FIRE FIGHTING

Amount

116 MSB flats fire fighting

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm –dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E” , bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. (Make; OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT.

Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20 mm dia braided thermoplastic hose of 30 metres long so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve & open & close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve,including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers.(Make;OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT. as directed by the department officers.

Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make;OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT.

Supply, and fixing in position of Fire fighting application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make;OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT

Supply of Fire fighting application M.S. Hose Box so that to keep two number of Hose and one number of branch pipe with nozzle. It will have proper glass window type double door with universe open key, painted inside white and outside Post Office red. Near every hydrant point including conveyance, all incidental charges, necessary scaffloding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GAURD / EQUIVALENT.

Supply, erection, testing and commissioning of MS ‘C’ Class heavy duty pipe as per IS 1239, to withstand a developing pressure of 10 kg/Sq.cm including necessary fittings like MS flange of table ‘E’, Elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding. Including one coat metal primer and two coat P.O red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make;JINDAL/EQUIVALENT.

200mm dia

150mm dia

100 mm dia

80 mm dia Hydrant point tapping

65 mm dia

50 mm dia

40 mm dia

25mm dia

Wrapping and coating anti-corrosive treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of Asphalt Tar tape wound over the M.S Pipe as per standard methods as per standard specification as directed by the departmental officers.

150 mm dia pipe

Supply, erection, testing and commissioning of following sizes heavy duty foot valve including all accessories such as MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 150/200 mm dia suction pipeline at sump including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: NORMEX/KARTAR.

150mm dia

100mm dia

Supply, erection, testing and commissioning of Cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: NORMEX/KARTAR .

150 mm dia

100 mm dia

80mm dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 . including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

150mm dia

100mm dia

80mm dia

Supply, erection, testing and commissioning of Gun metal Gate valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make:LEADER/EQUIVALANT.

Supply, erection, testing and commissioning of Gun metal non-return valve of size 50mm dia including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying ,fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers. Make:LEADER/EQUIVALANT.

Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.

3 core 95 sqmm armoured Aluminium cable

3 Core 185 sqmm armoured Aluminium cable

3 Core 10 sqmm armoured Copper cable

10 core 2.5 sqmm armoured Copper cable

2 Core 2.5 sqmm armoured Copper cable

Earthing arrangements with GI earth plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, refilling the sides of foundation with excavated earth as per the standard specification and as directed by the department officers.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14kg range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make: H- GURU / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line indfos or Donfos including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start & auto stop the electrical motor, jockey motor including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: DONFOSS/ INDFOSS / ISI MAKE / EQUIVALENT.

Supply erection testing and commissioning of Electric Motor Driven Fire Pumpset suitable for automatic operation and consisting of following: a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 4550 LPM against a total head of 110 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 1 No. squirrel cage induction motor of 175 HP, 415 Volt, 3 phase 50Hz rating, conforming to IS:325-1978 with class "F" insulation, totally enclosed, IP 55 for enclosure fan cooled type conforming to relevant protection clause of IS 4691,synchronous speed of 2900 RPM. c. Common bed plate fabricated with MS channel / cast iron type for assembling the pump and motor flexible coupling between the pump and the motor with coupling guard for protection - 1 No. d. Making cement concrete foundation suitable for the above pumpset including vibration isolation pads as necessary, foundation bolts, brackets, clamp fixtures, grouting, etc., in accordance with the manufacturer's design and as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard Specification and as directed by the Departmental Officers.

Supply, errection, testing and commissioning of 180 LPM, 70 Meters Head Pressurisation Pump with 10 HP electrical motor of Kirloskar make with suitable base frame including necessary vibration bad mounting etc, including conveying, , fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIRLOSKAR / EQUIVALENT.

Supply , Installation , Testing and commissioning of Diesel engine driven main Fire Pump suitable for automatic operation and consisting of following complete in all respects as required. a)End suction, top discharge Centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq cm at highest and farthest outlet at specified flow of 2280 lpm at 70m head conforming to IS1520. b)68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. c)Auto starting mechanism, 12 volts/24 volts electric starting equipment like self Motor, Dyanamo, Solenoid switches etc., d)110 ltrs capacity Diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and deisel return line port and fuel pre filter, after filter etc., Make : Kirloskar / Equivalent e)exhaust system having flexible metallic mufler,100mm dia MS heavy pipe extended upto 1m. outside pump house duly insulated with 50mm thick glass wool with 1.00 mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition. f) Dash Board consisting the Instruments like Temperature Gauge, Galvano type DC Ammeter, Lub oil Pressure Gauge, Ignition switch, Emergency Stop and all other protection equipment as per specification , stop seleneid for auto stop in the event of fault with audio indicatios, painted with post office red colour etc as required. g)12 V / 24 V , storage battery, maintenance free tape , 180 AH rating. h)M.S fabricated common base plate, coupling guard, foundation bolts etc as required. i) Postioning the Diesel Engine driven Fire Pump over cement concret foundation using suitable size Anti Vibration mounting arrangements. All works carried out as per standard methods instructed by the manufacturer and as directed by the department officers. Make : Kirloskar / Equivalent.

Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry , as directed by the department officers. Make :- Kartar/Omex/Equivalent

Supply, erection, testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, as directed by the department officers. Make : Kartar / Equivalent

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher as per New IS No. 15683, complete with chemical powder, co2 Gas cartridge, Gun metal cap, squeeze grip with nozzle, wall mounting bracket, safety clip etc., as directed by the departmental officers. Make : Excellent / Safety / Equivalent

Supply and fixing of carbon-di-oxide Gas type 2 kg capacity Fire Extinguisher as per New IS No. 15683 complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., as directed by the departmental officers. Make:-Excellent / Safety / First / Equivalent.

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Office

Supply, Installation, testing and commissioning of Micro processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230/24 volt SMPS unit, 2 Nos of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental officers.

Supply, Installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent).

Supply, Installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamp and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)

Supply and laying of FRLS PVC Insulated 2 core 1.5 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamp and etc., as per standard methods and as directed by the Departmental Officers.

Supply, Installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS Junction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Providing , fixing pipe supports from columns/wall or suspenders from roof slab to suit various dia of pipes made out of GI/MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fasterining arrangement design of hanger and should confirm to specification.

100 mm dia

80 mm dia

65/50 mm dia

40 mm dia

Supply, installation, testing and commissioning of 120 Watts, 100 Volt Audio out put Amplifier having 5 Mic input& 2 Aux input, working either in 220-240 Volt, 50/60 Hz single phase AC supply or in 12 Volt DC supply, suitably mounted on wall using Mounting bracket fabricated in MS angle, screws,wooden plug etc., as per standard methods and as directed by the department officers.(AHUZA make SSB-120 Model or equivalent make)

Supply and runs of 2 core 1.5 sqmm multi strand shielded Copper Cable for PA wiring between PA console and PA speaker provided in respective Zone in existing 20/25mm dia PVC pipe as per standard methods and as directed by the department officers.

Supply and laying of 25mm dia PVC conduit Pipe in wall or Ceiling using suitable size GI mounting bracket, anchor Fateners, nylon strap etc., as per standard methods and as directed by the department officers.

Supply and Fixing of Fire rated door with Mild Steel Door Frames 105mm x 57mm X 18 G and 12 G x 50mm Shutter made of GI with PWG finish and honey wool insulations with SS 101mm x 75mm x 3mm SS 304 Ball Bearings Butt Hinges Shutter thickness of 40mm, Lock set – dead lock with both side key, Powdered coated with RAL paint, fire resistant capacity upto 60 minutes. The above assembly mounted on concrete or brick wall, including the cost of cutting, chipping, concrete packing, pastering, Scaffolding all other conveyence etc complete complying with standard specification and as directed by the departmental officers.

Providing Consultancy services for obtaining License from Local Licensing Authority including the cost of preparation of Drawings, application, relevant supporting document, process as per procedure and as directed by the department officers.

Sub Total

Auromaa fire fighting equipment Mfg and services