Increasing capacity of Distribution of transformer and other electrical work against System Augmentation/Strengthening works in different district 2023-24 under jurisdiction of EDD, CESS-III and IV, Lesa, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

a- Line Material

b- TF 63 KVA

c- TF 100 KVA

d- TF 250 KVA

e- LT PVC Cabel 1x400/1x630/1x240/3.5x240 sq.mm.

f- ABC 3x95/3x50/3x120 sq.mmm

g- PCC Pole 8.5 Mtr. Long

h- Pin insulator polymeric

i- Disc Insulator

j- GI wire

k- Stay set

L-11 KV X-Arm

M- ACSR weseal conductor

n-Earthing Rod

o- Stay Wire

Dragging of PCC Pole digging of pit erection of sub-station type double pole structure on PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Dragging of ST/PCC Pole to pit site, diging of pit erection and grouting (As per RESPO Norms) of 11 KV 11/8.5 Mtr Long ST/PCC Pole with, fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Guarding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department.

Grouting & Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Laying Stringing & sagging of 3 Phase 3 wire 11 KV New Line on ACSR Weasel/Racoon conductor as per RESPO Specification and direction on E/I. All material except ACSR weasel/Raccoons conductor shall be supplied by the contractor.

Guarding of HT line by GI wire. GI wire shall be supplied by the department.

Proper laying & commissioning of (3x120/3x95/3x50 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Well type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type Tailless Fuse Unit, 3 Nos coper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Supply and fixing of Aluminum Lug for 250 KVA TF as per RESPO Norms.

Supply and fixing of Copper L-Piece for 250 KVA TF as per RESPO Norms.

Supply and fixing of 11 KV DO fuse set as per RESPO Norms.

Fabrication, errection & commissioning of 63 KVA T/F on DP with all accessories. All material except 63 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 100 KVA T/F on DP with all accessories. All material except 100 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Dismantling of 63 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 25/16/10 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 100 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Laying of LT PVC Cable 1x400/1x630/1x240/3.5x240 sq.mm. as per RESPO Norms. Only cable shall be supplied by department.

GST Extra as per Rules

GST Extra as per Rules

P. K. POWER SOLUTIONS

SINLESS ELECRICAL CO. PVT. LTD.