Construction of Additional class room 02 (G.F-1 F.F.1) at P.S. Besda Jamanvihiri. (1st call)

Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete including cost of formwork in foundation.

Providing material and labour for laying cement concrete 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size and curing complete ,form work and excluding cost of reinforcement for reinforced cement concrete work in foundation, footing, base of columns and mass concrete.

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement : 1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with sheeting of steel sheets etc. in COLUMNS UPTO FLOOR TWO LEVEL. having cross sectional area 0.12 to 0.18 sq.mt.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with sheeting of steel sheets etc. in BEAMS having cross sectional area 0.12 to 0.18 sq.mt. UPTO FLOOR TWO LEVEL.

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal (size ) and curing complete including cost of form work with sheating of steel sheets etc. FOR SLAB MORE THAN 10cm and upto 13cm thick UPTO FLOOR TWO LEVEL

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with sheeting of steel sheets etc. in RCC CHHAJJA UPTO FLOOR TWO LEVEL.

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete (upto 10 ton) up to floor two level.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional (more than 10 ton)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional (more than 10 ton) Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (B) 40mm thick

Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs ABOVE FLOOR TWO LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Providing material and labour for throating on plaster drip and moulding to RCC CHAJJA

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement : 1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with sheeting of steel sheets etc COLUMNS ABOVE FLOOR TWO LEVEL UPTO FLOOR THREE LEVEL. having cross sectional area 0.12 to 0.18 sq.mt.

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with sheeting of steel sheets etc. in BEAMS having cross sectional area 0.12 to 0.18 sq.mt. ABOVE FLOOR TWO LEVEL UPTO FLOOR THREE LEVEL.

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement : 1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with sheeting of steel sheets etc. FOR SLAB MORE THAN 10cm and up to 13cm thick ABOVE FLOOR TWO LEVEL UPTO FLOOR THREE LEVEL.

Providing material and labour for laying C.C. 1:1 ½ :3 ( 1 cement :1 ½ coarse sand :3 graded stone aggregate 20mm nominal size ) and curing complete including cost of form work with with sheeting of steel sheets etc. in RCC CHHAJJA ABOVE FLOOR TWO LEVEL UPTO FLOOR THREE LEVEL.

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete (more than 10 ton) Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level to three level. (more than 10 ton)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional (more than 10 ton) Extra for brick work in superstructure above plinth level upto floor two level and Extra for brick work in superstructure above floor two level to three Level(B) Conventional

Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO TWO LEVEL TO THREE LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs ABOVE TWO LEVEL TO THREE LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick (upto 10 ton)

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. (upto 10 ton)

Appliying priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (C) Ready mixed paint brushing priming for enamel

Providing and fixing on wall face C.I. Rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1- Cement : 2-fine sand) (A) 75 mm dia.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional (more than 10 ton)Extra for brick work in superstructure above three level to four level (B) Conventional

Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering UPTO THREE LEVEL TO FOUR LEVEL finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing Material, Labour and equipments for Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thickjointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : including Khurra & Gola work With average thickness of 120 mm and minimum thickness at khurra as 65 mm, etc complete as directed by engineer-incharge.

Prividing and laying ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 ( 1-Cement : coarse sand ) and joind ed with white cement slurry (upto 10 Ton)

Providing and fixing Point wiring for Light/Fan/Bell/Primary Point with 02 wire 1.50 sq.mm. & earthwire of 1.50 sq.mm (Green) both are of ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected, concealed in /flushed on wall/ceiling, complete with 6A Tission Type ISI marked flush type witch/bell push and accessories erected on polished wooden block/Metal/PVC Boc covered with 3mm thcik laminated sheet. (a) For concealed wiring (c.c. Wiring).

Providing and fixing Point wiring for looped PLUG with tission type single pole ISI marked 6A. Switch and 6A Socket erected with necessary connections erected on polished wooden block/Metal/PVC Box covered with 3mm thick PC(Polycarbonate) laminated sheet for concealed wiring.

Providing and fixing Mains wiring with 1.1 KV graded FRLS PVC insulated ISI marked stranded Copper conductor wire in existing pipe crected with 1.5 sq.mm. copper conductor FRLS PVC insulated stranded wire of green colour for earth. Continuty of following size. (b ) 2 wire 2.5 Sq.mm.

Providing and fixing Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 Volt, A.C. system and having overload and short circuit tripping elements and bearing capacity 10 KA to be erected in existing M.S. box. Confirming to IS 8828/1996 with ISI mark.Category - III.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity.(A) 06 to 32 Amp. Category - III

Providing and erecting Sheet steel powder coated MCB distribution board - flush/surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used. (A) Single phase 4 way single door.

Supplying & erecting funnel tupe earthing having earth plate of following size burried in specifically prepared earth pit 3 mtr. Below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm. Dia G.I. pipe with Funnel with a wire meash for watering & bricks masonary block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double G.I. /Copper earth wire No.6 SWG bolted with lug to the plate and covered in 12mm dia. G.I. pipe 2.5mtr. Long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specification. with 60 x 60 x 0.315 cms copper earth plate.

Supplying and erecting of Approved make Ceiling fan with Double Ball bearing ISI mark with Condenser 230 volt A.C. 50 C/s. 1200mm sweep complete. Canopy & 30cms. Down rod erected on existing hook or clamp with 24/0.2 flat, 3 core flexible wire with earthing.

Approved make C.F.L Retrofit 20/23/25/26 Watt erected if required Cat - III

Approved make fluorescent tube 120 cms. 36/40 watt erected. If requred. Cat III.

Providing & erecting white stove enameled Box type /Minolta fluorescent fitting complete with Electronic Ballast assembly, tube holders erected with lead wires & connection suitable for one tube 36/40 watt. 120 cms. Cat III.

Trisha Construction

Subhash Construction

AKSHAR INFRA

Jignesh K Rathod