Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.0 L+₹48,282 (1.58%)Rejected-Finance RAILWAY COLONY NOWGAM SRINAGAR JAMMU AND KASHMIR 190015 | BUDGAM | JAMMU AND KASHMIR | 190015 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹36.1 L+₹5.6 L (18.3%)Rejected-Finance | L3 | Rejected-Finance Not being L1 |
Tender Value
₹28.5 L
EMD Value
₹57,057
Closing Date
16 Oct 2023, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS
SPL REPAIR TO ROAD FROM 104 INF BDE REAR GATE TO BHAWANI DUTT GATE UNDER STN HQ CHOWKIBAL AND JCOS MESS TO 4 SIKH LOC UNDER STN HQ TREHGAM UNDER GE 874 EWS.
2023_MES_618321_1
CWEK-37/2023-24
Open Tender
Civil Works - Roads
Item Rate
270 days
GE 874 EWS
Class E Category a v
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹57,057
HQ 133 WORKS ENGRS
28 Dec 2023
12 Sept 2023
24 Oct 2023
12 Sept 2023
16 Oct 2023
27 Sept 2023
12 Sept 2023 - 22 Sept 2023
23 Sept 2023
Amount
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sq m and putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, binded with 0.09 cu m of stone chippings, 6.3 mm size for depth of potholes exc 30 mm and again well rammed and sealed with premixed sand seal coat (including supply of premixed macadam, binder and chippings) rolled and compacted to required camber and gradient with 8 to 12 tonne power roller, complete all as specified and directed.
Material and labour for preparation of old black top road surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc, complete all as specified and as directed .
Material and labour for laying bituminous premix semi dense asphaltic concrete 30mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 8 to 12 tonne capacity power road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 3Kg/10 Sqm on existing black top for below bituminous macadam surfaces incl preparation complete all as specified.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 5Kg/10 Sqm on existing black top for below bituminous macadam surfaces incl preparation complete all as specified.
Material and Labour for premixed bituminous macadam (consolidated thickness 75mm or less ) laid / rolled and compacted to required gradient and camber and gradiant using mechanical paver and rolled with 8 to 12 Tonne capacity power road roller to uniform smooth surface using binder content of 4% by weight of total mix using paving bitumen of grade (VG-30) complete all as specified and as directed Note- (i) Bituminous macadam shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
M & L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sq m in area not exc400 sqm, Exc 50 mm and n exc 100 mm deep, complete all as specified and as directed.
M & L for 75 cm thick (compacted thickness) of WBM with coarse aggregates of grading 2 (63 to 40 mm size ), spread, rolled and consolidated to camber required, Type of aggregate lime stone, sand stone , complete all as specified and as directed.
All per Ser item No 10 here-in-before but except material and in one layter of 7.5 cm thick (Consolidated thickness), complete all as specified and as directed.
Demolition of cement concrete in ground floor and paving n exc 15 cm thcikness (below and above GL) unreinforced complete all as specified and directed.
M & L for continuous brick edging with burnt clay bricks of sub class 'B' old size bricks with width equal to the width of brick, laid dry on end vertically complete all as specified and as directed by Engineer -in-Charge.
M&L for 150mm thick cement concrete type D-2, 1:4:8 (40mm graded agrregate) as in sub base of floors for PCC path, finished even and fair over well/rammed/compacted earth,complete all as specified and as directed by Engineer -in-Charge.
M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and directed.
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory ompaction by using plate vibrator, filling he joints with fine sand and cutting of paver block as per required size and attern, finishing and sweeping extra sand complet ,complete all as specified and as directed by Engineer -in-Charge.
Material and labour for preparation of new/old road surfaces including cleaning of all dirt, scales, oil, grease and foreign material etc and applying 2.5mm thick retro-reflective thermo plastic road marking paint of approved brand (white or Yellow) including admixture layer of glass beads, exc 10 cm width or girth applied hot on road surface mechanically, conforming to BS-6088 and according to the specification laid down by IRC and MOST (Ministry of surface transport) specification 803 Vol -III, by using automatic mechanical road marking machine complete all as specified and as directed.
AHMED CONSTRUCTIONS AND INFRA PVT LTD
SHALIMAR BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .