SPECIAL REPAIRS TO BUILDING NO P-427 (CENTRAL LIBRARY) AT CME

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets. Complete all as specified and as directed by Engr in Charge.

M & L for false ceiling with 4 mm thick gypsum board in ceiling including GI U-section 50 mmx35mmx7mm & edge side GI U-section size 30mmx25mm x15mmx7mm, aluminium grid section size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed as per manufacture instruction make : Armstrong or equivalent as approved by GE.

Demolition of cement Concrete in flooring and pavings n exc 15 cm thick below or above ground levelComplete all as specified and as directed by Engr in Charge.

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in sub base of floors 25mm thick Complete all as specified and as directed by Engr in Charge.

M&L Light shade vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding .18 sqm but not exceeding 0.36 , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed Bed 15 mm thick in Cement Mortar (1:6) Complete all as specified and as directed by Engr in Charge.

All as per item No 7 above but on vertical surface such as skirting , dado etc over and including backing coat 10mm thick in CM 1:3 all as complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and as directed by Engr in Charge.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15 mm thick screed bed in cement mortar (1:6) including dismantling of existing stone/stone slab of any description complete all as specified and directed.

M&L for machine cut kota stone 20 to 25mm thick as in skirting /Dado, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of kota stone slab including, rubbing and mirror polishing laid over and including 10mm thick backing coat in cement mortar (1:4). Complete all as specified and as directed by Engr in Charge.

Rounding to edges of stone slabs , such as in steps, cooking platform, and other similar situation Complete all as specified and as directed by Engr in Charge.

S&F for aluminium anodized three track sliding window with two or more shutter with 4 mm thick plain glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catalogue including taking down existing old window of any description complete all as sspecified and directed by Engr -in-Charge

S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality partly glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anidised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x2.00 mm as per spd.

(d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002 Make-Jindal or equvalent indiviual shutters /leaf (f) Floor spring Make-Sandhu, (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particle board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass/frosted(Colour) 5mm thick Make : Saint gobain, modigaurd

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc Complete all as specified and as directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises Complete all as specified and as directed by Engr in Charge.

M&L non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match (Size of tile 400mmx400mm and thickness not exceeding 10mm joint free tiles) over and including 15mm thick screed bed in CM 1:6 Complete all as specified and as directed by Engr in Charge.

M&L for coloured glazed ceramic tiles 350mmx250mm x7mm/450mmx350mmx7mm thick & boarder in vertical surfaces such as skirting , dado etc set & jointed in neat cement slurry & pointed in coloured cement to match fixed including over backing coat 10mm thick in CM 1:4 Complete all as specified and as directed by Engr in Charge.

S & F in repair 15 mm bore bib tap, brass chromium plated with wall flange, fancy type with long shank and crutch handle, screwed down, screwed for iron pipe complete all as specified and as directed . Make : Jaquar CONTINENTAL SERIES CAT No CON-047KN or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F in repair brass chromium Angular stop cock with wall flange of 15mm bore capstan head complete all as specified and as directed. Make - Cera Code No. F-2002201 or equivalent approved make indicated in list of makes in tender.

S & F in repair wall mount installation type, brass CP hand shower (Health Faucet) 15 mm bore with 1 metre long easy flex tube in chrome finish & wall complete all as specified and as directed. (Make - Jaquar Cat No. ALD-563 or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F stainless steel liquid soap dispenser with glass bottle complete fixed to wall complete complete all as specified. Make- Cera Code No. F-5007111) or equivalent approved make indicated in list of makes in tender.

S & F in repair stainless steel soap dish holder complete fixed to wall complete all as specified and as directed. Make- Cera Code No. F-5006106 or equivalent approved make indicated in list of makes in tender.

S & F in repair stainless steel toilet paper roll holder with flap complete complete all as specified and as directed . Make- Cera Code No. F5006110 or equivalent approved make indicated in list of makes in tender.

S & F in repair Glass Shelf 600mm long complete complete all as specified and as directed . Make- Cera Code No. F5005301 or equivalent approved make indicated in list of makes in tender.

S & F in repair tubular towel rail Brass chromium plated, 20mm dia, D type, 60cm long between flanges of complete all as specified and directed.

S & F in repair Towel Ring brass chromium plated fixed to wall complete all as specified and directed. Make : Cera Bath Fitting Cat No F 5003105 or equivalent approved make indicated in list of makes in tender.

S & F in repair under counter wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling chain and plug waste fitting union and 32mm dia PVC waste pipe 90cm long, all necessary inlet outlet connections complete all as specified and directed. Make : Hindware Cat No. 10065 or equivalent model in Cera /Parryware/ Neycer as approved by GE.

