Replacement of Damaged Flooring and other Miscellaneous Work in House No.1117, Sector 32-C, Chandigarh.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:DSR 10.14

Profile C DSR10.14.2

Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.2.1

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : DSR 10.30

4.0 mm thick glass panes DSR 10.30.1

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. DSR 11.41A

Glazed Vitrified tiles Matt/Antiskid finish of size DSR11.41A.3

Size of Tile 600 x 600 mm DSR 11.41A.3.1

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : DSR 12.21

In 75x75 mm deep chase DSR 12.21.1

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. DSR 12.22

12 mm cement plaster of mix : DSR 13.4

1:4 (1 cement: 4 coarse sand) DSR 13.4.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :DSR 13.99

One or more coats on old work DSR 13.99.1

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. DSR 13.83

Two coats DSR 13.83.2

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade DSR 13.112

Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface DSR 13.112.1

Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. DSR14.13

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. DSR 15.23

For thickness of tiles 10 mm to 25 mm DSR 15.23.1

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60

Providing and fixing wooden storage cabinet under work top 2'-0" high & 2'-0'' deep consisting of 19mm thick commercial board ISI marked with 6mm thick commmercial ply on back side including 1 Nos. Horizontal shelf ( as per sketch) . The front side of the cabinet shall be provided with 1mm thick laminate of approved shade and inner surface shall be provided with 0.70mm thick laminate including 20mmx 6mm thick second class teak wood lipping on exposed edges of the board. The rate further include the cost of piano type hinges , S.S handles 4"size, aluminium hasp & staple, magnatic catcher, stainless steel adjusters / lifters, fevicol, nails , screws complete fixed in position tothe entire satisfaction in the Engineer-in-charge. ( Front elevation area shall be measured for payment). NS

Providing and fixing over head wooden storage cabinets 2'-0" high x 1'-0'' deep consisting of 19mm thick commercial board ISI marked (as per sketch) having 1 No. shelf with 6mm thick commercial ply on back side. The exposed surface of the cabinets shall be provided with 1mm thick limate of approved shade and inner surface shall be provided with 0.70mm thick limate . The exposed edges of the board shall be provided with 20mm x 6mm second class teak wood lipping including polishing. The rate further include the cost of piano type hinges, S.S handles 4"size, aluminium hasp & staple, magnatic catcher, fevicol, nails, screws complete fixed in position over wall with the help of dash fasterners complete in all respect to the entire satisfaction of the Engineer-in-charge. (Front elevation area be measured for payment.) NS

Providing and fixing 35mm thick Golden Champ wire gauge door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2" x 3/4” hollock wood beading 3nos 5” Nos hinges aluminium fitting and two nos handles 5” and 1 no tower bolt 8”, 6” and double rubber aluminium door stopper, Single action door spring. Complete fixed in position including the cost of two coats of special quality over one coat of wood primer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS

Providing and fixing 35mm thick Golden Champ (kiln seasoned) Panelled Door consisting of vertical style and side rails 100mm, lock rail 150mm, bottom rail 200mm with 12mm thick water resistance shuttering (ISI marked) with necessary iron hinges 5” (3 No), all necessary Aluminium T. Bolt 8”( 1 No), 6” (1 No), handle 5” (2 No), Sliding bolt1 No., fitting and painting two coats over one coat of primer after preparation of surface (special quality) Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS

Dismantling of wooden storage cabinet including chowkhats, architrave, holdfasts etc ( Front section should be measure for payment ) including Stacking the serviceable material and removing the rubbish and disposing off it to approved dumping ground to the entire satisfaction of engineer in charge . NS

Preparation of plastered of concrete surface for oil bound distemper of emulsion or apex paint including the sand papering the surface applying filling the surface with cement based putty (Birla, JK or equivalent) to required finish complete in all respect and to the entire satisfaction of the engineer-in-charge.NS

Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

Supplying of new FPS Brick tiles class designation 100. NS

Please Enable Macros to View BoQ information