before but welding to table office clks steel

All as per ser item No 20 here-in-before but replacement of rubber shoe of approved quality.

TABLE 900MMX900MM STEEL S&F as in replacement of unserviceable Table top made out of 18mm thick Prelaminated particle board teak faced bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails all as shown in drawing, including cutting, welding, turning, bending etc all as shown on drawing No FD-1009 and directed.

All as per ser item No. 24 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per ser item No. 24 here-in-before but welding to Table steel

TABLE 900mmX600mm STEEL WITHOUT DRAWER S&F as in replacement of unserviceable Table top made out of 18 mm thick Prelaminated particle board teak faced bonded with phenol formal dehyde including hard wood (Teak) beading 19mmx6mm all around the table fixed with nails all as shown in drawing of table 900mmx600mm steel without drawer including cutting, welding, turning, bending etc all as shown on drawing No FD-1007, as specified and directed. Note:- Table top shall be in one piece and Joints in particle board shall not be accepted.

All as per ser item No. 27 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per ser item No. 27 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

TABLE 900mmX600mm STEEL WITH DRAWER S&F as in replacement of unserviceable Table top made out of 18 mm thick Prelaminated particle board teak faced bonded with phenol formal dehyde including hard wood (Teak) beading all around the table fixed with nails with polish the beading, rest all as shown in drawing of table 900mmx600mm steel with drawer including cutting, welding, turning, bending etc all as shown on drawing No FD-1008, complete all as specified and directed. Note:- Table top shall be in one piece and Joints in particle board shall not be accepted.

All as per ser item No. 30 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per ser item No. 30 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

All as per ser item No. 30 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel.

CHAIR CBA STEEL S&F as in replacement of unserviceable bottom seat of chair CB steel with arms made out of 1st class seasoned hard wood sheesham duly caned with 2mm to 2.5 mm wide white cane plastic as Godrej Pattern including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel with arm all as shown on drawing No FD-75, complete all as specified and directed. Makes of cane: - SHAH/Premier or equivalent in approved makes

All as per ser item No. 34 here-in-before but replacement of unserviceable back.

All as per ser item No. 34 here-in-before but replacement of unserviceable arm made from 1st class seasoned sheesham wood of chair steel with arms including two coats of synthetic enamel paint black over a coat of pink primer.

All as per ser item No. 34 here-in-before but S&F flat iron 535mmx25mmx6 mm as in stiffener to support seat frame of chair CB steel with arms including cutting welding etc.

CHAIR CBB STEEL S&F as in replacement of unserviceable bottom seat of chair CB steel without arms made out of 1st class seasoned hard wood sheesham duly caned with 2 mm to 2.5 mm wide white cane plastic as Godrej Pattern. including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel without arm all as shown on drawing No FD-75, complete all as specified and directed. Makes of cane: SHAH/Premier or equivalent in approved makes

All as per ser item No. 38 here-in-before but replacement of unserviceable back.

All as per ser item No. 38 here-in-before but S&F flat iron 420mmx25mmx6mm as in stiffener to support seat frame of chair CB steel without arms including cutting welding etc.

FMN SET Painting of FMN set of charpoy GI pipe/newar with black Japan paint with brush including welding complete all as specified and directed.

FORM WITHOUT BACK Removing old unserviceable parts/ components of form without back off size/shape and materials all as specified and directed as shown on drawing. Replacement of unserviceable wooden planks made of 2nd class hard wood 1525mmx255mmx25mm thick fixed with GI nut & bolt 65mm x 6mm with washer complete all as specified and directed as shown on drawing No. FD-1027 complete all as specified and directed.

M&L for French polish on wooden plank and two coats of synthetic enamel paint over a coat of primer on steel surface. Drawing No. FD-1027

TEAPOY VARANDAH STEEL S&F as replacement of the following unserviceable component/parts of Teapoy verandah steel including cutting, welding, turning bending etc complete all as specified and shown in drawing Teapoy top made out of 18mm thick Prelaminated particle board of white bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails rest all shown in drawing No. FD-383 complete all as specified and directed. Makes:- Novapan, Century ply, ActionTessa or equivalent in approved makes.

Replacement of MS Flat iron 490mmx20mmx3mm to be welded with frame under bottom seat complete all as specified and directed.

Replacement of unserviceable rubber shoes of approved quality to teapoy verandah complete all as specified and shown on drawing complete all as specified and directed.

TEAPOY VARANDAH MAP S&F in replacement of unserviceable Top of Teapoy verandah MAP. Teapoy top made out of 18mm thick Prelaminated particle board of white bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails rest all shown in drawing No. FD/E6/MAP/17 complete all as specified and directed. Make- Novapan, Century ply, ActionTessa

Charpoy GI pipe Removing of old unserviceable newar from charpoy GI pipe (Drawing No. FD-220) and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with 75 mm long x 6 mm dia full threaded nut and bolts with washer in bothside by drilling 2 Nos of hole in long rail and 2 Nos of hole on short rails. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and directed. Makes: - Archid Ply/Kitply/Anchor

S&F new iron strip to be welded with long rail of Charpoy GI pipe (Drawing No. FD-220) size 900mmx30mmx5mm thick duly black painted in 2 Nos on long rails below ply wood top complete all as specified and directed.

