Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC 36 151 E 73 PERIYAR NAGAR THANGAMAPURIPATTINAM METTUR DAM 02 | L1 | Accepted-AOC L1 | |
| 2 | L2₹7.0 L+₹3,700 (0.53%)Rejected-Finance 19 M G WORKS S BLOCK NEAR PONDY ENGINEERS PONDICHERRY | PONDICHERRY | PUDUCHERRY | 605001 | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | SRI VAITHEESWARA CONSTRUCTIONS L1 | JS ENGINEERING WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Inspection and cleaning of Turbine Lube Oil Cooler B:
Dismantling of Top water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes if any, cleaning of top and bottom water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges. | 1 | No. | 46,400 ₹46,400 Lowest | 46,500 ₹46,500 |
| 2.00 | Inspection, cleaning and replacement of upper & lower shell gasket in Turbine Lube Oil Cooler A:
a) Dismantling of Top water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes if any, cleaning of top and bottom water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges. | 1 | No. | 46,400 ₹46,400 Lowest | 46,500 ₹46,500 |
| 3.00 | b) Dismantling of Bottom water box by loosening of bolts & nuts and bring down from 8.5 meter to '0' meter by using the chain block & special tackles, replacemet of damaged water gaskets and rubber chord with suitable size and cleaning flange seating area including the cost of consumables and T&P charges. | 1 | No. | 54,500 ₹54,500 Lowest | 54,800 ₹54,800 |
| 4.00 | c) Lifting of MOT Cooler Tube nest 'A' from shell , Removing and cleaning of oil sludges deposit on the tube nest without any oil traces by water & air , providing new oil gasket and positioning of MOT Tube nest 'A' in the upper shell including dismantling and assembling of air ventilation duct in 8.5 mtr as per engineer in charge with the cost of consumables and T&P charges. | 1 | No. | 1,05,500 ₹1,05,500 Lowest | 1,06,000 ₹1,06,000 |
| 5.00 | Inspection and cleaning of TDBFP A&B, MDBFP Lube Oil Coolers:
Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges. | 6 | Nos. | 30,900 ₹1,85,400 Lowest | 31,100 ₹1,86,600 |
| 6.00 | Inspection and cleaning of MDBFP Working Oil Coolers B:
Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil, water gaskets and rubber chords, assembling and tightening of all parts and painting 2 coats of Smoke grey enamel paint including the cost of consumables and T&P charges. | 1 | No. | 36,200 ₹36,200 Lowest | 36,400 ₹36,400 |
| 7.00 | Inspection ,cleaning & flaring of Tube ends of MDBFP Working Oil Cooler A:
a) Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil, water gaskets and rubber chords, assembling and tightening of all parts and painting 2 coats of Smoke grey enamel paint including the cost of consumables and T&P charges. | 1 | No. | 36,200 ₹36,200 Lowest | 36,400 ₹36,400 |
| 8.00 | b) Flaring the SS tube ends of the leakage tubes by using special tools,welding, Grinding, and other connected works including cost of consumables and T&P charges. | 1 | No | 1,44,500 ₹1,44,500 Lowest | 1,45,000 ₹1,45,000 |
| 9.00 | Inspection and cleaning of Vacuum Pump Heat exchangers:
Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges. | 2 | No. | 14,800 ₹29,600 Lowest | 15,000 ₹30,000 |
| 10.00 | Inspection and cleaning and hydraulic testing of E.H Oil Coolers:
Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges. | 2 | Nos. | 4,500 ₹9,000 Lowest | 4,600 ₹9,200 |
Tender Value
Refer Docs
EMD Value
₹6,600
Closing Date
31 Jul 2025, 2:00 pmClosed
CE / MTPS - II
O/ o CE / MTPS - II
ESCircleTGMCA Division Inspectioncleaning and hydraulic testing of Turbine lube oil coolerBTDBFP AB Lube oil Coolers MDBFP Lube oil Working oil cooler ABVacuum Pump Heat exchangers EH oil coolers and replacement
2025_EB_582859_1
OT 20/25-26
Open Tender
Maintenance Works
Works
30 days
SEESMTPSII
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹6,600
Yes
12 Nov 2025
17 Jul 2025
1 Aug 2025
17 Jul 2025
31 Jul 2025
17 Jul 2025
Amount
Inspection and cleaning of Turbine Lube Oil Cooler B: Dismantling of Top water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes if any, cleaning of top and bottom water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
Inspection, cleaning and replacement of upper & lower shell gasket in Turbine Lube Oil Cooler A: a) Dismantling of Top water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes if any, cleaning of top and bottom water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
b) Dismantling of Bottom water box by loosening of bolts & nuts and bring down from 8.5 meter to '0' meter by using the chain block & special tackles, replacemet of damaged water gaskets and rubber chord with suitable size and cleaning flange seating area including the cost of consumables and T&P charges.
c) Lifting of MOT Cooler Tube nest 'A' from shell , Removing and cleaning of oil sludges deposit on the tube nest without any oil traces by water & air , providing new oil gasket and positioning of MOT Tube nest 'A' in the upper shell including dismantling and assembling of air ventilation duct in 8.5 mtr as per engineer in charge with the cost of consumables and T&P charges.
Inspection and cleaning of TDBFP A&B, MDBFP Lube Oil Coolers: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
Inspection and cleaning of MDBFP Working Oil Coolers B: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil, water gaskets and rubber chords, assembling and tightening of all parts and painting 2 coats of Smoke grey enamel paint including the cost of consumables and T&P charges.
Inspection ,cleaning & flaring of Tube ends of MDBFP Working Oil Cooler A: a) Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil, water gaskets and rubber chords, assembling and tightening of all parts and painting 2 coats of Smoke grey enamel paint including the cost of consumables and T&P charges.
b) Flaring the SS tube ends of the leakage tubes by using special tools,welding, Grinding, and other connected works including cost of consumables and T&P charges.
Inspection and cleaning of Vacuum Pump Heat exchangers: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
Inspection and cleaning and hydraulic testing of E.H Oil Coolers: Dismantling of Front water box, cleaning of all tubes with nylon brush, hydraulic testing of tube nest, plugging of punctured tubes, cleaning of front and rear water box, cleaning of all flange seating areas, providing new oil and water gaskets, assembling and tightening of all parts including the cost of consumables and T&P charges.
JS ENGINEERING WORKS (BID ID -1414166)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .