Repair/ Maint of fencing, footpath, compound wall etc under AGE B/R (P-2) at Faridkot Mil Stn

Amount

Dismantling posts or struts (wood, steel or RCC) of any section, including taking out embedded portion in concrete, brick work etc and making good the disturbed ground complete all as specified and directed .

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed .

Dismantling fencing wire mesh, any type complete all as specified and directed .

S&F angle iron posts and struts in fencing, including cutting tops to shape as directed, drilling holes, notching for wire etc,including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 quality complete all as specified and directed

S&F mild steel screw bolts (machine made),diameter of neck 11 to15mm with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n. exc. 5cm long including making holes on existing post without taking down complete all as specified and directed .

S&F mild steel round bars 10mm dia and over,cut to length,bent to shape conforming to Fe-290 Gde E-165 quality complete all as specified and directed .

Supply only mild steel galvanized chain link fencing of size 100mm x 100mm mesh complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account.

Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed .

S&F in repair galvanised,2strand,steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire,staples or steel pins etc. complete all as specified and directed .

M&L for Framed work as in doors or gates etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing using Fe 290 (Gde-E-165) complete. complete all as specified and directed

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for preparation of old steel surfaces including as knotting, stopping, Burning off or removing, scraping etc, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removing of rubbish & debris to a distance not exceeding100 metres complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundations, filling,sub base and mass concrete complete all as specified and directed .

M&L for sand filling under floor/foundation with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed

M&L for hard core of gauge not exceeding 63mm using broken brick aggregate, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .

M&L for Machine pressed precast concret interlocking paver block, any shape and size, conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment (coloured) all as specified and directed .

M&L for Machine pressed precast concret interlocking paver block, any shape and size, conforming to IS-15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment (coloured) all as specified and directed .

Dismantling of depressed precast concrete interlocking paver block of any shape and size and refixing same after making good with PCC/hard core complete all as directed. Note: PCC/Hardcore shall be paid seperately .

M&L for Chequered cement concrete tiles (coloured) ,20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry , with grey cement and pigment ,in floors complete all as specified and directed .

M&L for Pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in kerb stone with plain fair faces, smooth finish, including chamfering, weathering, throating etc set in cement mortar 1:4 including excavtion and earth work for embedding kerb stone at a depth as directed and temping around kerb stone and removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed .

Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .

All as per Srl item No. 23 here-in-before but except bricks complete all as specified and directed .

M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .

M&L for brickwork with fly ash bricks or brick tiles in brick on- edge walls (less than ½ brick thick), built in cement mortar (1:4) complete all as specified and directed .

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channel and drains complete all as specified and directed

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed .

M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

Taking down cement plaster from brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 5mm thick rough cast plaster over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surface including preparation of surfaces and applying two coats of cement base paint complete all as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.

M&L for providing precast cement concrete 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies in between pillars, 25 mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks, kerbs and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

M & L for Pre cast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in manhole cover slab, rounded or chamfered on edge included neccessary formwork, set in cement mortar 1:6 complete all as specified and directed .

M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .

M&L for Mild steel TMT bars 6 to 10mm dia , cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1( using 20mm graded crushed stone aggregates) as in flooring, finishing surfaces even and fair without using extra cement complete all as specified and directed .

M&L for 100mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed . Note :- A Sum of Rs. 71,250.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22 (Schedule of credit) of Tender Documents.

N.G BUILDERS

BANSAL BUILDERS

LM CONSTRUCTIONS

M/S BSS AND SONS

SHIV SHAKTI BUILDERS

MS CHARANJIT SACHDEVA

MN BUILDERS

B.L. Chaudhri and Co.