Removal of unserviceable long rail from existing frame of charpoy of GI pipe and supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked all as specified and shown on drawing No. FD-220 complete all as specified and directed.

Removal of unserviceable short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unserviceable long rail retrieved from charpoy GI pipe against ser No. 50 here-in-before after cutting threading of both ends to the requires size complete all as specified and shown on drawing complete all as specified and directed.

Removal of unserviceable leg from existing frame of charpoy GI pipe and fixing legs by making from unserviceable short rail retrieved from charpoy GI pipe as per ser item No. 51 here-in-before including cutting threading complete and providing best quality PVC shoe to the legs of charpoy GI pipe complete all as specified and directed.

Removal of unserviceable elbow three way 32mm bore from existing frame of Charpoy GI pipe and supply and fixing new elbow GI three way 32mm bore medium grade ISI marked all specified and shown on drawing No. FD-220 complete all as specified and directed.

Removal of unserviceable check nuts from existing frame of charpoy GI pipe & supply and fixing new check nuts GI 32mm bore medium grade ISI marked all specified and shown on drawing No. FD-220 complete all as specified and directed.

Tightening of charpoy GI frame any size complete all as per drawing complete all as specified and directed complete all as specified and directed.

Welding of FMN clamps to the legs of charpoy GI pipe all as per drawing complete all as specified and directed complete all as specified and directed.

Bed Hard Map Removing of old unserviceable plywood from Bed Hard MAP and supply and fixing new 12 mm thick plywood BWR grade ISI Marked of required size and shape including S&F necessary nut and bolts and washer whereever required to Bed Hard MAP as shown in drawing No. FD/E6/MAP/8 (R) complete all as specified and directed.

S&F of following components/parts of Bed Hard MAP in replacement of unserviceable head rest made out of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood beading all round the top of Bed hard MAP including dismantling of unserviceable components all as specified shown on drawing No. FD/E6/MAP/8 (R) complete all as specified and directed.

All as per ser item No 57 here-in-before but replacement of unserviceable foot rest of Bed hard MAP, rest all as per drawing.

Charpoy MS Pipe : Removing of old unserviceable plywood from Charpoy MS Pipe and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with S&F necessary nut and bolts including washer to bothside of Charpoy MS pipe as shown in drawing No. FD/MAP-II/01 Rest complete all as specified and directed. Make : Archid Ply/Kitply/Anchor

Charpoy Folding : Removing of old unserviceable plywood from charpoy folding and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with necessary nut, bolts and washers to Charpoy folding . Corners of plywood fixed on charpoy should be rounded properly complete all as specified and directed. Make : Archid Ply/Kitply/Anchor

Charpoy GI pipe ply Top : Removing of old unserviceable ply top from charpoy GI pipe (Drawing No. FD-220) and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with 75 mm long x 6 mm dia full threaded nut and bolts with washer in bothside by drilling 2 Nos of hole in long rail and 2 Nos of hole on short rails. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and directed.

PAINTING TO STEEL FURNITURE M&L for painting to Almirah steel medium with shelves complete internal and external including top and bottom. after preparation of old painted surface and making smooth surface for spray painting inside/outside with synthetic enamel paint olive green, black or white shaded as per drawing No FD-67(M) complete all as specified and directed.

All as per ser item No 63 here-in-before but on Almirah steel medium with shelves complete external including top & bottom.

All as per ser item No 63 here-in-before but on almirah large with shelve complete internal and external including top and bottom as per drawing No FD-1031/MAP.

All as per ser item No 63 here-in-before but on almirah large with shelves complete external including top and bottom as per drawing No FD-1032/MAP.

All as per ser item No 63 here-in-before but on Locker steel complete internal and external including top, bottom & shelves as per drawing No FD-222

All as per ser item No 63 here-in-before but on Locker steel complete external including top & bottom and shelves as per drawing No FD-223

All as per ser item No 63 here-in-before but on Form without back

All as per ser item No 63 here-in-before but on Table office clerk steel as per drawing No FD-84(M)

All as per ser item No 63 here-in-before but on Table office officer steel as per drawing No FD-84(M)

All as per ser item No 63 here-in-before but on Table 900mmx900mmx760mm steel as per drawing No FD-1009

All as per ser item No 63 here-in-before but on Table 900mmx600mmx760mm steel with drawer/without drawer as per drawing No FD-1007

All as per ser item No 63 here-in-before but on Teapoy verandah as per drawing No FD-255/MAP

All as per ser item No 63 here-in-before but on Chair CB steel with or without arm as per drawing No FD-75(M)

All as per ser item No 63 here-in-before but on Rack/ Book Case steel.

All as per ser item No 63 here-in-before but on Chair verandah as per drawing No FD-256 & 259

All as per ser item No 63 here-in-before but onTable dining OR steel AL top as per drawing No FD-84(M)

All as per ser item No 63 here-in-before but painting to Bed Hard MAP.

All as per ser item No 63 here-in-before but to charpoy MS pipe.

All as per ser item No 63 here-in-before but to charpoy Folding.

S&F in replacement of unserviceable Teak wood beading of all round the top of verious type of wooden furniture, all as per shown in drawing.

M/s Sham and Company

shivam builders