REPAIR AND MAINT OF FLOOD LIGHTS, FACADE LIGHT, FOUNTAIN LIGHTS AND FOUNTAIN PUMP MOTORS AT DRONACHAL BHOPAL

Amount

Taking down the existing unserviceble U/G cable from the trench including tracing out the fault with the help of megger and seprate the serviceable and unservicable cable relaying the serviceble cable after rectifying the defects. Note:-(i) Excavation / Earth work , sand & Brick shall be measured and paid seprate under relavent items. (ii) Retrived bricks from site properly staked and reused as protection to U/G cable. (iii)Straight through joint shall be measured and paid seprate under relevent item of schedule. (iv) New cable shall be used if required at site examine and paid seperately under respective items.

Relaying the serviceable cable obtained from item No 1.00

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc.and getting out for hard/ dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm for Hard/dense soil complete all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Relaying of reusable bricks taken from item ser No 1.00

Supply and spread dry river sand for UG cable cushioning including punning on top and bottom of the cable complete all as specified and directed by Eng-in-Charge.

M&L for tubes light grade galvanised for following sizes with all fittings and fixed to wall/ pole / under road / culvert / drain or laid in floors,complete incl taking the corroded all as specified and directed.

40 mm dia

50 mm dia

Supply & fix heat shrinkable type straight through cable joint kit for 1.1 KV grade cable complete with jointing material and accessories suitable for following dia/ size complete all as specified and directed by Eng-in-Charge. Note : (i)The suitable excavation shall done by the contractor for making the cable jointing kit and make the cable functional. (ii) Excavation, returning filling and remvoning shall be measured and paid seperately under the relevant items.

10 Sqmm to 25 Sqmm Sqmm 2 Core

10 Sqmm to 16 Sqmm 3.5/4 core

25 Sqmm to 35 Sqmm 3.5/4 core

M&L for PCC in roof kerb or mud stops, rounded or chemfered on edges type C1 1:3:6 ( 20mm graded aggregate) complete all as directed.( For pole coping and road cutting) complete all as specified and directed by Eng-in-Charge.

M&L for cutting of bituminous road/ floor for laying of pipe/cables n. exc 1.5m wide and n. exc 1.5m deep including refilling with material and watering Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed. Note-PCC shall measured and paid separately.

Taking out short circuited / burnt out existing aluminium wire and supply & replace weather proof PVC insulated multi stranded copper conductor 1.5 Sqmm flat / round,three core 1100 volts grade complete all as specified and directed.

M& L for MS flat iron for fabricating of clamp of various size as required at site for mounting/fixing of brackets and junction box on pole complete all as specified and directed by Eng-in-Charge.

Supplying, Laying & Jointing of XLPE cable 1100 volts grade armoured of following sizes with Aluminium Conductor stranded including necessary connection complete with lugs, glands all as specified and directed (Excavation, earth work, returning filling, sand cushioning, brick protection to be measured and paid separately).

(a) Cross sectional area 50 Sqm 3.5 Core.

(b) Cross sectional area 35 Sqm 3.5 Core.

(c) Cross sectional area 25 Sqm 4 Core.

(d) Cross sectional area 16 Sqm 4 Core.

(e) Cross sectional area 10 Sqm 4 Core.

(f) Cross sectional area 10 Sqm 2 Core.

S&F Fountain light fitting IP 68 with High light intensity empowered color changing & monochromatic LED under water fountain light with polarized light design & intelligent logarithmic control technology alongwith external drivers. Make Havells or equivalent in Philips/wipro

Supply & replace street light of size 300 x200 x105 mm inner dimension made out of FRP sheet with weather proof hinged doors, locking arrangements horizontal / vertical operated with 6 amps MCB SP, along with provision of PVC/polycarbonate connectors of suitable size and capacity of 40 Amps and mounting on 25mm x3mm MS flat iron clamps duly painted with two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed including dismantling of existing unserviceble box. Make of Box Sintex/Hensel or equivalent Note : MS clamp shall be measured and paid seperately under relevant item

Supply and fix Energy saving flood light fitting made out of die cast aluminium high power LED flood light fitting IP 65 of 100 W capacity Make Havells or equivalent in Philips/wipro

Supply and install Submersible pump set DOL starter suitable for 5 HP motor all as per Havells cat No. IHHDOLLA*E including provision of weather proof M.S box of 3 mm thick with locking arrangement to be mounted on Brick pedestal with MS angle 40 x6mm , 1.5m above ground level. Make : Havells /L&T/BCH

Supply and lowering three core flat PVC cables with bare bunched copper conductor insulated and sheathed with PVC for Submersible pump motors with voltage grade Upto 1100 Volts of size 3 core 4 Sqmm confirming to IS 692-1990 Make : Finolex /Havells/ Kalinga with ISI marked

M&L for rewinding of fountain motor upto 5 HP capacity by removing old unserviceable copper winding clearing of slots and rewinding of motor with same gauge and No of turn of copper coil as per existing/ obtained from old winding and assembling including replacement of bearing, minor parts likes nut/bolt/washer/gasket/bushes bearing , mechanical/oil seal , necessary welding etc complete all as specified and directed. Note : quoted rate included for dismantling transportation and refixing at the origoinal site after rewinding

PRADEEP TIWARI CONTRACTOR

HRK ENGINEERING CORPORATION

MODI CORPORATION

SHOURYA ENGINEERING ENTERPRISES

ELITE WORKS

UMESH ENTERPRISES