Special repairs to OTM accn of 227 FD Wksp Coy under GE (South), Delhi Cantt-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc. and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in floors laid on 15 mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry at the rate of 3 kg per Sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per Sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and as in floors laid on 15 mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry at the rate of 3 kg per Sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick, as in skirting/Dado laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per Sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm as in floors laid on 15 mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry at the rate of 3 kg per Sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid on 10 mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for re-fixing, 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for re-fixing, 20 mm bore of pipe complete all as specified and directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed..

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed.

S&F PVC connections 450 mm long with brass unions at both ends suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair Concealed stop cock, 15 mm bore, chromium plated ,with long shank and cup, fancy type, complete all as specified and directed.

S&F in repair 15 mm angle stop valves, cast copper alloy , chromium plated, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and directed.

S&F in repairs bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair, PVC valve less , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and directed.

S & F in repair Vitreous china wash basin, white, flat back, size 550 x 400 mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair, including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Taking down rain water pipe (any size) or pattern including all fittings, head shoes, bends swan necks etc. including cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F PVC (SWR) pipes, 110 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S & F PVC(SWR) bends/Tee any radius, 110 mm bore complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats for frame with shutters (without taking off shutter from the frame) exceeding 1.50 Sqm but not exc 4 Sqm each complete all as specified and directed.

S & F Pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube ,supplying and fixing in opening complete all as specified and directed.

S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick factory made II class Hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/gauge etc. divided into squares edges of framing Plain, chamfered or rounded mitred and rebated sash bar any number with cut or mitred beads for securing glass/gauge etc. Size of members of shutters complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site complete all as specified and directed.

S & F Powder coated anodised aluminium frame as in door, window, ventilators and shutter etc. with one or more rebates including joining cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note : (a). Glazing shall be measured separately; (b). Items shall be paid as per weight of aluminium sections ; (c). The rates quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required which shall not be measured for arriving the weight; (d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel all-round contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required , complete all as specified and directed.

S&F stainless steel butt hinges, size 100 mm complete all as specified and directed. .

S&F Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed complete all as specified and directed.

S&F repair aluminium handles , 150 mm size, Fabricated type ,complete all as specified and directed .

S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section and fixed complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description ) from metal frame including punching out or drilling out old glazing pins /springs clips and providing and fixing new one exc 1.5 sqm complete all as specified and directed.

M & L for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all a specified and directed.

S&F in repair stainless steel wire cloth, 0.63 mm nominal dia or wire and Sqm average width or apertures 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows complete all as specified and directed.

M & L for Welding in repairs exc 2.5 cm but not exc. 5 cm in length thickness of metal be welded exc 6 mm but n.exc 9 mm , complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of reinforcement cement concrete of any description and in any position . Including cutting of reinforcement from adjoining RCC component to facilitate demolition complete all as specified and directed. Note:- All scaffolding & T&P up to three storey building required for demolition/ dismantling of RCC shall be part of this item . All Demolished concrete/debris shall be removed same day after cutting of reinforcement from each & every block and same shall be shift from outside cantonment area as complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half thick in CM 1:4 brick wall built in cement mortar complete all as specified and directed.

M & L for Dubbing out average 20 mm thick on irregular face of walls/ Ceiling in cement mortar 1:4 complete all as specified and directed.

M & L for Rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick in cement mortar 1: 3 on concrete surfaces of ceiling, chajja etc. finished even and smooth complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparing newly plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

M & L for Complete removal of existing treatment , from internal surfaces of walls/ ceiling through electrically operated grinder/sand paper, steel patti, washing complete all as specified and directed.

M & L for preparation surface as filling of holes with filler material and applying 3 mm thick wall care putty in two layers including grinding with sand paper & levelling of surface complete all as specified and directed.

M & L for applying two coats of distemper oil emulsion, on white or tinted over existing prepared putty base surface complete all as specified and directed.

M&L for preparation of old surface and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of surface as filling of holes with filler material etc. and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on walls by electrical grinder/ sand paper/ steel patti thereafter preparation of walls by filling of holes and cracks with wall care putty, specified for external surface as required area of surface and applying two coats of Cement base paint over a coat of cement primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Taking down unserviceable sub main wiring any type and core and size complete and making good disturbed surface complete all as specified and directed.

M&L for Sub Main wiring complete multistrand copper conductor cable(FRLS) 2 runs of 6 Sq mm for phase and neutral and 1 run of 6 Sqmm for earth wire drawn through and including concealed PVC conduit in wall not less than 25 mm dia with all fittings like tees, bends, junction/ terminal boxes etc. as per site requirement complete all as specified and directed Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length.

Disconnecting and taking down DBs, light fittings including accessories etc. and making good to the disturbed surfaces to match the existing, all as specified and as directed .

Taking down carefully aluminium point wiring (light, fan, socket or power) including switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floors, etc. Note:- Temporary arrangement for power supply shall be provided by contractor.

M & L for concealed point wiring complete with 1.5 sq mm as per IS specification FRLS PVC insulated unsheathed stranded copper conductor cable drawn through and including suitable size of PVC conduit including PVC flexible pipe and all accessories complete including steel terminals boxes suitable for switches, sockets, fan regulator etc. with screw, cup washer and 1.5 sq mm copper earth continuity wire connected to ceiling rose to fitting and earth dolly for the following complete all as specified and directed. Note-The rate is inclusive cutting/ chasing and making good disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with ODB/colour wash/ white wash complete all as specified and directed

One light/ceiling fan/ exhaust fan/ wall mounted fan point controlled by one switch.

One switch socket outlet type 5 pin 6 amp on same board.

One switch socket outlet type 5 pin 6 amp on independent board

All as per item No 71.00 here-in-before but 2.5 sq mm cable and 2.5 sq mm copper earth dolly for the following complete all as specified and directed.

One switch socket outlet type 5 pin 16 amp on independent board.

One sheet metal enclosure point for geyser on independent board.

Supply and fixing in replacement surface mounting tube light fitting, 1X20 watt, 230 volts 4 ft LED CRCA batten including retrofit T8 glass (LED tube rod) with and including, internally pre wired with all accessories and including connecting up to fitting, all as specified and directed. Make- C&S Cat Part No TARA-Mi/20 or equivalent in Havells / Philips / Benlo

Supply and fixing in replacement surface mounting tube light fitting, 1X10 watt, 230 volts 2 ft LED CRCA batten including retrofit T8 glass (LED tube rod) with and including, internally pre wired with all accessories and including connecting up to fitting, all as specified and directed . Make- C&S Cat Part No TARA-M/10 or equivalent in Havells/Philips/Benlo

S&F in replacement of building security light fitting 30 W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light suitable for and including pole dia 40 mm of bracket duly fixed with clamps, nut, bolts & washers etc. complete all as specified and directed. Make: C&S Model : C&S INDUS E/30 W or equivalent in Bajaj/CG/Polycab/ Havells as approved.

S&F ceiling fan complete with all accessories 230 volts, 1400 mm sweep, connecting up with replacement of cable T/C flexible cable of size 0.50 Sqmm from ceiling rose / connection including taking down of old ceiling fan and depositing to MES store yard all as specified and directed.

Taking down of unsv ceiling fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing complete all as specified and directed . Note:- Rewinding will be measured and paid under respective item of this Schedule.

M&L for rewinding of ceiling fan 1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying varnish & after drying of varnish assembling of fan including replacement gun metal bush and Shaft where ever required complete all as specified and directed . Note:- Gun metal bush and Shaft will be measured and paid under respective item of this Schedule.

Supply only Gun metal bush for ceiling fan 1400 mm sweep complete all as specified and directed .

Supply only shaft for ceiling fan 1400 mm sweep complete all as specified and directed .

M&L for painting of ceiling fans complete, in situ with one coat of synthetic enamel paint by spraying as approved by Engr-in-Charge after cleaning all dust etc. complete all as specified and directed .

S & F 0-4 step type electronic regulators for ceiling fan 1200 mm sweep, 240 volts, all as specified and as directed .

S&F exhaust fans(Metal), AC single phase 230 volts/240 volts of size 450 mm sweep with louver and connecting up with replacement of cable T/C flexible cable of size:- 0.50 Sqmm from ceiling rose / connection and including taking down of old exhaust fan and depositing to MES store yard, complete all as specified and directed.

S & F ceiling rose, two to three terminals complete all as specified and directed.

S & F switch piano flush type single pole one way 5 amp complete all as specified and directed.

S & F socket 2 in 1, 3 pin, 5 amps complete all as specified and directed.

S & F switch piano flush type single pole one way 15 amp complete all as specified and directed.

S & F socket 2 in 1, 3 pin 5 & 15 amps flush type complete all as specified and directed.

S & F concealed sheet metal enclosures with socket plug top and 20 amps MCBs for geyser complete all as specified and directed.

S & F VTPN DB 4 way double door type for fixing MCCB upto 100 amps as incomer and MCB as out going with metal door and IP 43 protections & connecting complete all as specified. Make Legrand/ABB/C&S Electric/Havells.

S & F VTPN DB 6 way double door type for fixing MCCB upto 100 amps as incomer and MCB as out going with metal door and IP 43 protections & connecting complete all as specified and directed. Make Legrand/ABB/C&S Electric/Havells.

S & F SPN DB 8 way double door type with metal door and IP 43 protections flush mounting for MCBs & connecting complete all as specified and directed. . Make- Legrand/ABB/C&S Electric/Havells.

S & F SPN DB 12 way double door type with metal door and IP 43 protections flush mounting for MCBs & connecting complete all as specified and directed. Make- Legrand/ABB/C&S Electric/Havells.

Supply and fixing MCB DP 63 amps 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and directed.

Supply and fixing MCB SP 5 to 32 amps 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and directed.

Supply and fixing MCCB 100 Amps 3 pole 415 volts fixed type with breaking capacity 36 KA 415 volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and directed.

S&F water heater storage type of 5 star BEE rating , electric driven, capacity 50 litres, Inner container of Copper material, including taking down of old geyser and depositing to MES store yard and connecting up the geyser with replacement of cable three core cable of size 2.50 Sqmm by means of plug top 16 Amps complete all as specified and directed. Make-Havells Product No. GHWAMESWH050 or equivalent CROMPTON GREAVES/ BAJAJ/ RECOLD/ MORPHY RICHARDS/ VENUS/ USHA LEXUS

Taking down geyser 50 ltrs capacity of any make, opening up complete for inspection descaling by chemical treatment of internal tank , thermostat pipe, base plate assembly carrying out minor repairs including replacement of gaskets testing and refixing in position including making electrical and water connection complete all as specified and directed .

M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earthing lead 4 mm dia galvanized iron or steel by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No. 3 connected to earthing test point and testing on completion and including test point termination, all as specified and directed . Note:-The cost of excavation and earth work, PCC pit and CI cover, funnel & watering pipe, wire mesh, charcoal dust and common salt and 15 mm dia medium grade GI pipe as protection to earth lead wire shall be deemed included in the unit rate for earthing.

S & F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situations for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.

MOHIT ENTERPRISES

Chaudhary Constructions

PARGATI TOWER CORPORATION