Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.8 L
EMD Value
₹30,000
Closing Date
5 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE Pune
CWE Pune
REPAIRS TO INTERNAL ROAD AT KOLHAPUR MIL STATION UNDER GE (NORTH) PUNE
2026_MES_798986_1
84902
Open Tender
Civil Works - Roads
Item Rate
90 days
GE (N) Pune
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE North Pune
₹30,000
Yes
16 Nov 2026
16 Nov 2026
8 Dec 2026
16 Nov 2026
5 Dec 2026
30 Nov 2026
16 Nov 2026 - 25 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | IMPORTANT NOTES :
(i) Contractor are requested to note that IRI Value test (Road Roughness) as mentioned in Schedule 'A' Notes on Ser. Page No. 19 of Tender documents against Phase-I will be carried out before execution and after completion of BM / DAC / SDAC.
(ii) The quoted rates for the IRI value test is deemed to be included against the relevant BOQ items for BM / DAC / SDAC.
(iii) No extra cost / amount will be admissible on this account. | - | - | - | - |
| - | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and depth/deep exc 50mm but not exc 100mm and removing scarified material to a distance not exc. 50 M and stacking wherever directed complete all as specified and directed. | 2 | TEN SQM | - | - |
| - | M&L for Laying and compacting 75 mm thick (compacted thickness) WMM grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and as directed. | 2 | TEN SQM | - | - |
| - | M&L for providing and laying 75mm or less thickness (consolidated thickness) premixed bituminous macadam (design mix) with crushed and graded coarse stone aggregate filler and sand (fine aggregate) mixed with 4% binder content (using paving bitumen VG-30 grade by weight of total mix) mixing bituminous macadam in the hot mix mechanical plant and laid with mechanical paver complete rolled with 8 to 12 tonne power roller to required camber and gradient complete all as specified and as directed.
(NOTE : (i) Mixing of BM shall be carried out in Hot Mix plant & laying, spreading of BM shall be carried out uniformly by using automatic type sensor paver.
(ii) The design mix for BM considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate.
(iii) The quantity of bitumen shall be provided as per design mix approved by GE) | 12 | CUM | - | - |
| - | M&L for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen of VG-10 grade @ 2.5 Kg per 10 Sqm with mechanical pressure sprayer over old black top surfaces etc complete all as specified and as directed. | 268 | TEN SQM | - | - |
| - | Repairs to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and rolled with tandem vibratory roller to a uniform smooth surface complete all as specified and directed. | 2.5 | TEN SQM | - | - |
| - | Providing Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with minimum 5% binder content by weight of total mix, using paving bitumen (VG -30), rolled and compacted to required camber and gradient complete all as specified and directed.
Note :- (i) Mixing of SDAC shall be carried out in Hot Mix plant and laying, spreading of BM shall be carried out uniformly by using automatic type sensor paver.
(ii) The design mix for BM considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate.
(iii) Work shall be executed as per design mix as approved by GE.
(iv) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government.
(v) Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No. | 280 | TEN SQM | - | - |
| - | M&L hot applied thermoplastic compound exc 10 CM width and 2.5mm thick (excluding thickness of glass beads ) for marking lines dashes, arrows, letters etc on road, pavements and the like and providing selecting glass beads @ 250gm per sqm as per IRC-135, by mechanical machine white/ yellow colour as in road surface etc.finished surface to be levelled uniform and free from streaks and holes including cleaning of surface to remove all loose dirt complete all as specified & directed. | 100 | SQM | - | - |
| - | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. | 100 | EACH | - | - |
| - | S&F in repairs HDPE Speed bump / breaker (SB-01) of size 250mm x 750mm x 75mm having pre-coloured material (Black / Yellow Colour) and UV stabilizers keep them perpetually colourful, studded with reflectors on either side, clearly visible to the motorists during night hours. The speed bumps shall be fixed to the road surface using the installation procedure as clean the surface, mark the nails points, grout the holes and clean the surface again and apply appropriate epoxy the nails provided with the Bumps fixed as per the Manufacturer's Instructions including taking down and removing rubbish material to outside MD land complete all as specified and directed.
(Note : Sample / Makes for Speed Bumps shall be got approved by GE prior to procurement.) | 6 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
84902TenderDocs.pdf
Tender Documents • 0.78 MB
BOQ_896366.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .