Repairs to sunken floor sanitary fittings roofs flooring plastering internal water supply and other connected works at Auto Wing Electronics Wing of SOTT area under AGE B/R-I at GE(N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block/brick masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

All as per Item No. 7 (here-in-before) but n.exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding 1.00 sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M & L for for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L for for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

M&L for light shade vitrified ceramic tiles, 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.38 sqm, in floor etc. laid including 15mm thick screed bed in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed in white and coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

All as per item No 14 (her-in-before) but on skirting and 10 mm thick backing coat in cement and sand mortar (1:4)

Material and labour 17-18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with fly ash straight or curved on plan exc 6m radius built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap flushing and ante syphonage pipe all as directed Cat part No C0287(S)/88(P) Incl Seat Cat part No E8309 of Parryware or equivalent in Hindware / Cera

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge Make :- Cat part No C0117 of parryware or Cat Part No 20042 of Hindware or equivalent in Cera

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No S2040111 & S 2090107 of Cera or equivalent in Parryware, Hindware

M & L for Complete removal of existing treatment on plastered and applying 3 mm thick wall care putty (Birla) including crack filling and applying two coats of Oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint on wall over a coat of primer on wall etc complete all as specified and directed by Engineer-in-Charge

Preparing old painted surfaces of wall and applying one coats of cement based paint etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of old plastered surfaces of wall and applying two coats of cement base paint on wall etc complete all as specified and directed by Engineer-in-Charge

M&L prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surafces of walls etc and applying one coat of white wash etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 31 (here-in-before) but one coat of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

All as per item No 33 (here-in-before) but on steel surfaces

Supply and fix 2 nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet etc complete all as specified and directed by Engineer-in-Charge Make :- Sintex or Equivalent as apprived by GE.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site etc complete all as specified and directed by Engineer-in-Charge Make :- Sintex or Equivalent as approved by GE

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long.

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long.

Supply and fix aluminium anodised handles of extruded section 150mm long.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

S&F in repair fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , fixed in repairs etc complete all as specified and directed by Engineer-in-Charge Make :- Cat part No MOR 1020A(Orintal series) of Marc of equivalent in PLUMBER, ESS).

S&F fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs 15 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge Make :- Cat part No MOR 1010A(Orintal series) of Marc of equivalent in PLUMBER, ESS).

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed Make:- (Cat part No MARC MSR 1050 (shower) and MARC or equivalent in make Plumber, ESS-ESS

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm.

Dismantling of water tank from any position/location, of any make etc, of capacity exc 500lt & n.exc 1000 ltr with ball valve, etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, double layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as directed.

All as per item No 54 (here-in-before) but 1000 ltrs etc.

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC viterous china squatting pan 580x440mm with integral footrests/pedastal pan incl seat cover, white, area of WC exc 1.50 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge Make : Super Thermolay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as as directed Make :- Cat Part No 563 Make Plumber or equivalent

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge Make :- Cat part No UO911 of Plumber or equivalent in MARC, ESS-ESS

M&L machined pressed precast concrete interlocking paver block glossy with grey cement and pagment, any shpae and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over a stone dust cushion of 50mm thick etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in cement amd sand mortar (1:6) and 5mm thick finishing coat in cement and sand mortar (1:4) , finished even and smooth without using extra cement including M & L for WPC etc complete all as specified and directed by Engineer-in-Charge

S&F 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm are and not exceeding 0.5 sqm fixed with cement slurry and back coating of 10mm thick and including polishing, rubbing & Including silicon treatment complete all as specified

Supply and fixing in repair vitreous China bowl urinal flat back, size of 270X360X450 mm, white, with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:4 complete all as specified and as directed.Make :- Cat Part No C0501 Of Parryware or Cat Part No 60001 Of Hindware.

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge Make :- Parryware/Hindware/ Cera

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples as fixed etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets etc complete all as specified and directed by Engineer-in-Charge Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware or equivalent in Cera

M & L for for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for for providing water proofing treatment on roofs as per latest zonal specification , as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) M & L for Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.25 ltrs/sqmts and allow to dry. (b) M & L for Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts with white gravel/mineral finished by thermofusion process. (c) Plastering 10 mm in cement and sand mortar (1:3) using 100% course sand on roof mixed with & including M & L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement.

M&L for Fe 410 -W (GdeE- 250) quality A Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs aluminium extruded section door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F in repars concealed star lock powder coated for aluminium window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge Make : Jindal/Hindalco

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately under relevant item of this BOQ)

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately under relevant item of this BOQ)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction etc complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) etc complete all as specified and directed by Engineer-in-Charge

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

Taking up and down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 82 (here in before ) but 20 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 86 here in before but 25 mm or 32 mm bore etc complete all as specified and directed by Engineer-in-Charge

S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 85 (here- in- before ) but 20 mm bore of pipe

All as per Sl item No. 85 (here -in- before ) but 25 mm bore of pipe

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s) etc complete all as specified and directed by Engineer-in-Charge

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs stainless steel grating, 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

Taking down and opening the existing Steel rolling shutter, pull push type, not exc 12 sqm each in area as clear opening, including hood cover, cleaning the sides guides , suspended shaft, anti guide channels, straightening/rolling shaft and replacement of bolts & nuts after greasing all the moving parts of rolling shutter and refixing in the same opening to make it for smooth functioning etc complete all as specified and directed by Engineer-in-Charge

All as per item No 94 (here-in-beofre) above but gear operated shutter area exc 12 Sqm but not exc 25 sqm each including adjustment of gear assembly etc complete all as specified and directed by Engineer-in-Charge

Supply , fixing and errecteing in position in repairs steel rolling shutters with thickness of laths 1.25 mm , push pull or manual type with out ball bearing including top cover, bottom plate,anchoring rod, hasp and staple, mild steel handle including applying one shop coat of red oxide primer, erected in position etc complete all as specified and directed by Engineer-in-Charge Note: Net area of opening shall be measured for purpose of payment.

An amount of Rs 41,259.00 shall be deducted from BOQ on account of schedule of credit

Priyadeep Construction

Ms. M.D. Auty

OM SAI ASSOCIATES

M/S Bhima Construction

MS. A.S. CONSTRUCTION

M/s. Sagar Traders