CERTAIN REPAIR AND CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANKS AND SOAKAGE WELL AT MADHOPUR MIL STN UNDER GE BASOLI

Amount

M&L for cleaning of SGSW /RCC/PVC sewage line of 150mm/200mm/250mm dia by rodding/auger rods & drain pipe machine as required for one manhole to another manhole including gully traps and getting out the sludge from any size of manholes and gully traps, before & after cleaning process of SGSW /RCC/PVC sewage line and well flushing using clean water through water bowser of pipe of any capacity (arranged by the contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning filling with excavated materials up to ground level including removal of surplus soil to a distance n.exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed by Engr-in-Charge.

M&L for cleaning/taking off of sludge (solid/semi solid) of any state from manhole of any size including gully trap having depth upto 3.00m by using machinery or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size in low laying area from habbatient area and returning filling with excavated materials up to ground level including removal of surplus soil to a distance n.exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed by Engr-in-Charge.

M&L for opening/cleaning of blocked WC,sink,WHB of any type, traps and CI/PVC drain pipe including fitting (i.e. access door bends/tee etc.) of any size at any floor & position with and including taking down of CI/CP/PVC grating and refixing the same at position with appropriate materials/fitting i.e. white cement, solvent, nuts & bolts etc. and well flushing, pressure pumping, taking out all residue materials etc.and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and covering same with the earth level including removal of surplus soil to a distance 250m complete all as specified and directed by Engr-in-Charge. Note for item no. 1 to 3:- (i) The contractor/site superivisor will attend the complaint cell of AGE B/R-I , MADHOPUR DET to receive the complaint slips daily at 09:00 hrs to carry out the complaints within 48 hrs from reciept of complaint slip and completion report will be submitted to concerned JE/AGE.n case of non attending complaints in same day, recovery @ Rs.250.00 per complaints will be recovered from contractor complete all as specified and as directed by Engr-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. Complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition). Complete all as specified.

Excavation in trenches not exceeding 1.5m depth and not exceeding 1.5m in width in any type of soil and getting out.

Returning filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cum all as specified.

Removal of surplus soil not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia of pipe complete all as specified and directed.

M&L for RCC pipe Class NP-3, 150mm bore laid and jointed on concrete bed, complete including testing etc all as specified and shown on drgs including Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;complete all as specified and directed.

M&L for RCC pipe Class NP-3, 200 mm bore laid and jointed on concrete bed, complete including testing etc all as specified and shown on drgs including Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;complete all as specified and directed.

M&L Cement concrete M-10 (Nominal mix),type-2, 1:3:6, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete complete all as specified

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole and external pointed flush in same mortar as the work proceeds. Complete all as specified.

M & L Brick work "Except bricks" with curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole and external pointed flush in same mortar as the work proceeds. Complete all as specified.

M&L for providing cement conrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, arapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or hamfered angles and throating, as directed

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid ater proofing compound @ 0.40% of cement weight all as specified.

M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L Precast cement concrete type B-1, 1:2:4 (20mm graded) aggregate as in manhole cover including necessary form work as required Complete all as specified and as directed by Engineer-in-Charge.

M & L Reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in slabs including necessary form work as required complete all as specified and directed

Removing the manhole cover (CI or RCC) , any type of manhole rectangular/circular and de-sludging/de-watering of septic tanks and soakage wells of any size and depth by means of hydraulic jet pressure machine by plugging inlets as required, making it fully functional to the entire satisfaction of Engineer in charge including carrying the effluene toutside the defence land in closed containers adn re-instating the manhole cover to its original position complete all as specified and directed by Engineer-in-charge. (the quoted rates includes for keeping the particular septic tank and soakage well undertaken once for de sludging/de-watering functional for full contract period).

M&L for Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade including 50 mm thick sand cushioning and 100mm thick cement concrete type C-2, 1:3:6 (40 mm graded crushed stone aggregate), including demolition of PCC (unrienforced) as in base of floor complete all as specified.

S&F in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. complete incl making good to floor all as specified.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern), white, incl connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe,etc comlete all as specified.

S&F in repaire plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified.

S&F in repairs for 110/110 mm bore PVC (SWR) 'P' trap including jointing with solvent cement.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls.

S & F PVC SWR Bends in any radius 110 mm bore with access door in repair.

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair.

S&F in repairs for 110mm dia bore PVC SWR branch piece single (single Y) equal or unequal .

S&F in repairs for 75mm dia bore PVC SWR branch piece single (single Y) equal or unequal

S&F PVC (SWR) Vent cowl 110 mm bore in repair.

S&F PVC (SWR) Vent cowl 75 mm bore in repair.

S&F in repairs for 125/110mm bore PVC (SWR) gully trap including jointing with solvent cement.

Disconnecting existing tanks,setting side for repairing,cleaning and removing all scale dirt,etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipes etc of capacity upto and including 500 ltrs abd endrosed the word '' CLEANED ON WITH DATE''with white paint including replacement of broken/unservicable fittings such as Elbow.tee,socket,nipples of any size etc complete all as specified.

Disconnecting existing tanks,setting side for repairing,cleaning and removing all scale dirt,etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipes etc of capacity Exc 500 Ltrs and upto and including 1000ltrs abd endrosed the word '' CLEANED ON WITH DATE''with white paint including replacement of broken/unservicable fittings such as Elbow.tee,socket,nipples of any size etc complete all as specified.

Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of UPVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and as directed by Engineer-in-Charge. Make : JAIN IRRIGATION/ AJAY FLOW GUARD/ASTRA/ASHIRBAD/SUPREAM.

S & F Factory made RCC manhole cover with MS Flat/sheet of size 600 mm X 900mm X 75 mm with two cups handle for lifting conforming to IS-12592 of any size complete all as specified and directed by Engineer-in-Charge

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair cast iron cowl for 50 mm dia all as directed by Engr-in-charge.

S & F CI Lid/Cover Suitable for CI Oval Acess door bend of Size 100/75 mm

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement as in MANHOLES including Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for water proofing treatment in sunken portion and applying water proofing treatment on horizontal or vertical surfaces by applying bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membarane weighing not less than 3.6 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membarane over sunken portion after cleaning the surfaces by removing dust, dirt etc., as per manufacturers instructions including 15mm thick plaster in CM 1:4 and all as specified and as directed.

M&L PCC 1:5:10, Type E2 (using 40 mm graded brick bats) in filling of sunken portion

M&L PCC type B-0, 1:2:4 using 12.5mm graded stone aggregates 25mm thick as subbase

M&L cement concrete type B-1 1:2:4 (using 20mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges

S&F for 50mm dia GI Medium grade Pipe in sunken portion with all fitting and fixed complete as spouts including cutting hole and making good the same as directed.

M/S RAJINDER SINGH

BALKRISHAN GUPTA AND SONS

R K Builders