RequiredOEM Authorization Certificate Bid to RA enabled No LED Luminaire (Recessed Luminaire) ( 92 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 Yes * 1/6 (Part 2/Sec.13) Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated Power 20W 20W Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K
Required90 Lm/Watt for 4000 deg K
Required100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 3000 deg K * Type of fixture (in feet) 1x1 (for 18W to 28W) 1x1 (for 18W to 28W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Poly carbonate (UV stabilised) * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * 2/6 Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K
Required>/=120 Lm/Watt for 4000 deg K
Required>/=110 Lm/Watt for 3000 deg K) Yes Yes
RequiredYes
Requiredwith higher efficacy >/=140 Lm/Watt Working life for LED : (Minimum 50
Required000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and >100 M ohm * 3/6 current carrying part The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name
Requiredmodel number
Requiredserial number
Requireddate of manufacture (month- year)
Requiredand lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output
Requiredpower
RequiredPF
RequiredCurrent in Amps
RequiredCRI & CCT etc.
Required) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be Yes * 4/6 furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
