Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹17.4 L+₹1.7 L (10.5%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L2 | Rejected-Finance Higher Bid value. | |
| 3 | L3₹17.7 L+₹1.9 L (12.2%)Rejected-Finance | L3 | Rejected-Finance Higher Bid value. | |
| 4 | L4₹18.0 L+₹2.2 L (14.0%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value. | |
| 5 | L5₹18.2 L+₹2.5 L (15.6%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value. |
Tender Value
₹15.1 L
EMD Value
₹30,100
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
SPL REPAIR TO BLDG NOS P150 AND CERTAIN OTHER SANCTIONED WORKS AT NEW MIL STN UNDER GE GANGTOK
2022_MES_571315_2
8119/A/E8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents.
8 documents required · 8 mandatory
₹500
GE Gangtok
₹30,100
Yes
11 Feb 2023
17 Jan 2023
6 Feb 2023
17 Jan 2023
4 Feb 2023
23 Jan 2023
Amount
SCHEDULE 'A' (B/R WORKS) Dismantling old PGI/CGI sheeting any gauge, thickness including Nainital, Sikkim or similar pattern roof/facia etc complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.
Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (un-reinforced) below or above ground level complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in- Charge.
Supply and fix 0.50mm thick pre-paintedgalvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley,eaves,etc fixed with self tapping screws complete all as specifiec and directed by the Engr-in-Charge.
M&L Hardcore of gauge n exc. 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by the Engr-in-Charge.
S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified.
Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
M&L for pre cast cement concrete block masonry with solid blocks, exc. 10 cm in width and settting in cement mortar 1:6 in PCC (1:3:6) type C-1 complete all as specified and as directed.
M&L rendering 15mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate ) as in plinth protection; path / hardstanding etc finished the concrete surfaces even and smooth without using extra cement complete all as specified and as directed
S&F Mild Steel rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle clear or other connecting plates conforing to Fe-410-W(Gde-E-250 quality-A)including one coat of red oxide zinc chrome primer after preparation of surfaces at contractor''s workshop before fabrication complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously un-treated steel surfaces of any description over 10cm in width or girth including preparation of new steel surfaces complete all as specified and as directed.
Supply and fix galvanised steel water tubing 20 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed.
Supply and fix galvanised steel water tubing 15 mm bore , medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed.
Demolition of concrete of any descripion and in any position not otherwise specially provided for complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and as directed.
Dismantling of wall and ceiling hard boards/AC sheets(Fibre pulp insulation etc) or insulation board and plywood in any thickness & any position including cover fillets complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base of floor finished even and rough to receive topping layer complete all as specified and as directed.
Taking down chowkats with shutter of any description (without taking down shutter from the frame) n.exc. 1.5 Sqm each and refixing in same or other opening after easing adjustment complete all as directed.
Material & labour for rendering 20 mm thick in cement mortar (1:4) in two layer of 10 mm thick and 5mm thick each with using Water Proofing Compound @ 3% of weight of cement shall be mixed with cement mortar in finishing outer layer only, as per manufacturer instruction, on fair face of brick work or concrete surfaces, finished fair and even with out using extra cement complete all as specified and as directed.
M&L for applying two coats of exterior acrylic emulsion weather proof paint over a coat of primer on new/old plastered surface etc complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over new wall surface on a coat wall care putty complete all as specified and as directed.
M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer applied over 3mm thick wall care putty complete all as specified and as directed.
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partitions of 600mmx600mm size fixed to walls with rawl plugs & screws and hanges to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 23mmx28mmx0.30 thick thick, cross tee shall be 23mmx28mmx0.30mm thick and wall angle shall be 20mm x20mm x0.30mm thick complete all as specified and as directed.
S&F 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595x595mm size fixd with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and as directed.
Hacking out old broken glass any thickness, size, quality or description from metal/wooden frame including puching or drilling out old glazing pins and removal of demolished material from site complete all as specified and as directed.
M&L for preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint over old steel surface complete all as specified and as directed.
S&F in repair 3.0 mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n.exc 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.
S&F as in repair stain less steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40m and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains including forming fair finished to drain channel complete all as specified and as directed.
Material & labour for non skid coloured ceramic tiles of 7 to 8mm thick ( Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.36 Sqm as in floors etc conforming to IS-13712, grade B-II-(a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.
All as per Sl item No. 37 above but on vertical surfaces of wall like skerting/dao etc on 15mm thick rendering complete all as specified and as directed.
Supply only Water Proofing Compound complete all as specified and as directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in plinth/hardstanding finished the concrete surfaces even and fair etc complete all as specified and as directed.
M&L for 75mm thick PCC (1:2:4), type B-2(using 40mm graded stone aggregate) as in floor finished even and fair complete all as specified and as directed.
M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor finishing the surface even and fair complete all as specified and as directed.
S&F 38mm wide x 3mm thick Glass dividing strips, as in floor complete all as specified and as directed.
M&L for 2nd class hardwood timber scantling of any size or in any position such as truss, purlin etc and fix in repairs, to replace old and decayed timber (including piercing, scarifying etc of old and new timbers if required) and removing defective portions to store complete all as specified and as directed.
Materials & labour for 4 mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber frame work in wall / ceiling complete all as specified and as directed.
Materials and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails, cross sectional area exc 6 sq.cm & n.exc 13 sq.cm, complete all as specified and as directed.
Supply and fix flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and fix 150 mm long aluminium handles, cast type, anodised complete all as specified and as directed.
S&F 250 mm aluminium anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
M&L for RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in foundations, including raft footings, foundation beams, plinth beams, bases for columns, lintel beam, cover slab etc basement slabs, under remaed piles and mass concrete including necessary formwork complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.
Excavating in post holes (or similar holes) each n.ec 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceding 25cm complete all as specified and as directed.
M&L for applying three coats of white wash on new plastered wall surface including preparation of new and previously untreated surfaces of wall complete all as specified and as directed.
M&L for applying two coats of white wash on old plastered wall surface including preparation of old surfaces of wall complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 (20mm graded aggregate) as in coping, roof kerb, bed plates, parapet, plinth course including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
Taking down 15mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as specified and as directed.
Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as specified and as directed.
Refixing of old 15mm bore steel tubing and connections in new or old position (wall, ceiling or floor etc) complete all as specified and as directed.
Supply and fix vitreous china, white colour flat back, wash hand basin (full padestal pattern) of size 540 x 395x 185mm fixed with and including fixing accessories like CP wate coupling (half or full threaded, waste pipe etc complete all as specified and as directed. Make : Cera Model CORNET Cat No S2040105 & S2090101 or equivalent approved .
S&F chromium plated central hole basin mixer extended casted spout with 450mm long braided hoses. Make : Essco Cat Part No. DLX-516KN or equivalent.
Supply & fix 15mm bore dia angular stop cocks with flange, chromium plated, with wall flange screwed down, screwed from iron pipe or union and complete all as specified and as directed Make: Cera CAT No : QT F2006201/HTF3001201 or equivalent approved complete all as specified and as directed.
Excavating in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out as in soft/loose soil for foundation etc complete all as specified and as directed.
M & L walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1: 6 incl brought upto course at interval of every 60cm complete all as specified and as directed.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in thick as in soft/loose soils complete all as specified and directed.
Removing surplus soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed.
Disconnecting existing tanks of capacity exc 500 Ltr but n.exc 1000 Ltr setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. Note : - Cleaning, repairing etc shall be measured separately.
M/S S. S CHETTRI AND SONS
M/S ANIL KUMAR THAKUR
KAMLESH ENTERPRISE
DHARMINDER SINGH
SANJAY KAUSHIK
M/S MANOJ VERMA
NISHA CONSTRUCTIONS
GEETA CONSTRUCTION
KARMA SHERPA
KARMA TSETEN BHUTIA
MAHENDRA KHAWAS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .