SPECIAL REPAIRS TO LIQUOR STORE OF CSD DEPOT UNDER GE WEST AGRA

Amount

Taking down chowkats or frames with out taking off shutters from the frames n.exc 1.5 Sqm each complete all as specified & as directed.

Taking down chowkats or frames with out taking off shutters from the frames exc 1.5 Sqm but n.exc 4 sqm each complete all as specified & as directed.

S&F pressed steel door frame of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock & strike plate etc. complete all as specified & as directed.

M&L providing cement concrete (1:2:4), type B-1 (using 20mm graded aggregate) as in coping, beanching, hold fast, bed plates, water troughs and the like including weathering, slightly arounded or chamfered anagle and throating complete all as specified & as directed.

M&L for PCC 1:3:6, type C-1 (Using 20 mm graded stone aggregate) as in back filling of pressed steel door frames complete all as specified & as directed.

S&F 40mm thick 2nd class hard wood plain framed panelled shutter (any No.of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density, wood particle board with commercial face veneers, supplied and fixed to chowkat complete all as specified & as directed.

S&F cast iron or malleable cast iron handles, cast type, stove enamelled black 150mm complete all as specified & as directed.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 200mm long complete all as specified & as directed.

S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm complete all as specified & as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and guard bars and similar work conforming to Fe-290 Gde E-165 complete all as specified & as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handles and steel pegstay complete with glazing bars dovetailed or welded complete all as specified & as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified & as directed.

Dismantling of ceiling board (Fibre,pulp, insulation etc) or insulation board / slabs/any thickness including cover fillets including frames complete all as specified & as directed.

S&F 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x32mm main and 23mm x 25mm (intermediate) of 30 gauge suitable for false ceiling including GI strip of 20mm wide of 30 gauge for hanging arrangement etc all as specified and directed

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/ inserted to timber / GI / Aluminium frame work with screws complete all as specified & as directed.

Demolition of cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified & as directed.

M&L for reinforced cement concrete (Nominal Mix) type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels upto 1.5m span complete all as specified & as directed.

M&L for mild steel bars 10mm dia and over , cut to length, bent to shape required, including crancking, bending spirally hooping ends binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified & as directed.

All as per item No. (18) above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Demolition of brickwork masonry built in CM including all quions, Arches complete all as specified & as directed.

M&L brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified .

M&L brick work with subclass ‘B’ bricks (except bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified .

Taking down cement plaster in any cement mortar on stone wall including racking out joints hacking for key scrubbing down with water etc complete all as specified & as directed..

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified & as directed.

M&L for rendering 15 mm thick in CM 1:4 with water proofing compound as per manufacturer's instructions on surface other than fair face of brickwork or concrete surfaces complete all as specified & as directed.

Supply only Integral water proofing compound complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified & as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above the gd level complete all as specified & as directed.

M&L for plain cement concrte 1:4:8, type D-2 (Using 40 mm graded stone gregate) as in sub base of floor complete all as specified & as directed.

M & L for Machine cut & polished smooth surface of kota stone slab 20-25mm thick as in flooring, including 20 mm thick cement mortar screed bed 1:6 fix in position etc complete all as specified & as directed.

M & L for Machine cut & polished smooth surface of kota stone slab 18-20mm thick as in skerting, including 15 mm thick cement mortar screed bed 1:4 fix in position etc complete all as specified and directed by Engr-in-charge.

M & L for hardcore of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & as directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) , in plinth protection 50mm thick finished even and smooth without using extra cement including making joint 12 wide to the full depth of PCC at max 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified & as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & as directed.

Taking down roof trusses, coupled rafters or trussed beams clear span above 4 metres & upto 8 metres complete all as specified & as directed.

S&F roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde-E- 250) quality-A complete all as specified & as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality-A complete all as specified & as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, eachscrewed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 22.5cm and n exc 30cm and diameter of neck 16mm to 20mm complete all as specified & as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws in hangers all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified & as directed.

M&L for preparation of new or previously untreated wooden surfaces over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and . brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified & as directed.

Use & waste of form work to sides of and soffits of floor or roof beam etc rough finished surfaces complete all as specified & as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified & as directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde-E- 250) quality-A complete all as specified & as directed.

S & F 1.00mm thick mild steel, plain, black sheet covering to door shut ters cut to size edges beaded if directed, holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/ riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, light fitting etc removing materials to store for keeping in safe custody for taking credit or reuse serviceable fittings/fixtures and making good the disturbed surfaces of wall/floors complete all as specified & as directed.

M&L for Point wiring in concealed conduit with 1.5 Sqmm PVC insulated flame retardent, single core stranded copper conductor for one light/fan/bell point in and including PVC conduit 19/20 mm dia to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm PVC insulated "Flame Retardent Low Smoke"( FRLS)" single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete all as specified and directed. (Wiring shall be made as per colour code in IS for Phase, neutral and earth)

All as per above but for one socket outlet 5/6 Amps controlled by one switch on same board with other switches

All as per above item No-2 but with 2.5 sqmm main wire and 1.5 Sqmm earth wire for one socket out let 3/6 pin, 15/16 Amps controlled by 1 one way 15/16 amps switch on independent board complete all as specified & directed.

S&F switch piano flush type single pole, 5/6 Amps one way, 230 volts, complete all as specified & as directed.

S&F socket outlet 5/6 Amps flush type piano 5 pin 230 volts complete all as specified & as directed.

S&F switch piano flush type single pole , 15/16 Amps one way, 230 volts, complete all as specified & as directed.

S&F socket outlet 15/16 Amps multipurpose 3 pin 230 V complete all as specified & as directed.

S&F ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified & as directed.

Supply & fix in replacement, surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically altra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- PLUTONEO2X2PLR34WLED857S or equivalent model of make ,Philips/Bajaj/ Crompton Greaves as approved by GE.

Supply & fix in replacement, outdoor street light LED 30 watt luminaire ENDURA CITYLITE PLATNUM PLUS energy saving and environment friendly long life IP 65 powder coated with extruded grey aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- SL30WLED757SASYBOPC or equivalent MODEL OF pHILIPS/bAJAJ/CG as approved by GE.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces complete all as specified & as directed.

S&F MCB DB sheet metal enclosure Single pole and neutral 415 V with 200 Amps standard bus bar of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mounting type double door factory fabricate complete without MCB and with encosure blank plates for unused way suitable for 8 way double door complete all as specified & as directed.

S&F MCB SPN 40 Amps 240 Volts, "C" series complete all as specified and directed

S&F MCB 6 to 32 Amps SP, 240 Volt, "C" series complete all as specified and directed.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:5 of SSR part-1 .

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.

C P Singh and Co

M/S Solanki Brothers

Narendra & Co.

Captainkomalchaharconstructions

SahaDevSingh Constructions