GE (AF)/SGR-33/2025-26 REPAIR / MAINTENANCE OF CABLING, JUNCTION BOX, STREET LIGHTS, PERIMETER LIGHTS, TIMER SWITCHES AT DOMESTIC AREA, DOODHGANGA, LALGAON AND TECHNICAL AREA UNDER GE (AF) SRINAGAR

Amount

Taking down street light fitting, flood light fittings 30 / 60 / 90 / 120 / 250 Watts, any type, any wattage from street tubular /PCC Poles / High mast poles dismantling and checking out serviceability of part / decarburising at the end of joint of PVC / XLPE cable and fixture's connector cable, circuit such as drivers, MCPCB etc., replacement of unserviceable parts with new parts including soldering with existing circuit board, reassembling and refixing in position including conneting & testing, complete all as specified and directed. (Note: all unserviceable accessories shall be replaced under respective items. Connected T&P / Manpower / safety tools i.e ladder, crane, Elcn, helper, gloves, safety belt, helmet etc will be provided by the contractor without any extra cost.)

S&F driver suitable for LED light fitting 15 to 30 Watt, complete all as specified and directed.

S&F driver suitable for LED light fitting 45 / 60 Watt, complete all as specified and directed.

S&F driver suitable for LED light fitting 90 / 120 Watt, complete all as specified and directed.

S&F in replacement of existing unserviceable street light fittings with LED street light fitting 45 Watts, IP-66, having pressure die cast alumnium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-66 for water protection, including surge protection device 5 KV including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm, complete all as specified and directed.

S&F in replacement of existing unserviceable street light fittings with LED street light fitting 70 Watts, IP-66, having pressure die cast aluminium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-67 for water protection, including surge protection device 5 KV including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm, complete all as specified and directed.

S&F in replacement of existing unserviceable street light fittings with LED street light fitting 90 Watts, IP-66, having pressure die cast aluminium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-67 for water protection, having surge protection device 10 KV, including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm, complete all as specified and directed.

S&F in replacement of existing unserviceable flood light fittings with LED flood light fitting 150 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm, complete all as specified and directed.

S&F in replacement of existing unserviceable flood light fittings with LED flood light fitting 100 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for taking out HT underground cable and laying of new underground cable in replacement and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm. thick in soft / loose soil, complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc., complete all as specified and directed.

M&L for laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks, complete all as specified and directed

S&F in replacement weather proof thermo (Polysterene) cable junction box, having protection class IP-66 and overall minimum size 155 x 210 x 92 mm having metric knockouts on the wall, dully fixed on the pole with aluminium strip 25 x 3 mm clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10 mm to 17 mm (complete with check nut) and including cable connector and 1 No. 6 Amps MCB SP, complete all as specified and directed.

S&F in replacement timer switch, 16 A, 240 Volts, single phase, complete all as specified and directed.

S&F in replacement PVC insulated and PVC round sheathed multicore bright annealed bare copper conductor cable of size 2.5 Sqmm 4 core, 1100 volts grade, including suitable size of copper lugs as per IS:694/1990, complete all as specified and directed .

S&F in repairs 50mm dia bore mild steel galvanized iron tubes, 'light grade' for housing / protection to the LT cables, complete all as specified and directed.

S&F in replacement street light bracket made out of 40mm bore dia GI Pipe, light grade, 1.2m long tilted to 30 degree angle on 1.2m length along with 02 Nos flat iron clamp of 40 x 4 mm size 750 mm long duly drilled made to shape the bracket complete with nut bolt and washers including applying 2 coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed. (Note: T&P and safety equipment shall be provided by the contractor.)

Disconnecting / unscrewing of all electrical connections of the unserviciable flood light fitting from a height upto 12m and Supply, fixing, commissioning & testing the high bay light of 120 Watt capacity suitable for 240 volts, 50 HZs single phase power supply, fabricated with die cast aluminium with high power LEDs as light source, IP 65 complete with all standered accessories, complete all as specified and directed.

Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, cross sectional area of cable 95 Sqmm 3.5 core, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitable the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc. including taking out unserviceable cable, complete all as speccified and directed.

All as per Ser item No 21.00 here in above but cross sectional area 50 Sqmm x 3.5 core.

All as per Ser item No 21.00 here in above but cross sectional area 25 Sqmm x 4 core.

All as per Ser item No 21.00 here in above but cross sectional area 16 Sqmm x 4 core.

All as per Ser item No 21.00 here in above but cross sectional area 10 Sqmm x 2 core.

M&L for repairing of broken coping of pole foundation by using PCC, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in pole base upto the height of 50cm from the ground level and 600mm dia including necessary form work and painting with oil bound distemper over a coat of primer and finishing the surfaces, complete all as specified and directed.

M&L for hiring of crane for carrout necessary repair and replacement of unserviceable parts of high mast security light in same location to reach upto the height of 20 m, complete all as specified and directed.

S&F in replacement street light timer switches, including testing and commissioning of NATURE switch for outdoor lighting automation using space grade sensors and an advances micro controller suitable for outdoor use having features automatic switching ON sunset, Automatic switching OFF at dawn, NO clock setting & time settings wide operating voltage range, high voltage trip and auto reset having specification 230 Volts, 50 Hz complete with all connected accessories of rating 12 KW 3 phase, current range 40 Amps, complete all as specified and directed.

Servicing of High mast of any height and description, opening the mechanical hoisting / lowering accessories, steel wire bobbin, replacing the unserviceable meshing gear, easing the steel rope movements, checking the locking mechanism, replacing of oil ,greasing complete and checking for smoothing operation of the mast, complete all as specified and directed. Note : The cost of spares parts required for servicing shall deemed to be included in the quoted rate.

Dismantling the AC motor of High mast and taking out to workshop for re-winding upto 3 HP motor, removing the burn tout windings, re-winding the same with super enamelled copper wire of existing gauge, varnishing and oven drying, assembling and testing in position, complete all as specified and directed. Note: Rate for transportation from site to workshop and refixing on existing position after repair shall deemed to be included in quoted rate.

Supply and erect of steel tubular swaged pole complete with cast iron base plate final taper plug, bolts, nuts & screws as specified type 410, SP-22 (8.5m long) including two coats of aluminium paint over one coat of red oxide primer including dismantling of old poles, complete all as specified and directed.

M&L for plain cement concrete, 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) for coping including formwork etc., complete all as specified and directed.

M&L for plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60 cm x 60cm x 6.0mm thick and buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to GI earth plate with GI strip of size 25X3 mm by means of bolts, nuts and washers of steel all as shown in electrical plate No.3 including PCC pit (1:3:6) type C-1 in cement concrete 40 mm thick precast RCC cover in (1:2:4) type B-1 reinforced with 8 mm dia MS round bar @ 75 c/c both ways with 01 No lifting handle of 12 mm dia MS plain bar, GI pipe 15 mm dia light grade for GI wire protection and GI tubing 20 mm for watering including GI funnel with wire mesh etc., complete all as specified and directed. Note: If desired resistance not found at site, earthing shall be redone without any extra cost.

M&L for disconnecting of burnt / damaged cables from panels / junction boxes etc. cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs / insulation tapes etc. and reconnecting using new nuts /bolts / washers / thimble / lugs etc. and restoring three phase and neutral connection in the junction box for 10 /16 /25 Sqmm 2 / 3.5 / 4 core size LT underground cable, complete all as specified and directed. Note : The cost of Earth work required for extending the incoming /outgoing cable in junction box / panel etc. shall deemed to be included in unit rates.

M&L for electric / gas welding in panel / pole/ any other work, complete all as specified and directed.

S&F in replacement integral post top made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection capacity 1 x 20 Watts, complete all as specified and directed.

S&F of pillar lights 20 watts LED of height 2100mm made out of 1.5m and base plate of 450X450mm thickness 3.0mm and logo of Indian air force or as directed, complete all as specified and directed.

S&F in replacement of MCB SP 6A-32A, 240V, 'B' curve, 10kA breaking capacity, complete all as specified and directed.

S&F in replacement of MCB TP 63A, 415V, 'B' curve, 10kA breaking capacity, complete all as specified and directed.

S&F in replacement of LT Cable path indicator shall be provided at distance of min 100m and at every joint,and turning of cable . The cable path indicator should be brown colur and fixed of min 45cm long made of 40x40x6 mm of MS angle iron frame, complete all as specified and as directed. Note : The rate for M&L for PCC block of size 150mm x 150mm x 150mm required for fixing shall deemed to be included in the quoted rate.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 1,37,125.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/s Nasir Rasool Dar (BID ID -3355420)

FG CONSTRUCTION (BID ID -3351114)

M/S NEW FAROOQ TRADERS (BID ID -3356705)

M/s Jaipal Associates (BID ID -3356676)

M/S ZAHOOR ENTERPRISES (BID ID -3356455)

M/S NAZIR CONSTRUCTION (BID ID -3364751)

M/s BUTT BROTHERS (BID ID -3357242)

M/S BASHIR AND SONS (BID ID -3354518)

M/s GHULAM NABI HAJAM (BID ID -3362531)