CONSTRUCTION OF SERVICE ROAD BOTH SIDE AT RAIL OVER BRIDGE ON LEVEL XING NO 26B LUCKNOW RAIBAREILLY PRAYAGRAJ RAIL SECTION KUNDA BYPASS IN DISTT PRATAPGARH

Excavation for roadway in soil using manual means including loading in truch for carrying of cut earth to embanhment site with all lilfts and lead upto 1000 metres.

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired dens

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification includinig premising the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with pave

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects