Work of Extension in Control Room Building for Installing 11KV CB at 220 KV S/S Badal

Amount

Earth Work in Excavation in foundation trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed with in lead of 30 metres.

Earth Filling under Floor with surplus ordinary soil or soil containing gravel or kankar up to 40 % excavated from outside the building plinth in 15cm layers i/c ramming,watering and consolidating lead up to 30 mtr.

Dismantling Brick work in cement

Dismantling PCC 1:8:16

Dismantling RCC

Dismantling cement conglomerate floor 25 to 50mm thick without concrete base

Shuttering for faces of concrete fdns and fdns. Beam & Plinth Beam.

Centering and Shuttering for Columns.

Shuttering for sides and soffits of beams

Shuttering for suspended roofs

Cement Concrete 1:8:16 with stone aggregates 40mm gauge(mixing by mechanical means using Concrete mixer volumetric type.

Cement Concrete 1:6:12 with stone aggregates 40mm gauge(mixing by mechanical means using Concrete mixer volumetric type.

Cement Concrete 1:5:10 with stone aggregates 40mm gauge(mixing by mechanical means using Concrete mixer volumetric type.

Cement Concrete 1:2:4 with stone ballast or shingle(mixing by mechanical means using Concrete mixer volumetric type.

Reinforced cement Concrete M-20 mechanically batch mixed using batch type Concrete mixer as per IS:791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth.

Reinforced cement Concrete M-20 mechanically batch mixed using batch type Concrete mixer as per IS:791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in Superstructure.

Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.

First Class Burnt Brick Work laid in cement sand mortar 1:6 in Foundation and plinth.

First Class Burnt Brick Work laid in cement sand mortar 1:6 in parapet.

First Class Burnt Brick Work laid in cement sand mortar 1:5in fdn & plinth.

First Class Burnt Brick Work laid in cement sand mortar 1:5in s/str.

First Class Burnt Brick Work laid in cement sand mortar 1:4 in fdn

First Class Burnt Brick Work laid in cement sand mortar 1:4 in Superstructure

Extra for work done in additional storey up to 4m above the top of structural roof of lower storey

Extra for work done in single storey exceeds 4m in height

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

Terracing consiting of tiles 22.86 x 11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean afterwire brushing etc.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6 m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3

CC gola 1:2:4 10 cm x 10 cm concave quardant along junction of roof with parapet finished smooth

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge.

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.

Conglomerate floor 25mm thick cement concrete topping 1:2:4.

Conglomerate floor 40mm thick cement concrete topping 1:2:4.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.

Flat brick or tile flooring laid in cement sandmortar 1:4 on 100mm thick cement concrete1:8:16 and 100mm thick sand filling and cement pointed 1:2 on top.

Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using soluble salt technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.

12.5mm Thick Cement Plaster 1:3

12.5mm Thick Cement Plaster 1:4

12.5mm Thick Cement Plaster 1:5

20mm Thick Cement Plaster 1:4

20mm Thick Cement Plaster 1:5

20 mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per sqm laid hot and sanded

Painting with metal Primer on new iron work

Painting two or more coats with anti corrosive Bitumin Paint on chequered plate

Painting two or more coats with aluminium paint

Applying priming coat with cement primer in all shade on newly plastered/concrete exterior surface

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/ 10 sqm over and including base coat of water proofing Cement Paint applied @ 2.2 Kg/10 sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/ neoprene felt etc.-For fixed portion and chaukhats

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Cost of Aluminium fittings complete for doors,windows such as tower bolts, handless and screw etc. for these fittings

P&F hydraulic door closer (size of door 851mm to 1000mm)

P&F 12 mm thick prelaminated particle board in panelling fixed in aluminium doors with decorative lamination on both sides

Providing and fixing glazing in aluminium door,window, ventilator shutters and partitions etc.with PVC Plug/ neoprene gasket etc. complete Float glasspanes of 5 mmthickness

P&F aluminium sliding door bolts 250x16mm

Cold Twisted deformed Bars for RCC works where not including in complete rate of RCC including bending ,binding and placing in position Complete.

Electrical Items

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

wiring fan point with fan box

wiring light point

wiring 6 amp plug control

wiring 16/20amp power plug control point

Supply and erection of PVC insulated FR single core copper conductor cable suitable up to 1100 volts grade

overall size 2.5 sqmm

overall size 4 sqmm

Supply and erection of heavy gauge PVC conduit pipe 25mm dia on surface for wiring purposes including bend ,junction boxes, etc

Supply and erection of MCB single pole 0.5-4amp (10KA,curve-C)for circuit protection against overload and short circuit control fault suitable for 240/415 volts

NON SECHDULED RATES

Providing & Fixing Cable Racks

P&F Angle Iron Nozzing 50x50x3

S&F Tr cover 3'4''x1'6''

S&F Tr cover 2'6''x1'9''

Supplying & spreading of crushed stone ¾” nominal size (20mm)in 3” (100mm) thick layer in the switch Yard Area marked or as per direction of the Engineer-In-Charge i/c levelling & removal of grass at site.

P/F angle iron posts of varioius sizes 75x75x8mm,50x50x6mm

P/F barbed wire in 4 rows complete as per drawing.

P&F GI wire netting mesh of 12 guage 50x50 mesh 180 cms high fastened with 4 nos. MS wire rope 6/7 strand 1/16'' dia each complete in all respects as per Drg. O. HW/TB-5635 R-2 and Arch Drg no. 3 Rs/job no. 112/S and conforming to IS-2721/1974 and 3456/1977 respectevely.

P&F ceiling fans standard make 1400mm sweep with regulator Bajaj/crompton /Gec/Philips /Khaitan

supply & fixing 18'' exhaust fan sweep of crompton make including louver (MODEL T5JB1328EB) of 1x28WT-5

Supply and fixing General purposes tube fitting of crompton make on wall (MODEL DIJB12414EB9) of 1x36W

P&F wire guage 12x22 size in Aluminium section without cost of Aluminium beading.

P&F 5mm thick chequered plate

P&F UC Fencing gate 1mtr wide for stn t/f

LANDING RATES OF MATERIALS(i/c the effect of extra carriage and difference of quarry rates wherever applicable)

Cement

Tor steel & Anchor/fdn bolts

Fine sand

Bricks

Coarse aggregate 13.2/12mm

Coarse aggregate 11.2/10mm

Coarse sand

Stone metal 40mm

BAL KRISHNA ENTERPRISES

sohan lal ramesh kumar