S & F in reapir center hole basin mixer with popup waste system with 450 mm with all connecting accessories complete all as specified and directed by Engineer-in- charge

S & F in reapir brass chromium Angular stop cock (two way) with wall flange of 15mm bore capstan head complete all as specified and directed by Engineer-in-charge. Make - Jaquar or equivalent approved make indicated in list of makes in tender.

M&L in repair coupled closet (Clover) any colour make Cera along with soft close plastic seat cover cistern dual flush complete set complete as specified and directed by Engr-in-Charge.

M & L in repair vitreous china half stall ceramic urinals white of size 720x485x310mm, including, Push Cock grating and waste pipe including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm brass screws, pointing around urinal back in cement, fixing to flushing cistern , flush pipe and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Complete all as specified and as directed by Engr in Charge.

M & L 75 mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement to waste pipe fixed in cement concrete (1:2:4) type B-1 & tested complete, all as specified and directed including taking down floor trap/nahani trap of any description any size.

Dismantling CI/AC/PVC (SWR) pipes of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. Complete all as specified and as directed by Engr in Charge.

S & F 110 mm dia PVC (SWR) pipes,and fittings single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete as specified and directed by Engr-in-Charge.

S & F 110 mm dia PVC (SWR) bends any radius, provided with access door complete as specified and directed by Engr-in-Charge.

S & F PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete as specified and directed by Engr-in-Charge.

S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete as specified and directed by Engr-in-Charge.

S & F 75 mm dia PVC (SWR) bends any radius provided with access door complete as specified and directed by Engr-in-Charge.

S & F PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S & FPVC (SWR) junction single (single T) equal or unequal 75mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S & F15mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe Complete all as specified and as directed by Engr in Charge.

S & F 20mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe complete all as specified and directed complete as specified and directed by Engr-in-Charge.

S & F in repairs bathroom cabinet mirror of hard thermosetting plastic of size 400x500mm, fitted with superior quality distortion free 4mm thick mirror complete as specified and directed by Engr-in-Charge. Make Prayag Cat No. 554

M & L Cutting chases, pinning in for stone, concrete block or slab wall and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed

M & L 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of hole if required over and including 15mm thick screed bed in CM 1:6 etc complete as specified and directed by Engr-in-Charge.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 Complete all as specified and as directed by Engr in Charge.

Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc. 4.00 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), Complete all as specified and as directed by Engr in Charge.

M & L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base of floors 75mm thick Complete all as specified and as directed by Engr in Charge.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shade as decided by Engineer-in-Charge, over and including 50 mm thick crushed stone dust etc. compete all as specified and directed by Engr - in - Charge.

M&L sand filling under floors or in foundation including watering as required. Complete all as specified and as directed by Engr in Charge.

M& L For complete removal of exisiting treatment of old surface of wall and applying two coats of distemper oil emulsion over and including 3 mm wall care putty and a coat of priming with alkali resistant primer etc. complete all as specified and as directed by Engr- in - Charge.

M& L For complete removal of exisiting treatment of old surface of wall and applying two coats of anti fungal weather proof paint over and including a coat of primer etc. complete all as specified and as directed by Engr - in - Charge.

M& L For complete removal of exisiting treatment of old surface of ceiling and applying three coats of white wash etc. complete all as specified and as directed by Engr in Charge.

M&L For complete removal of exisiting treatment of old wooden surface and applying two coats of synthetic enamel paint, over and including pink primer etc. complete all as specified and as directed by Engr - in - Charge.

M&L For complete removal exisiting treatment of old steel surface and applying two coats of synthetic enamel paint, over and including red oxide primer etc. complete all as specified and as directed by Engr - in - Charge.

M & L for french polishing on surface of any description width or girth including cleaning and preparing the surfacve including a coat of wood filler on one or more coats on old work complete all as specified and as directed by Engr in Charge.

S & F in repair for 12mm thick veneered decorative plywood grae-I (BWR) with decorative face veneers on one face fixed with screws to timber frame work etc complete all as specified and as directed by Engr in Charge.

M & L for preparation of wooden surfaces an applying two or more coat of french polishing and under and including a coat of wood filler etc complete all as specified and as directed by Engr in Charge.

S & F in repair plain fillets bull nosed/squared/ chamfered or rounded on edge exceeding 6.00 but not edceeding 13 Sqcm of second class hard wood etc complete all as specified and as directed by Engr in Charge.

M & L for second class hard wood scantlings clean swan timber framed and fixe of size 40 x 65mm including ismantling of existing Scantling etc complete all as specified and as directed by Engr in Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc. complete all as specified and as directed by Engr in Charge.

M&L Point wiring any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, (FR) ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally, covered with plastic laminated sheet suitable for switches, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified for the following:-

(a) One light point controlled by one switch

(b) One fan/exhaust fan point controlled by one switch and regulator

(c) Socket outlet, three pin, 5 Amp, independent

(d) Socket outlet, three pin 5 Amps on the same board

All as per Item No 62 above but ,with stranded copper conductor 2.5 Sq. mm (nominal area), including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. complete all as specified and as directed by Engr in Charge.

S&F Ceiling rose, surface Bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified and as directed by Engr in Charge.

S&F Modular Switch one way and 6 Amp, 1 module, 230 volt complete all as specified and as directed by Engr in Charge.

S&F Modular Switch one way and 16 Amp, 1 module, 230 volt complete all as specified and as directed by Engr in Charge.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 16 Amp, combined 2 module complete all as specified and as directed by Engr in Charge.

Taking down celing fan of any size after disconnecting the wire from existing ceiling rose and deposited to MES Store (AGE E/M sub divn) and Supply and fixing ceiling fans complete with blades, down rods, Modular regulator and accessories 230 V , 1200mm sweep. Min air delivery 210 CFM with serice value 6.00 BEE. five star rated with brushless directed current motor (BLDC)

M&L for taking down existingtube light fitting 36/40 watt and supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaires, high efficiency diffuser for soft glare free light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. Make- Cat Part No DURALINEARNEOBS20WLED865SPCWH of Havells or equivalent model in Wipro/HPL/Philips as approved by GE

S&F Energy Saving recess mounted luminaries High translucent defuser gives soft glare free light 36W Suitable for 600mm x 600mm Modular/POP/Gypsum ceiling 5700 K complete all as specified and as directed by Engr in Charge. Make Crompton cat part No LCPL-36- CDL or equivalent in Havells/Philips.

S&F wall mounting fan (air circulator) single phase oscillating type 450mm sweep 230 volts complete all as specified and as directed by Engr in Charge.

S&F exhaust fan AC single phase 230/ 240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers and all fixing arrangements such as plywood 18mm thick of suitable size complete all as specified and as directed by Engr in Charge.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt complete all as specified and as directed by Engr in Charge.

S&L for Sub main wiring with approved colour coding as per IS with Four single core PVC insulated cable with stranded copper conductor of size 10 Sq. mm nominal area and drawing into PVC non metallic PVC conduit including PVC insulated 10 Sqmm (nominal area) stranded copper conductor earth wire complete all as specified and as directed by Engr in Charge. NOTE : Four runs of 10 sqmm cable, one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit

S&F Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 06 Sq. mm nominal area and drawing into PVC non metallic PVC conduit including PVC insulated 06 Sqmm (nominal area) stranded copper conductor earth wire complete all as specified and as directed by Engr in Charge. NOTE : Two runs of 06 sqmm cable, one run of 06 sqmm cable and one run of PVC casing caping will be measured as one unit

S&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 04 Sq. mm nominal area and drawing , in PVC Casing caping including PVC insulated 4 Sqmm (nominal area) stranded copper conductor earth wire complete all as specified and as directed by Engr in Charge. NOTE: - Two runs of 04 sqmm cable,one run of 04 sqmm cable and one run PVC Casing caping will be measured as one unit

S&F Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 2.5 Sq. mm nominal area and drawing , in PVC Casing caping including PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor earth wire complete all as specified and as directed by Engr in Charge. NOTE: - Two runs of 2.5 sqmm cable,one run of 2.5 sqmm cable and one run PVC Casing caping will be measured as one unit

S&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 1.5 Sq. mm nominal area and drawing , in PVC casing caping including PVC insulated 1 Sqmm (nominal area) stranded copper conductor earth wirecomplete all as specified and as directed by Engr in Charge. NOTE: - Two runs of 1.5 sqmm cable,one run of 1.5 sqmm cable and one run PVC Casing caping will be measured as one unit

S&F 4 way VTPN DB-double door, MCCB 125A with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 54 protection complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed by Engineer-in-charge. Make - Indoasian /Schneider/Siemens

S&F MCCB 125 Amp 4 Pole, 415 Volts, 50HZ, 25 KA complete all as specified and as directed by Engr in Charge.

M&L for MCCB 4 pole, 160 Amps, 415 V, 36 kA thermal magnetic release adjustable type complete all as specified and as directed by Engr in Charge. Make : Indoasian/L&T/Legrand/Havells

Supply & fix DB 12 way SPN with 200 amps rated bus bar, double door complete all as specified and as directed by Engr in Charge.

Supply & fix DB 8 way SPN with 200 amps rated bus bar, double door complete all as specified and as directed by Engr in Charge.

S&F of MCB Single pole and neutral rating capacity 40 to 63 Amp, 240 V breaking capacity 10KA C series

S&F of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 9KA C series complete all as specified and as directed by Engr in Charge.

M&L for earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth of not less than 1.50 metre below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. complete all as specified and as directed by Engr in Charge.

GGS Infra

vishalconstruction

M/S J J ENTERPRISES

UNIQUE ENGINEERS

OM INFRA

KARPE AND SONS CONSTRUCTION

M/s MM TRADERS