Renovation works for the Government Girls Higher Secondary School Building at Arcot in Ranipet District for the establishment of school of excellence in the academic year 2022 2023

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

2.6 : Supply and filling of 40 mm HBSJ

2.7 : Supply and filling of 20 mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

30 : Ellispattern

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

WATER SUPPLY ARRANGEMENTS 51.2: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

74 : Charges for fixing of "Fan"

112 : S & F of Exhaust Fan 300 mm dia

ANNEXURE-I 2.1.3 : Filling crushed stone sand

3.1.1: C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1: P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1: P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.5.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

9.5.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Ground floor / Stilt floor

10.5.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b. In Ground Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In foundation and basment

b. In stilt / Ground Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Including plasticizer

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In GF

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3: Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

c) 50mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

71.2: Supplying and fixing of 32Amps triple pole main switch with fuse and neutral link

71.3: Supplying and fixing of 63Amps triple pole main switch with fuse and neutral link

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with electronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80.1: S & F of 450 x 375 x 20mm thick TW plank

211.2: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete in all respect and as directed by the departmental officers.

218: Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

243: Dismantling the existing floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant etc., all complete in all respect and as directed by the departmental officers.

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

799 : Two coats of OBD over one coat white cement for inner walls

ANNEXURE-II A1: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring) a. Light Point with ceiling rose.

A2: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (Open wiring)

A3: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(open Wiring)

A4 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring)

A5 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring)

A6 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring)

A7: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A8: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 12 watts LED bulb

A9: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A10: Suppying and fixing of Eco friendly Virg Brand Sanitary pad destroyer made inIndia of Operated by electricity,Model MSMAX3000 of dimension 445x485x795mm as directed by the departmenal officers.

A11: Thorough scrapping of the old plastered surface as directed by the departmental officers.

A12: Painting two coats for old walls with ready mixed plastic emulson paint of first class quality paint of approved colour and shade over a priming coat, including thorough scrapping, clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, patty etc., (paints and its shade shall be got approved from the Executive Engineer before using)

A13: Painting the old walls with two coats of approved best oil bound distemper paint int over cement plastered wall surfaces and ceiling including cost of cement paints, putty, brushes, watering, curing, etc., all complete as directed by the departmental officers (paints and its shade shall be got approved from the Executive Engineer before using)

A14: White washing two coats for old walls using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., all complete.

A15: Applying two coats of weather coat painting over the terrace floor (Incl. testing) (Terrace water proofing work: The existing pressed tiles surface to cleaning water wash using with wire brush, the tiles joints are rack out using machine without damaging the existing structure and clean the joint. Fosroc chemical, Nito bond SBR add with water ratio of 1:1 apply in the joints then Nito bond SBR add with cement, sand, water and red oxide for the ratio of 1:1:1:1/2 after fosroc brand or equalent chemical roof guard add with water for the ratio of 4:1 applying top of surfaces. After 24 hours another second coat applying the all process completed water stagnant of 48 hours for treated place any damages to ensure slab to all complete and as directed by the departmental officers.

A16: Painting the old Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, with relevant Standard specifications. (paints and its shade shall be got approved from the Executive Engineer before using)

A17: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using sand paper as required by the departmental officers including cost of material, labour for painting, etc all complete (paints and its shade shall be got approved from the Executive Engineer before using)

A18: Labour charge to remove and root out the plants and trees from buildings without out damaging the building structure including tools and planks and chemicals poured in to the root out point as directed by department officer etc complete.

A19: Supplying and fixing of Stainless steel sink 1200X550X180mm size of best quality including cost of sink with required specials and labour for fixing etc, all complete and as directed by the departmental officers.

A20: Repair works to the existing verandah grill gate including cost of labour, welding charges, welding machine & other materials etc., all complete and as directed by the departmental officers.

A21: Repair works in existing panelled door window, including cost of materials, removing and refixing charges, machine & other materials etc., all complete and as directed by the departmental officers.

A22: Painting the existing Black board with two coats of approved first class ready mixed paint of approved quality and brand, including the cost of paint, brushes, sand paper and scrapping etc., all complete and as directed by the departmental officers.

A23: Student four seater Desk Supplying of four seater with desk and seater of size,Top desk-72"x18"x30"-1No and seater-72"x15"18" 1No .Top 18G seat shutter with book shelf with square pipe 11/4 pipe of 18 gage as directed by the departmental officers.

External Electrical arrangements: A24: Supplying and laying of following dia GI pipe "B" Class of best and approved quality having ISI mark including cost of materials & labour charges, coveyance and delivery at site etc., all complete and as directed by the departmental officers. (Above GL) a) 80mm dia GI pipe

A25: Supplying and laying of following dia GI pipe "B" Class of best and approved quality having ISI mark including cost of materials and labour charges for earth work excavation, laying, jointing and cost of conveyance charges with necessary specials etc., all complete and as directed by the departmental officers. (Below GL) a) 50mm dia GI Pipe

A26: Supplying and delivery of following LTUG Cable from meter board to fornt of the block and EB pole top for EB service connection etc..,all complete and as directed by the departmental officers. (The brand should be got approved by the Executive Engineer before use) a) 3.5core 50sqmm LTUG cable

b) 3.5core 25sqmm LTUG cable

c) 4 core 10sqmm LTUG cable

A27: Labour Charges for laying of LTUG cable above G.L including conveying and fixing of UG cables on wall or ceiling of varies with necessary MS clamps, brass screws including cost of all materials redoing the dismantled portion etc., all complete and as directed by the departmental officers.

A28: Labour charges for laying of LTUG cable below GL including Charges for conveying and laying, earth work excavation and refilling and providing sand cushion, brick layer protection, etc., all complete for UG cable of sizes 4 to 25 mm and 2/3/3.5/4 core.

A29: Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cable, including fixing charges and cost of materials etc., all complete and as directed by the departmental officers. a) 3.5core 50 Sq mm LTUG cable

b) 3.5 core 25 Sq mm LTUG cable

c) 4 core 10 Sq mm LTUG cable

A30: Supply & fixing of cable gland suitable for following PVC armoured LTUG cable etc., including fixing charges and cost of materials etc., all complete and as directed by the departmental officers. a) 3.5core 50 Sq mm LTUG cable

b) 3.5 core 25 Sq mm LTUG cable

c) 4 core 10 Sq mm LTUG cable

A31: Supplying and fixing 3 Nos. 63Amps 500 volts porcelain fuse unit

A32: Supply & erection of following floor mounting panel board (Cubical type) with bus bar chamber a) EB Metering panel board (900x900x250mm)

b) MV panel board (1200x900x250mm)

c) PCC panel board (900x900x250mm)

A33: Supplying and fixing of 1 No three phase 6 Way Vertical TPN Distributions boards; IP43 with double door (Metal); with 12 module incomers and 18 Single Phase / Three Phase / MCB's outgoing; as per IS

A34: Supplying and fixing 6 A to 20 A, 32 A single pole miniature circuit breaker (MCB) for outgoing breaker with ISI marked The mCB will be fixed on the existing distribution box including labour charges for all inter connection etc., completed.

A35: Supply M.S clamps using mild steel flats of suitable for fixing the GI pipe with EB pole with MS flat and required bolt & nuts including labour charges and materials etc., all complete.

A36: Supply and Installation of DAHUA DH-IPC-HDW2431TP-AS-S2 Enhanced 4MP series25 fps @4mp, h.265+3.6mm fixed lens, built in mic, 30 mtrs ir WDR ip 67 rating, inbuilt SD card slot.,all complete and as directed by the departmental officers.

A37: Supply and Installation PVC Encloser Box IP66 For Camera etc.,all complete and as directed by the departmental officers

A38: Supply and Installation of western Digital WD Purple 10 TB 3.5 HDD Surveillance 7200 RPM 256 MB Sata 3 etc.,all complete and as directed by the departmental officers.

A39: Supply Installation of PTZ MOUNT KIT etc.,all complete and as directed by the departmental officers.

A40: Supply & installation of 4 port POE switch CP plus Un Managed 10/100 Mps with Dual uplink etc as directed by the departmental officers.

A41: Supply and Installation of Acer 127 cm ( 50 inchs) I Series 4 K Ulltra HD Andriod smart LED TV AR 50 AR2851 UDFL (Black) etc.,all complete and as directed by the departmental officers.

A42: Supply of CAT 6E Honeywell Cable 23SWG 305 MTRS etc.,all complete and as directed by the departmental officers.

A43: Supply and Installation 6U Rack with power spike & Two Tary 550D rack, Rackmountinf screws, etc all complete as directed by department officers.

A44: Supply and Installation of HDMI Cable 5 Mtrs Hifocus etc.,all complete as directed by the departmental officers.

A45: Supply and Installation of 1.5 Mtrs HDMI cable Hifoucs etc.,all complete as directed by the departmental officers.

A46: Supply and Installation of HDMI Spliter Genric etc.,all complete as directed by the departmental officers.

A47: Supply and Installation of Marx HDMI extender 60 mtrs thirough cat6E (for 3RD TV SP Viewing) etc.,all complete as directed by the departmental officers.

A48: Installation of CAT 6E cable installation in provided pvc pipe, camer installation fixing of enclouser box for camera etc.,all complete as directed by the departmental officers.

A49: Installation & Configuration, Testing of camera as directed by the departmental officer

A50: NVR Installation & Configuration, Testing, Commissioning and as directed by the departmental officers.

A51: Supply and Installation of PVC pipe with clamp, screws, bend, junction etc for 300 Mtrs.

Cycle Shed arrangements: A52: Supplying, fixing in position of following dia M.S pipe for post,MS 50x50x3mm thick Square tube for purlin, including the cost of materials, cutting, weilding, fabricating, transportation charges and labor chargres etc all complete and as directed by the departmental officers.

A53: Supply and laying of 25mm dia Gi pipe of best and approved quality for laying the cable etc., all complete.

A54: Fabricating Supplying sectioning of PPGI sheet for the specifications. The materials should be PPGI file profile with a blue colour or any other approved design 0.56mm thick 24 gauge having width 1050mm.

A55: Supply and Installation Ahuja Two Zone Amplifier Model No: TZA2000DP all complete complying with relevant standard specifications and as directed by the departmental officers.

A56: Supply and Installation of Ahuja ASX612BT 2-way wall mount Speaker all complete complying with relevant standard specifications and as directed by the departmental officers.(The quality and brand should be got approved from Executive Engineer before use)

A57: Supply and Installation of Studiomaster XR80HH Dual wireless Microphone etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A58: Supply and Installation of Studiomaster XR60 Single lable Microphone etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A59: Supply and Installation of Studiomaster XRHM1 Head band etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A60: Supplying and laying of Connecting cables with PVC pipe and accessories etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A61: Supply and laying of 2 core 1.5 Sq.mm speaker cable with PVC pipe and accessories etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A62: Supply and Installtion of OPTOMA LCD projector Model: X400LV - 4000 Lumens. etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A63: Supply and Installation of 8’x 6’ MW Motorized wall mount projector screen etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A64: Supply and installation of 3 feet Ceiling Mount kit etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A65: Supply and installation of NT 15mt HDMI Cable with PVC pipe and accessories etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A66: Supply and installation of 15mt Power Cable with PVC pipe and accessories etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A67:Supply and installation of 15mt Audio Cable with PVC pipe and accessories etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A68: Supply and installation of Pop up box with HDMI / VGA / CAT6 / Audio etc., all complete complying with relevant standard specifications and as directed by the departmental officers.

A69: Supplying and fixing of Gong bell 12'' size suitable for 250V including cost of all materials, inter connection etc., all complete and as directed by the departmental officers. (The materials should be got approved from the EE before use)

A70: Supplying delivery fabrication of MS door and windows of MS doors and windows with outer frame and shutter frame in MS angle of size 40mmx40mmx6mm with MS flat 25mmx25mmx6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rod with locking arrangements including two coats of approved enemal paint over coat of red oxide including cost of angles,plates ,sheets,fabricating charges ,cost of hold fast and transporting charges etc complete.(1.00x2.50)

A71: Plastering with CM 1:3 (one of cement and three of crushed stone sand) 20mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding etc., complete in all respects and complying with standard specifications.

A72: Supplying and delivery of hydraulic tested three phase 2HP submersible pumpset as per the motor and pump should be confirming to relevent IS Specification with ISI mark suitable for the following requirments .The brand name of the pump and motor HP rating should be specified. Head :150 feet or 46.00 meter Discharge:1.40 - 0.40 LPS, Delivery : 32mm

A73: Supply and delivery of Panel board with two level guard auto start with ISI Mark for single phase wall mounted type with ammeter, voltmeter,indicating lamps ON/OFF push buttons with necessary controls and three phase cum dry running etc.,

A74: Labour charges for Erection of Horizontal shapumpset in borewell/Open well including fixing suction pipe and foot valve to the required depth valves errection clamps, pressure guages up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete

A75: Supply and delivery of 3 core 4.0 sqmm 1100v grade copper UG flat cable of best and approved quality having ISI mark etc., all complete as directed by the departnental officers.

Haarine Associates

BUILDSAID ENTERPRISES