WELCOME MAINT AND EXTERNAL WEATHER PROOF PAINT OF OFFR MD ACCN AT MUDFORT, MALHOTRA ENCLAVE AND HAMID LINES UNDER AGE BR SOUTH NO II OF GE SOUTH SECUNDERABAD

Amount

M&L for Preparation of plastered or unplastered old decorated surfaces including removal of loose flakes and applying one coat of white wash on walls using roller only complete all as specified and directed.

All as per item No. 1 here-in-above but on ceiling surfaces

All as per item No 1 here-in-above but one coat of colour wash

All as per item No 1 above but one coat of oil bound distember on walls

Ditto as per item No 1 here-in-above but one coat of oil bound distember on ceilings

M & L for one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10cm width or girth.including preparation of old painted surfaces all as specified and directed.

M & L for one coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, over 10cm width or girth.including preparation of old painted surfaces all as specified and directed.

M & L Preparation of plastered or unplastered old decorated surfaces including removal of loose flakes of wall and applying one coat of cement base paint all as specified and directed.

Removal of existing treatment on walls including removal of loose flakes and applying two coats of OBD Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of OBD of any tint using roller only complete all as specified and directed.

M&L Removal of existing treatment on walls including removal of loose flakes and applying two coats of anti fungal wether proof paint (Appex ultima or equivalent) over one coat of primer and putty to any tint using roller only complete all as specified and as directed.

M&L for writing Bldg no (30 Cms dia background black 15 cm height letter in White Paint) complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster from brick or concrete surface of walls/ celing etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick in cement mortar 1:6 over brick work including finishing fair and even and smooth without using extra cemen complete all as specified and directed.

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and Smooth without using extra cement. complete all as specified and directed incl scaffolding if necessary. Note : Patch work upto height 7.50m incl necessary scaffolding.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M&L for Preparation of new plastered surfaces of walls including removal of loose flakes and applying two coats of OBD over one coat of primer of any tint using roller only complete all as specified and directed.

M&L for applying three coats of white wash including removal of loose flakes on ceiling preparation of new plastered ceiling surfaces using roller only complete all as specified and as directed.

M & L Preparation of new plastered surfaces of wall including removal of loose flakes and applying two coats of cement base paint over acoat of primer using roller only complete all as directed and as specified.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqn each. all as specified and directed.

All as per item No 19 here-in-above but area exc. 1.5 Sq.m but not exc. 4 Sq.m each. all as specified and directed.

Taking down shutters of any description not exc. 1.00 Sq.m each. all as specified and directed.

All as per item No 21 here-in-above but exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each. all as specified and directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply the size of rail and stile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). all as specified and directed.

S&F 30mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides. all as specified and directed.

S & F stainless steel butt hinges 100mm long all as specified and directed.

S&F 100mm long MS butt hinges, medium weight cold rolled. all as specified and directed.

S & F Aluminium handle 150mm fabricated type complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified & directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F 300 mm long helical door springs including roller plate complete all as specified & directed.

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

All as per item no 36 here-in-above butwithout glazing bars

S & F, steel ventilators with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified & directed.

All as per item No.40 here-in-above but fixed in repairs complete all as specified & directed..

Hacking out old broken glass any description & size from wooden/steel window and removal of rubbish from work site as directed.

S & F 3mm th sheet glass ordinary quality and fixed with oil putty in square not exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified & directed.

S&F power coated aluminium curtaion rod 20 mm dia incl bracket and knob complete all as specified.

M & L for preparation of new wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.all as specified and directed.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip.complete all as sepcified and directed by Engr-In-Charge.

M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed by Engr-In-Charge.

Demolition of cement concrete(unreinforced) in ground floors and paving nexc 15 cm thickness (below and above ground level) complete all as specified & directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified & directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

M&L cement concrete 40mm thick type B- 1, 1:2:4 (20mm graded agg) as in floor finishing cement concrete surface even and smoothwithout using extra cement all as specified and directed...

M&L forming 38mm wide construction joints Glass dividing strips, 3 mm thick complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B 0 using 12.5 mm graded aggregate as in level course on floor etc complete all as specified and as directed.

M&L for Vitrified ceramic tiles dark shade10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4.mm all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified & directed.

Material & labour for glazed ceramic tiles coloured of size 300 x 200 x 6 to 7mm, as on vertical surfaces such as skirting, dados etc including 10mm thick CM 1:4 rendering and set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed .

M&L Granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including its dismantling.all as specified and directed

S&Fin repair WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection, waste pipe and CP piller tap complete. all as specified & directed

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl "P" or "S" trap with flat bottom and mild steel chromium plated or aluminised hinging device , 10 ltrs capacity PVC Low level Flushing incl flushing pipe of low density PVC 32mm dia complete

Taking down the plaster incl existing treatment in sunken portion , washing down with water and applying 15mm tick plaster in CM 1:4 with 3% WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:4:8 type D-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. .

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.all as specified & directed

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed

S&F in repair pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe all as specified and directed

S & F in repair fancy type stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe 15mm dia all as specified and directed

S&F in repair bib tap 15 mm dia , fancy type, chromium plated, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixed in repair CP 15mm dia health flaucet with CP flexible 1.5 mtr tube complete in all respect as specified and directed by Engr-in-Charge.

S & F in repair CP long body two Way Bib Cock 15mm dia with Wall Flange complete in all respect as specified and directed by Engr-in-Charge.

S&F in repair chromium plated swivel shower complete all as specified and as directed.

S & F in repair Wall Mixture cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F320011)

S & F in repair Single lever Basin Mixer w/o Popup Waste cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F400009)

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated.all as specified and directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag) all as directed by Engr-in-charge.

S&F in repairs stainless steel Kitchen plate rack of 28 gauge of size 34"x35"x9" (make : Hindustan) all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc all as specified.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls/laid in floors or trenches all as specified.

S&F PVC(SWR) bends any radius 110 mm bore provided with access door.all as specified and directed.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repairs all as specified and directed

S&F in repair two way angle cock 15 mm chromium plated complete fancy type of branded as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified & directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified & directed

S&F for 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down complete all as specified & directed

S.R.M.K Enterprises

M/S V PRATAP REDDY

abhilasha constructions

RAM CHARAN CONSTRUCTIONS

G RANGA RAO

PARDEEP AND CO

BALAJI ENTERPRISES