Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC REGD OFFICE VILLAGE KHEJURI TEHSIL SIKANDARPUR DISTT BALLIA UTTAR PRADESH | BALLIA | UTTAR PRADESH | 277303 | L1 | Accepted-AOC ok | |
| 2 | L2₹40.8 L+₹4.8 L (13.4%)Rejected-Finance VILL PO MANOHAR CHHAPRA MOTIPUR DISTT MUZAFFARPUR PIN 843111 | MOTIPUR | MUZAFFARPUR | BIHAR | 843111 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹41.8 L+₹5.8 L (16.2%)Rejected-Finance B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹49.4 L+₹13.5 L (37.4%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
12 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BIHTA
AIR FORCE STATION BIHTA - 801103
ADDN/ALTN TO BLDG NO P-72 AT AF STN DARBHANGA UNDER GE (AF) BIHTA
2023_MES_603868_1
8326/BHT/DBG/E8
Open Tender
Civil Works
Item Rate
180 days
Darbhanga
CLASS D CATEGORY a(i)
7 documents required · 7 mandatory
₹500
GE (AF) Bihta
₹87,300
Yes
9 Aug 2023
16 Jun 2023
20 Jul 2023
16 Jun 2023
12 Jul 2023
30 Jun 2023
17 Jun 2023 - 23 Jun 2023
Amount
M&L brick work with pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick walls or concrete surfaces in CM 1:4, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for 15 mm thick rendering on other than fair faces of brick walls or stone masonry surfaces in CM 1:6, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and directed.
~Ditto~ but 5 to 10 mm dia mild steel TMT bars as in stirrups, spacers and binders etc complete all as specified and directed.
M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressumers, lintels etc, complete all as specified and directed.
Formwork (for rough finished surfaces) to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed.
M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
Cutting holes into or through brick walls exceeding half brick but not exceeding one brick thick, built in cement mortor and making good in cement mortor (1:3) or cement concrete (1:2:4) type B1 as required, complete all as specified and directed.
S&F for mild steel work as in bands, straps, hold fasts etc and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Providing cement concrete type BO 1:2:4 (12.5mm graded aggregate) in cills, steps, seismic and other similar bands plinth coureses string courses lacing courses parapets and railing copings kneelers apex bed plates kerbs etc. water troughs and the like including wethering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Forming dovetailed cavities, n exc 10cm x10cm at top and 20cm x 20cm at bottom in concrete cast-in-situ (plain or reinforced) for holding down bolts, etc. for machinery, stanchions, etc. including temporary forms or moulds and carefully grouting round bolts (after fixing) with cement concrete type B1, 1:2:4 (20mm graded aggregate) or cement mortar 1:3, complete all as specified and as directed
Formwork (rough finished surfaces) to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exc 200 mm thick complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, floor and roofs n exc 20cm thick and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as directed by EIC.
S&F hard drawn steel wire fabric cut to lengths bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight per square metre Exc 4 kg, complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including pintle hinges, stops, hand-made sliding bolts, etc.either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete FE 410W (Gde E-250) quality A, complete all as specified and directed.
S&F 1.60 mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and directed.
M&L Mild Steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410-W (Gde - E-250) quality-A, complete all as specified and directed.
S&F rolled mild steel as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe 410-W (Gde-E- 250) quality - A, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.
M&L for machine cut kota stone slab as in flooring 17 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, complete all as specified and directed.
M&L for machine cut kota stone slab as in skirting, dado, risers etc, 17 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) any thickness, incluing cover fillets, complete all as specified and directed.
S&F Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605 mm, including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.
S&F Gypsum ceiling board 60x60cm x12mm thick (pre-finished) in ceiling fixed as per manufacturer's instructions or as specified and directed by Engr-in-Charge.
M&L for preparing new steel surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.
Taking down chowkats with shutter (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sm each, complete all as specified and directed.
Taking down chowkats with shutter (without taking off shutters from the frames) not exc 1.5 sqm each, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying 2 coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed.
M&L for complete removal of existing treatment from surfaces of walls and applying 2 coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed.
M&L for complete removal of existing treatment on wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc incl applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed.
M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed.
M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.
S&F 100 mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws, complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
M & L for preparation of new or previously untreated wood or wood based surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Surface dressing n exc 15 cm deep and getting out in Soft/ loose soil, complete all as specified and directed.
M & L for hard core (broken bricks) of gauze n exc 63mm deposited, spread in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.
M&L for brick work with pulverised fuel Ash-lime bricks (Fly ash bricks - non modular size), straight or curved on plan to any radius in half brick walls built in cement mortar 1:4, complete all as specified and directed.
M & L for 100mm PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in as in sub floors, sub bases, floors and pavings etc, complete all as specified and directed.
M&L Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey pigment cement and pigment, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finish, complete all as specified and directed.
M&L for joint free Non-Skid ceramic coloured tiles (Premium quality) 7 to 8 mm thick area of each tiles exc 0.06sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for light coloured vitrified tiles, 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for 10 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 as backing under tiles/kota stone, complete all as specified and directed.
M&L Glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.
S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand including 32 mm waste coupling and Waste fittings of brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
S&F 15mm Pillar taps, cast copper alloy, with long heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm dia GI pipe or for brass ferrule or to GI socket, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL), complete all as specified and directed.
M&L PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, 75 mm thick as in plinth protection/path/pavings etc, finished even and smooth without using extra cement complete all as specified and directed.
S&F PVC connection, 15 mm size with two PTMT nuts, length of connection 450 mm, complete all as specified and directed.
S&F in repair Angle valve, fancy type with long shank and capstan head, chromium plated brass, screwed both ends to iron pipe or union of dia 15 mm, complete all as specified and directed.
Taking up or down steel tubing 15 mm dia and connections including cleaning for refixing or removal to store, complete all as specified and directed.
S&F 15 mm dia GI tubing, medium grade, with all fittings and fixed complete to walls, ceilings and floors, complete all as specified and directed.
S&F 'D' type towel rail 60 cm long, stainless steel, fancy type, 20 mm dia, fixed with stainless steel screws, complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC low level flushing cistern, top push type with inlet ball valve, PVC float, brackets including superior quality PVC flush pipe of 32 mm dia, complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect and as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators, partations with one or more rebates including joining cleat for fixing etc, Complete all as specified and directed by Engr-in-Charge.
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.
Supply only sheet glass 4 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
Returning filling in soil including spreading, levelling, waterning and well ramming in layers not exceeding 25cm thick , complete all as specified and directed.
Removing excavated materials (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above starting point, complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc. 50m and making good in soft/loose soil, complete all as specified and directed by Egr-in-Charge.
M&L for PCC (1:3:6) type C2 using (40 mm graded aggregate in foundation, filling and mass concrete etc, complete all as specified and directed.
M&L framed brackets of angles, tee for posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets including all necessary drilling or riveting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for galvanised, 2 strand steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rail, straining bolts, incl securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins etc, complete all as specified and directed. (each line wire to be measured).
M&L for RCC Nominal Mix 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L for RCC Nominal Mix 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed.
Formwork (rough finished surfaces) to sides of concrete foundations, column footings, bases of columns, raft and raft beams, sides and soffits of plinth beams or other similar works, vertical or to batter for rough finished surfaces, complete all as specified and directed.
Formwork (fair finished surfaces) to sides of columns, pillars, piers, posts, struts and stanchions etc complete all as specified and directed.
Prepration of newly plastered external surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
Material and labour for point wiring for one light point/fan point/bell point with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic steel conduit of 20 mm dia or higher, ISI marked, medium grade complete with and including all steel conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed.
Supply & fixing Switch Piano, flush button, single pole one way, 5 Amp, 230 Volts, complete all as specified and directed.
Supply & fixing bell push, 5 amps, single pole, one way, 230 volts, complete all as specified and directed.
Supply & fixing Ceiling rose surface bakellite two to three terminals, complete all as specified and directed.
S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used, single pole and neutral, 4 ways, 220 volts with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, complete all as specified and as directed.
Supply & fixing MCB SPN 63 Amp ISI marked convinient to 'C' Curve breaking capacity 10 KA, complete all as specified and directed.
Supply & fixing MCB Single pole 240 Volts 6-32 Amp ISI marked convienent to 'C' Curve breaking capacity 10KA, complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 25x4mm, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 32 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by Engineer-in-Charge. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’.
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed.
S&F LED street light fitting 70 watt 230 volt AC, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket ,including GI pipe of 20 mm light grade,with impact and corrosion resistant including thermal management in multiple optics complete IP 66 protection complete including taking down old/unserviceable light fittings, complete all as specified and directed.
S&F LED flood light fitting 120 watt 230 volt AC, outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete including taking down old/unserviceable light fittings, complete all as specified and directed.
S&F emergency/fire alarm for duty armourer with audio range 500 mtr complete, single phase 220 volts, 50 HZ AC, mounted on wall , all as required at site, complete all as specified and directed.
S&F air termination, single pointed copper rod 12 mm dia and 300 mm long, discharge capacity 65 KA, including insulators, stay, PCC all necessary earth works etc as required at site, complete all as specified and directed by Engr-in-Charge.
Material and labour for brazing of earth continuity conductor or main earthing lead 25mm X 3mm, aluminum strip/earth lead, in any position including jointing by existing tinned copper/brass nuts, bolts and washers, complete all as specified & directed. Note: - (i) Each joint shall be considered for measurement purpose. (ii) Existing nut bolts & washers shall be reused for jointing of strips. (iii) Brazing shall be done with gas welding using brass electrode.
M/S ANAND MOHAN ENTERPRISES
PAPPU ROY CONSTRUCTION
Bikarma Enterprise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .