Augmentation of sub station Bichpuri, Dura, Kagarol, NAGLA KAMAL, Kukthala in distt. Agra

Amount

SUB-STATION PART:- 33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33/11 KV Transformer 10 MVA

33/11 KV Transformer 20 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV CT 200/100/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

11 KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11 KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

33 KV Post Insulator

Structure for Post Insulator with Plinth & Foundation

Structure for Lightening Arrestors with Plinth & Foundation

90 Lbs. Rail pieces for T/F

CT Steel structure with Plinth & Foundation

Structure for P T with Plinth & Foundation

24 V Battery with Battery Charger and Cabinet.

Control cable:- (i) 4 × 2.5 Sq.mm.

(ii) 2 × 2.5 Sq.mm.

(ii) Indoor Equipment (Earth Mat)

Water level Pipe Earthing for Power T/F

Chemical Pipe Earthing

Alluminium Paint for painting of Sub-Station Structure & equipment.

Red Oxide Paint for painting of Sub-Station Structure & equipment.

Plinth and Foundation of 10 MVA T/F

Plinth & Foundation of 33 KV VCB

Copper flat 2500x75x20 mm (L.S.)

11 KV Cable laying Including cost of sand and Bricks

11 KV LINE PART:- 11 Mtr. long S.T.P., SP-70 Pole.

13 Mtr. long S.T.P., SP-70 Pole.

‘V’ Type Cross Arm for 11 KV

11 KV XLPE Cable 3 x 185 Sq mm

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

11 KV Pin Insulator

11 KV Pin with N&B

Earthing complete

11 KV Disc Insulators T&C Type 4500 Kg.

11 KV Disc fittings T&C Type 4500 Kg.

Stay set Complete for 11 KV line

Grouting of stay rods 1800 x 20 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming.

A.C.S.R. DOG CONDUCTOR

Stone Pad 300x300x75 mm

Cross Arm Holding Clamp with packing piece, Nut & Bolts for PCC Pole

‘F’ Bracket with Nut & Bolts

Barbed wire

The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. i) 11 Mtr. Long SP-55 poles

ii) 13 Mtr. Long SP-72 poles

Alluminium Binding wire ( 5 mm dia )

Painting number mark with Paint

11 KV Danger Board with clamp & bolts

Alluminium Paint

Red Oxide

M.S. Angle 65x65x6x2700 mm Bracing Set with 4 Nos.Clamps.

Top Channel 100x50x2240 mm.

Clamps for Top Channel with Nut & Bolts

P.G. Clamp for Weasel Conductor

‘E’ Bracket for 11 KV with Nut & Bolts

T' OFF M.S. Channel 100 x 50 x 1300 mm. ( 1.3 m @ 9.56 M / Kg. = 12.428 Kg. )

M.S. Gaurding Angle 65x65x6x2300 mm

M.S. Gaurding Angle 65x65x6x3800 mm

M.S. Angle holding clamp with nuts and bolts

Eye Bolts

G.I. wire 6 SWG

G.I. wire 8 SWG

Binding wire

Turn Buckle

Connecting Clamps

Dropper Channel 100×50×2028 mm

M.S. Angle 65x65x6 mm,2028 mm. long for G.I. Pipe supporting @ 5.8 Kg/M

11KV TPMO Set. with fixing clamp complete

11 KV Fuse Set with Fixing clamp complete

M.S. Nut & Bolt with Warshers

HDPE Pipe 160 mm O/D PN-6, PE-100 Grade UV Stabalized for laying at Double Pole Structure to proposed Double Pole Structure

Cable Marker

Wooden Bushes

G.I. Pipe 160 mm Dia for Double Pole Structure

Clamps for Fixing Cable & Cable Box

Clamps for holding of G.I. Pipe 160 mm

11 KV Cable Under Ground Work :- Digging of Trench by excavation of earth laying of brick to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables in loop of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below by HDD Method along with laying of 11 KV 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches including cost of bricks, & sand,.

Laying of 11 KV 3x185 XLPE Cable in G.I. Pipe on Double Pole Structure

Laying of 11 KV 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Choping of branches of Tree

Road restoration charges for Kachhcha / footpath side

33 KV Control Panel Shifting & 10 MVA Transformer Dismental & Uninstall from Plinth to safe side at BICHPURI Sub-Station

Dismental & Uninstallation Charges of 1x3 MVA from Plinth to safe at DURA Sub-Station

Dismental & Uninstalling Charges of 1x5 MVA TF from Plinth to Safe Place at KAGROL Sub-Station

Dismental & Uninstalling Charges of 1x5 MVA TF from Plinth to Safe Place at NAGLA KAMAL Sub-Station

Dismental & Uninstalling Charges of 1x5 MVA TF from Plinth to Safe Place at KUKTHALA Sub-Station

Carriage of following material from Center Store to Site SUB-STATION PART:- 33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33/11 KV Transformer 10 MVA

33/11 KV Transformer 20 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV CT 200/100/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11 KV LINE PART:- 11 Mtr. long S.T.P., SP-70 Pole.

13 Mtr. long S.T.P., SP-70 Pole.

‘V’ Type Cross Arm for 11 KV

11 KV XLPE Cable 3 x 185 Sq mm

11KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

PREMIER ENGINEERING COMPANY

SHIVAM ENTERPRISES