84749PROVISION OF LED STREET LIGHT AND SPECIAL REPAIR TO LED SECURITY LIGHT, OVER HEAD LINE BY PUTTING IT UNDER GROUND FOR SUPPLY OF ELECTRICITY AND WATER SUPPLY DISTRIBUTION PIPE LINE AT KOLHAPUR AREA UNDER GE (NORTH ) PUNE.

Amount

Excavation in trenches, not exc 1.5 m wide and not exc 1.50 m in depth for foundation including taking out or laying cable, pipe etc or for shafts, wells, cess pits, manholes, pier holes , pole / stays etc not exc 10 Sqm on plain and getting out in hard dense / soil complete all as specified and as directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.50 m in depth for foundation, laying of UG cable, pole, stays etc including taking out or laying cable, pipe etc or for shafts, wells, cess pits, manholes, pier holes , pole / stays etc not exc 10 sqm on plain and getting out in soft loose / soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft / loose soil, including providing heaps along the trenches with surplus soil ,complete all as specified and as directed.

Removing excavated materials (soils) not exc. 50 m and depositing where directed at a level not exc.1.5 m above the starting point in soil, complete all as specified and as directed.

Taking up or down galvanised steel tubing and connections, including cleaning for refixing or removal to store including connections and fittings from trenches, walls, floors, etc complete all as specified and directed of the followings.

15 mm bore.

20 mm bore.

25 or 32 mm bore.

40 or 50 mm bore.

Supply & laying GI tubing of size 15 mm bore 'medium grade' ISI marked with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and as directed.

Supply & laying GI tubing of size 20 mm bore 'medium grade' ISI marked with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and as directed.

Supply & laying GI tubing of size 25 mm bore 'medium grade' ISI marked with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in trenches, complete all as specified and as directed.

Fixing only tubes any grade 20 mm bore with renewal of all fittings, to walls ceilings or laying in floors serviceable materials obtained from Item No-5 here-in before and making good the disturbed surfaces in cement mortar 1:3 complete all as specified and as directed.

S&F gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fied fo the size of 20 mm bore with ISI marked and as per IS 14846 complete all as specified and as directed.

S&F gun metal, globe or gate valve,of size 25 mm bore heavy duty, with iron wheel head, ISI marked screwed both ends for iron pipes complete all as specified and as directed.

Supply, laying and fix unplasticised PVC pipes of bore 40 mm pressure rating 10 kgf / cm2 laid in trenches including testing of joints complete all as specified and as directed. Note - Excavation shall be measured and paid separately.

Supply, laying and fix unplasticised PVC pipes of bore 50 mm pressure rating 10 kgf / cm2 laid in trenches including testing of joints complete all as specified and as directed. Note - Excavation shall be measured and paid separately.

S&F PP-R Gate valve (brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( polypropyelene random copolymer) gate valve brass 63 mm outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.

S&F PP-R Gate valve (brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( polypropyelene random copolymer) gate valve brass 50 mm outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.

Dismantling water tanks and removing to store of capacity exc 250 & n exc 500 litrs complete all as specified and as directed.

S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered 'ISI' marked, hoisted & fixed in position including 20 / 25 mm dia ball brass valve with polythene flaot and flynut, with existing inlet, outlets & provision of washouts, vent pipe, nipples of suitable size complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc in existing position capacity exc 500 and not exc 1000 ltrs without damaging tank complete all as specified and as directed.

All as per item No 18 here-in-before but tank size exc 250 and not exc 500 ltrs complete all as specified and as directed.

S&F 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed of size 20mm. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 gms / 25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed.

Supply and lay High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches In protection of cable at road crosssing / hard rock/ standing as per site requirement etc complete all as specified and as directed.

Supply & lay GI tubing light grade in protection of cable at road crossing / hard standing as per site requirement etc all as specified and directed of the following bore.

20 mm dia.

25 mm dia.

M&L for plain cement concrete 1:4:8 (40 mm graded stone aggregate) as in lean concrete in foundation of poles etc, including formwork (as if required), complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 (20 mm graded stone aggregate) as in coping of pole etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified and as directed.

S&F steel tubular swaged pole type 410-SP-31 (9.0 Metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, nuts, screws including applying two coats of black bituminous paint internally and externally from bottom end of pole upto PCC coping and applying with two coats of aluminium painting over a coat of aluminium primer (externally from top of coping) and bottom of pole to be painted with synthetic enamel paint of alternate yellow & black strips (4 Nos each Strip 150 mm wide) including writing MES pole No. with synthetic enamel paint (first grade / quality), complete all as specified and as directed. Note:- Earthwork, plain cement concrete, etc. will be measured and paid under approprite Items.

M&L for danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps bolt and nuts of approved size, for LT 20 x 15 cm size including dismantling unserviceable one, complete all as specified and as directed.

S&F integral LED aviation light comprising of aluminium housing with ploycarbonate enclosure for any height of OH tank complete all as specified and as directed.

S&F surface mounting digital time switch astro type, daily astronomical caculation of sunrise / sunset times based on the entered location or location condition of pune area, and connecting with contactor with necessary electrical connections in existing panel including taking down old unserviceable one complete all as specified and as directed.

S&F contactor suitable for street light time switch 4 pole, 63 Amps, 415 Volt, with necessary electrical connections in existing panel including taking down old unserviceable one complete all as specified and as directed.

Supply & Laying, testing & commissioning of LT UG cable XLPE sheathed PVC insulated,screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in trenches/ surface of wall / in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc including removal of existing unsv cable and making good damaged surfaces as required of following sizes complete all as specified :-

2 core x 10 Sqmm.

4 core x 10 Sqmm.

4 core x 16 Sqmm.

Supply, installing, testing and commissioning out door type control panel for security light made out of 3 mm thick CRCA sheet with top canopy with locking arrangements of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side , having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form all round the panel board complete with the following items housed in :-

MCCB 4 Pole 63 Amps, Rotary Handle, adjustable Thermal Magnetic relay with breaking capacity 25 KA at 415 volts Ics=100% Icu - 01 No (in coming)

MCB 4 Pole 63 Amps, Rotary Handle, adjustable Thermal Magnetic relay with breaking capacity 25 KA at 415 volts Ics=100% Icu - 02 Nos (out going)

Digital time switch Astro type, daily astronomical caculation of sunrise/ sunset times based on the entered location or location condition of Pune area (Make Legrand Cat Part No 412654) including power contractor of capacity 63 Amps (Make Legrand Cat Part No 412456) including necessary wiring complete - 01 No.

Copper wound with CTR 100/5 - 03 Nos.

Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

M&L for street light fitting bracket made out from GI pipe 50 mm bore (dia), medium grade 1.50 m long, bent to required shape and fixing to poles with and including suitable size mild steel clamp made out of flat iron of size 40 x 6 mm - 02 sets, nuts, bolts as required duly painted with two coats of aluminum paint over a coat of red oxide zinc chrome primer including taking down old unserviceable bracket, comlete all as specified and as directed. Note : Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemd to be included in the quoted Unit Rate.

S&F Junction box for street lights of size 250 x 300 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unsv all as specified and as directed.

S&F LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decorative opal acrylic diffuser with IP 65 protection complete with warranty option of 5 years from date of installation and all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and as directed.

S&F energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 m long bend to required shape with suitable MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts and including taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge.

S&F Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 60 watts with pre wired and necessary mounting arrangements and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to junction box including necessary GI pipe medium braket of required dia 1.5 m long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts and including taking down old unserviceable street light fitting form electric pole of any description complete all as directed by Engineer- in-charge.

S & F for Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 72 watts with pre wired and necessary mounting arrangementsnd provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to junction box including necessary GI pipe medium grade 4 braket of required dia 1.5 mtr long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts and including taking down old unserviceable street Light Fitting form Electric Pole of any description complete all as directed by Engineer- in-charge.

S&F Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 90 watts with pre wired and necessary mounting arrangements and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to junction box including necessary GI pipe medium grade braket of required dia 1.5 m long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts and including taking down old unserviceable street light fitting form electric pole of any description complete all as directed by Engineer- in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I. Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate.

Dismantling cross arms of mild steel channel or angle sections, etc, including mild steel bolts, nuts, washers, etc complete all as specified and as directed.

Dismantling insulators like pin type, shackle type from existing electric poles of any description and any size, seggregating seviceable insulators and keep in safe custody for re-use, complete all as specified and as directed.

Dismantling ACSR or AAC conductors from the disturbed span including line spacer, etc complete all as specified and as directed.

M&L for sand cushioning (dry) in trenches / ducts for protection of UG cables (below, above and around the UG cable laid in trenches) of 23 cm spread thickness (8 cm in depth belfore laying the cable and 15 cm in depth after laying the cable) and consolidated (punned) upto 18 cm thickness, complete all as specified and as directed. Note : for the purpose of payment, punned thickness of sand cushioning only shall be measured and paid.

S&F sub-class `B` Brick, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, laid in trenches / surface of wall / in GI Pipe along with pole for connection to OH lines including brass cable glands mild steel flat iron clamps etc and testing for following sizes, complete all as specified and as directed. Note : Earthworks, sand cushioning, bricks, GI Pipe etc. will be measured and paid under appropriate Items.

4 core x 16 Sqmm.

4 core x 35 Sqmm.

3.5 core x 70 Sqmm.

S&F galvanised iron pipe light grade as in protection of UG Cable laid in trenches including necessary MS clamp, nuts, bolts and painting of size 40 mm dia complete all as specified and as directed.

Supply install testing and commissioning outdoor type control panel for security light made out of 3 mm thick CRCA Sheet with top canopy with locking arrangements of suitable size , padestral mounted, CPRI approved factory made totally enclosed , dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 415 volts , 50 Hz 3 Phase 4 wire system and comprising with and including following accessories and mounted on PCC plat form all around the panel board complete with the following items housed in:-

200 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round ) insulators of suitable size and good insulation resistance.

MCCB 4 Pole 125 amps, rotary handle, adjustable thermal magnetic relay with breaking capacity 25 KA at 415 volts Ics=100% Icu - 01 No (Incoming).

MCCB 4 Pole 63 amps, rotary handle, adjustable thermal magnetic relaywith breaking capacity 25 KA at 415 volts Ics=100% Icu - 04 Nos (out going).

MCB TPN 40 Amps, breaking capacity 10 KA at 230 volts - 01 No (out going)

MCB SPN 32 Amps, breaking capacity 10 KA at 230 volts - 01 No (out going)

Indicator Lamps (LED type) & HRC bakelite fuse showing R,Y, B phase - 01 set

SHRIYA CONSTRUCTION