Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹11.7 L+₹70,000 (6.38%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹12.2 L+₹1.2 L (11.2%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SARATHI ENTERPRISE L3 | ROY ENTERPRISE L2 | BIPLOB SARKAR L1 |
|---|---|---|---|---|---|---|
| 1.00Repairing work of existing workshop shed 60M x 15M required to improve safety, protect from rain / wind, dust, moisture etc. | ||||||
| 1.10Repairing of Sheet Roofing/Cladding work for existing workshop shed 60M x 15M | ||||||
| 1.11 | Providing and fixing corrugated G.S. sheet roofing/cladding including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), including cutting to size and shape whatever required. | 83.63 | Sqm | 1,991 ₹1,66,507.33 Lowest | 1,991 ₹1,66,507.33 Lowest | 1,991 ₹1,66,507.33 Lowest |
| 1.12 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete: - Ridges plain (500-600 mm) | 63 | Mtr | 279 ₹17,577 Lowest | 279 ₹17,577 Lowest | 279 ₹17,577 Lowest |
| 1.13 | Providing and fixing GI Gutter 22G with iron brackets 40 x 3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. | 126 | Mtr | 543 ₹68,418 Lowest | 543 ₹68,418 Lowest | 543 ₹68,418 Lowest |
| 1.14 | Providing flat iron brackets 50 x 3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins. | 70.06 | Mtr | 385 ₹26,973.1 Lowest | 385 ₹26,973.1 Lowest | 385 ₹26,973.1 Lowest |
| 1.15 | Labour charges for CGI sheet fixing rate is inclusive of necessary stitch bolt and washer and other necessary fittings. All tools and tackles will be supplied by Agency. - For Side Wall Cladding | 390.75 | Sqm | 71 ₹27,743.04 Lowest | 71 ₹27,743.04 Lowest | 71 ₹27,743.04 Lowest |
| 1.16 | Supply and fixing PVC corrugated Sheet with MTC - (SIZE 2'-8" x 8'-0", 0.5 mm thickness) PVC corrugated sheet. | 30 | Sqm | 878 ₹26,340 Lowest | 878 ₹26,340 Lowest | 878 ₹26,340 Lowest |
| 1.20Repairing of rain water spout and pipe for existing workshop shed 60M x 15M | ||||||
| 1.21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. - 110 mm diameter. | 120 | Mtr | 8 ₹960 Lowest | 8 ₹960 Lowest | 8 ₹960 Lowest |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
8 Sept 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CM (P)
27, R N MUKHERJEE ROAD KOLKATA 01
REPAIRING OF EXISTING WORKSHOP SHED AND FOUNDATION WORK FOR CNC CUTTING MACHINE AND CNC DRILLING MACHINE AT HEAVY PLANT YARD KOLKATA
2025_BBJC_875374_1
eNIT/EPE/RDSO REGN/T-13-2025
Open Tender
Civil Works
Works
45 days
BBJ
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹25,000
20 Sept 2025
30 Aug 2025
9 Sept 2025
30 Aug 2025
8 Sept 2025
1 Sept 2025
Amount
Repairing work of existing workshop shed 60M x 15M required to improve safety, protect from rain / wind, dust, moisture etc.
Repairing of Sheet Roofing/Cladding work for existing workshop shed 60M x 15M
Providing and fixing corrugated G.S. sheet roofing/cladding including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), including cutting to size and shape whatever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete: - Ridges plain (500-600 mm)
Providing and fixing GI Gutter 22G with iron brackets 40 x 3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
Providing flat iron brackets 50 x 3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins.
Labour charges for CGI sheet fixing rate is inclusive of necessary stitch bolt and washer and other necessary fittings. All tools and tackles will be supplied by Agency. - For Side Wall Cladding
Supply and fixing PVC corrugated Sheet with MTC - (SIZE 2'-8" x 8'-0", 0.5 mm thickness) PVC corrugated sheet.
Repairing of rain water spout and pipe for existing workshop shed 60M x 15M
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. - 110 mm diameter.
Providing and fixing on wall face unplasticised Rigid PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. - 110 mm Shoe.
Providing and fixing on wall face unplasticised Rigid PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. - MS HOLDING CLAMP FOR WATER PIPE (FLAT 50 x 6) [As per sketch attached]
Miscellaneous works
Labour charges for painting of all structural members with one coat Zinc Chromate Primer and one coat Aluminium Paint of exsisting fabrication shed 60M x 15 M [ All paints supplied by BBJ]
Labour charges for Dismantling roofing/Cladding including ridges, hips, valley and gutters etc. and stacking the material within 50 m lead of: CGI Sheet
Foundation Work for CNC Cutting Machine (Gas / Plasma) at HPY
Concrete work
Providing and laying in position cement concrete of specified grade 1:1.5:3 [ 1 Cement : 1.5 Coarse Sand (zone III) derived from natural sources : 3 graded Stone aggreegate 20 mm nominal size derived from natural sources] excluding the cost of centering and shuttering- All work up to pinth level
Providing and laying in position cement concrete of specified grade 1:4:8 [ 1 Cement : 4 Coarse Sand (zone III) derived from natural sources : 8 graded Stone aggreegate 40 mm nominal size derived from natural sources] excluding the cost of centering and shuttering- All work up to pinth level
Reinforced Cement Concrete
Centering and shuttering including strutting, propping etc. and removal of form for- Foundations, footings, bases of columns etc. for mass concrete.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.- Thermo-Mechanically Treated bars of grade Fe-500D or more.
Foundation work for CNC Drilling Machine
Earthwork
Earthwork in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavation earth up to 50 mm and lift upto 1.5 m, as directed by Engineer - in - Charge.- All kinds of soil
Concrete work
Providing and laying in position cement concrete of specified grade 1:1.5:3 [ 1 Cement : 1.5 Coarse Sand (zone III) derived from natural sources : 3 graded Stone aggreegate 20 mm nominal size derived from natural sources] excluding the cost of centering and shuttering- All work up to pinth level
Providing and laying in position cement concrete of specified grade 1:4:8 [ 1 Cement : 4 Coarse Sand (zone III) derived from natural sources : 8 graded Stone aggreegate 40 mm nominal size derived from natural sources] excluding the cost of centering and shuttering- All work up to pinth level
Reinforced Cement Concrete
Centering and shuttering including strutting, propping etc. and removal of form for- Foundations, footings, bases of columns etc. for mass concrete.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.- Thermo-Mechanically Treated bars of grade Fe-500D or more.
ELECTRICAL WORK
Supply of one DB PANEL 200A TPN Incoming & 4 Nos. 63A TPN outgoing (Panel size 1675 mm (H) x 1050mm (W) x 400 mm (D) approx. with L&T make MCCB & Lamp complete with Volt meter and Ammeter, C.T., fabrication , Powder coated painting including Switch Gear, Al. Busbar, Insulator & internal wiring, CU. Wire & Socket, fittings, wiring etc. complete set protection IP55 for power dritribution to CNC Cutting Machine and CNC Drilling Machine and others.
Installation of 6 Nos Earth pits of size -10ft Depth and 3FT (max.) from above GL for CNC Machineries and lightening Arresters.
Supply and fixing of Lightening Arresters with fittings.
Supply and normal Horizontal laying of G.I. Strip for Lightening Arresters.
Supply and Vertical laying of G.I. Strip for Lightening Arresters.
ROY ENTERPRISE (BID ID -3279214)
SARATHI ENTERPRISE (BID ID -3279055)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .