PRPD/MS/234/MW/K - 2911/2023

Amount

Inspection and Cleaning of RFT of 12.5 Cu.m capacity

Inspection and Cleaning of Main feed tank of 10 Cu.m capacity

Inspection and Cleaning of Hot well of 2 Cu.m capacity.

Assisting to operate the purification system for purifying the lube oil available at MLOT and transferring to storage tank, re transferring the oil to MLOT -8hour shifts

Surveillance and cleaning of main lube oil tank, FLP suction strainers

Fabrication and Butt/Flange Welding of CS Pipes of different sizes SCH 40 using GTAW method including of supply of consumables, DPT of root and final passes. (pipe to be laid alongside wall at ~4 mtr height from floor)( 10% Radiography quality welds) for PPTL and MDV loop

Servicing and functional testing of RVs in main lube oil, TA lube oil and Hydraulic oil system.

Fabrication of SS 316L shaft as per drawing including chemical, UT, grinding and supply to PRPD stores

Calibration of dynamometer

Transporting of 8 Ton mechanical equipment on road with transit insurance to the value of 1 crore (equipment cost ) from SBC Vishakhapatnam to Kalpakkam site.. This work involves safe loading and unloading in both the sites, material handling equipment will be provided by the department, transit insurance shall be taken with Central Government approved insurance company or government, Toll, interstate permits on road will be borne by the contactor and all other terms and conditions are applicable as per technical specification. All the security clearances for both sites to be taken care by contractor.

Unloading of MDV, installation on its base, connecting the oil and steam pipe flange joint, pump suction piping around 20 joints of 100 and 150 and 200 NB flanges.

Erection of CS Pipes of sizes 80 NB, inclusive of handling of pipes, mechanical cleaning with rotary brush / compressed air, edge preparation as per Technical Specification (pipe to be laid alongside wall at ~4 mtr height from floor)

Fabrication of CS Pipe Supports from Angles, beams, Channels etc. including anchor bolts (Supply of Raw Material in Contractors Scope) as per Technical Specification (pipe to be laid alongside wall at ~4 mtr height from floor)

Application of two coats of Epoxy and two coats of Finish Paint on exposed surfaces (All the consumables including paint, thinner, primer etc. are in the scope of contractor

Supply of 80 NB Such 40 , Carbon steel Seamless Pipes conforming to IS3589 inclusive of Testing (Chemical composition, Mechanical properties and UT) inclusive of all charges.

80NB Sch. 40 LR Elbow 90 Degree as per ANSI B 16.9 { Supply of CS Pipe Fittings conforming to ASTM A234 WPB inclusive of Testing (Chemical composition, Mechanical properties and 100% UT and DPT) and transportation charges}

Supply of reputed make Valves inclusive of Testing(100% Hydro-test) and transportation charges: 80NB size Gate Valve , WCB 216, (Flanged Ends) with 2 companion flanges as per Technical Specification (IS-14846)

Supply of reputed make Valves inclusive of Testing(100% Hydro-test) and transportation charges: 80NB size Globe Valve, WCB 216, (Flanged Ends) with rising stem with 2 companion flanges as per Technical Specification (IS-14846)

Supply & installation of 80 NB, # 150 Rating Flange, ASTM A105 SORF, inclusive of gasket, bolts, nuts and washers.

K&K ENGINEERING