Renovation of Old Accounts Section in 2nd Floor of Block-B For Shifting of Health Department at AMC Head Office

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (iv) 12 mm [PWD Bulding Sch. Page No-173 IT No-2

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor [PWD Bulding Sch. Page No-179 IT No- 14

Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from MS sheet & galvanized with Zinc Coating of 150gms/sqm (both side included) as per IS:277 & consisting of angle clets of size 25mm wide X 1.6mm thick with flanges of 27mm & 37mm, at 1200mm centre to centre, flange fixed to the ceiling with dish fastner 12.5mm dia X 50mm long with 6mm dia bolts other flange of fixed clits to the angles of 25X10X0.50mm of required length with nuts & bolts of required size & other end of angle hanger fixed with intermidiate GI Channels 45X15X0.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.56mm thick bottom wedge of 80mm width tappered flanges of 26mm each having lips of 10.5mm, at 450mm centr to centre, shall be fixed in a direction perpendicular t GI intermidiate channel with connecting clips made out of 2.64mm dia into 230mm long GI wire at evry junction including fixing perimiter channels 0.5mm thk. 27mm having flanges of 20mm & 30 mm long, the perimiter of ceiling fixed to wall/ partitions with the help of raw plugs at 450mm entre with 25mm long dry wall screws all as per manufacturers specifications & also including the cost of making openings for light fittings grills diffusers counts made with frame of perimeter channels suitably fixed all complete as per drawings , specifications & directin of EIC but excluding the cost of painting with :(ISI Mark on board.) [PWD Bulding Sch. Page No- 165 IT No- 17 5th corr.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (b) 25mm thick shutters (single leaf) [PWD Bulding Sch. Page No- 124 IT No- 12

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. [PWD Bulding Sch. Page No- 143 IT No- 17

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. [PWD Bulding Sch. Page No- 143 IT No- 23

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: a) With continuous plate base (Hexagonal/ Round rod) (vii) 150 mm grip x 12 mm dia rod. [PWD Bulding Sch. Page No- 146 IT No- 30

Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws. (f) 125mm. X 125mm. X 27mm. X 2.50mm. [PWD Bulding Sch. Page No- 141 IT No- 6

Supplying, fitting and fixing Godrej Multi Lock or equivallent. [PWD Bulding Sch. Page No- 147 IT No- 39

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [PWD SOR, P- E-9, IT-1.v]

Supply & fixing of Green LED ultimatre square (6'X6') , incl. cutting the false ceiling in requd. Dimesion also the wiring and connection of the light by 1.5 sqmm wire complete. Havells make 18 watt [Irrigation & waterways SOR, P-110, It-5.3. F.7]

Supply and delivery of 1200mm sweep, 1 Phase, 60/70 watt, 5star having 300mm down rod 1.1mm thick aluminium bled conferming IS374, 2mm shank thickness celling fan of following make. Havells/Crompton Graves Make (60 Watt) [UD &MA SOR, P- 23, It-74 B]

Supplying Fitting & Fixing Of Revolving Executive Chair Make : Damro/Godrej/ Aashra [W/o No- 115/WS/Eng/2025 dated-02.06.2025]

Supplying Fitting & Fixing PVC chair with cushion and side handle. Make: Supreme /Godrej/ Neelkamal . [W/o No- 115/WS/Eng/2025 dated-02.06.2025]

Supplying, Fitting and Fixing of Roller blinds except white colour which is excellent quality fabric including MS roller stand with powder coated & M.S channel for blind adjustment, elegance and versatility. On the one hand, their simple design with straight lines allows them to complement any space without drawing too much attention. They are ideal especially for the minimalist, classic or industrial designs. On the other hand, their versatility is manifested mainly in the wide variety of materials and colors in which they can be manufactured. with necessary fitting complete in all respect of as specified in the drawings in accordance with the Architects Instructions and as specified design of Architect / EIC. [W/o No- 115/WS/Eng/2025 dated-02.06.2025]

Add GST 18 %

Add CESS @ 1 %