SPECIAL REPAIR OF BUILDING NO. P-369 (GROUP PLG ROOM) GTO GROUND OF SSB AT SCE UNDER GE (WEST) PRAYAGRAJ.

Amount

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on faces of brick work or concrete surfaces CM 1:3, as in ceiling, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces and appllyng two or more coats of 100% premium acrylic emulsion paint of approved colour on external wall surfaces, with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat complete all as specified and directed.

M&L for complete removal of old painted surfaces , preparation of old surfaces and appllyng two or more coats of 100% premium acrylic emulsion paint of approved colour on external wall surfaces, with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat complete all as specified and directed.

Complete removal of old treated surface of ceiling & applying two coat of OBD paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling & applying two coat of OBD paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of plastic emulsion pant over one coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats plastic emultion paint over one coat of primer complete all as specified and as directed..

M&L for 1 to 2mm thick wall care putty on new/ old surface of wall/ ceiling complete all as specified and as directed..

Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without takig off shutters from the frames) complete all as specified and directed.

Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, and wall panneling any thickness, including cover fiilets complete all as specified and directed.

S&F suspended fully perforated 12mm thick gypsum board false ceiling with "E" grid suspended ceiling grid system of grid size 600mm x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Ditto as item No 17 above but fixing only complete all as specified and directed.

M&L for factory made uPVC white color sliding window three track made of extruded profiles with wall, thickness of profiles not less than 2.3mm with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm) interlock (One vertical length in each shutters 45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2mm +/- 0.2 mm thick galvanised steel frame (30mm x 18mm) of 2 Nos, sliding sash (30mm x18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners hardware touch lock of zinc alloyed (white powder coated) steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories and 5.0 mm thick coloured glass pans complete all as specified and directed.

M&L powder coated anodised aluminium grill wt n exc 5.60 Kg per sqm with all fittings & fixture and including stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and cover with aluminium frame around the edges of aluminiam grills complete all as specified & directed.

M&L for factory made uPVC white colour openable door made of extruded profiles with wall, thickness of profiles not less than 2.3mm with hollow section with multi chamber and required accessories and 5.0 mm thick toughened glass, foor spring complete all as specified and directed.

Providing and fixing in position wall panelling at all heights with GRG (Glass fibre Reinforced Gypsum) panels/tiles of size 595mm x 595 mm of approved texture, design and patterns BIS-compliant GRG Tiles conforming to IS : 2095 Part 3,2022 having moisture content less than 022%, humidity resistance of 99%, in RC 0.072 to 0.85 as per IS : 8225 : 1987, Non combustible as per BS 476 (Part 4 )-1970 and light reflectance of 90 % (Minimum), comprising of a frame made from specially fabricated Galvanized mild steel sheet 0.50 mm thick pressed section (Galvanizing @120 gm/Sqm including both sides), i.e vertical studs of size 48x34x36 mm ar e placed at 600mm centre to centre in a floor and ceiling channnel section of size 50x32 mm fixed to the floor and soffit and 600 mm centres using 12 mm dia x 50 mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is to be fixed in horizontal direction at 600mm centre to centre so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum). Non combustible panel /tiles are to be screw fixed with self taping pan head nickle coated mild steel screws of size 13 x3.2 mm on to this grade living an even groove of 1mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fibre joint tape roll 50 mm wide (90 meter) roll and two coats of primer suitable for panelling as per manufacturers specification as per directed

Ditto as item No 22 above but fixing only complete all as specified and directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified.

M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & botttom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and including of 03 Nos SS hinges, 2 nos aluminium bow handle 150mm and 2nos aluminium tower bolt of size 150mm etc complete all as specified and directed.

S&F in stainless steel harrison rails/ curtain rod fancy type 25 mm dia including bracket, stops, rollers etc complete all as specified and directed complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed.

M&L for vetrified ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for 18 to 20 mm thick granite stone for any type of work in steps, jambs, wall clading, window sill, pillars, cooking platform and like in & including cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F for 25 to 30mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.

M&L for glazed ceramic projection wall clading tiles of approved colours in vertical surface 600x200 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles fixed over & including 10mm thick plaster in CM 1:4, complete all as specified and directed.

M&L for mangalore pattern projection tiles of approved colours in vertical surface or roof surfaces of approved size set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles complete all as specified and directed.

M&L in Machine cut Plolished kota stone slab flooring 18-20mm laid thick over cement screed base jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab with & including 15mm thick screed bed in CM 1:6 and rubbing & polishing, complete all as specified and directed.

M&L in Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed jointed & pointed with grey cement slurry mixed with pigment to match the shade of slab with & including 10mm thick screed bed in CM 1:3 and rubbing & polishing complete all as specified and directed.

M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.

Taiking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for GI tubing 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for GI tubing 20 mm bore 'medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing 15mm bore pipe and connection in new or old portion (wall, celing etc) with & including provn of new fittings, complete all as specified and directed.

Refixing of GI tubing 20 mm bore any grade galvanised, with all new fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs Viterous China water closet squatting pan, 'Orrisa' pattern, size 580mm x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor complete all as specified and directed.

S&F in repairs counter top wash basin, Vitreous China white oval type of size 560x470mmx190mm including 32mm bore Chromium plated waste fitting complete all as specified

S&F in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms) complete all as specified and directed.

S&F in repair brass chromium plated soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed.

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed.

S&F 75mm bore stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F 100mm bore stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) branch piece double (double Y) equal or unequal provided with access door 110mm complete all as specified and directed.

S&F PVC (SWR) branch piece double (double Y) equal or unequal provided with access door 75 mm complete all specified.

S&F 75mm dia outlet PVC (SWR) floor trap, plain with granting including jointing with solvent cement complete all specified and directed.

S&F vent cowl for 75 mm bore pipe complete all as specified and directed.

S&F vent cowl for 110 mm bore pipe complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated fancy type angle cock with crutch or butterfly handle screwed both end of 15 mm bore complete all as specified and directed.

S&F in repairs gun-metal gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs fancy type, chromium plated bib taps, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

Dismantling water tanks capacity exc 250 but n. exc 500 Ltrs complete all as specified and directed.

S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F Ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe 20 mm bore or brass ferrule and fixed complete all as specified and directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and other similar work complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone agg ) as in OHT platform, haunching for manhole, over Chajja, cills and other similar work complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above GL) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, beams, staircase, lintels, chajja, RCC OHT etc complete all as specified and directed.

M&L reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, copies, deck slabs and in shelves complete all as specified and directed.

Use and waste of form work (flat) to rough finished surface sides and soffits of floor and roof beams, cantilevers, shelves etc complete all specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for cement concrete type B0, 25 mm thick (1:2:4) using 12.5 mm graded crushed stone aggregate as in floors finishes (levelling course) even and smooth with using extra cement complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer bedded in cement mortar on roof complete all as specified and directed.

Demolition of cement concrete in roof including plastering and leeping including cleaning surface of roof with wire brush / mechanical brush throughly to remove old dirt / loose particles to expose clean concrete slab clean with watering etc complete all as specified and directed.

M&L for cutting out cracks to V section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry in 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50mm graded crushed stone agg with mixing of WPC as in padding to maintain proper slope as required complete all as specified and directed. Note:- WPC shall be measured and paid separatly.

M&L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumen painting with hot blown grade bitumen 85/25 @ 1.20 Kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric ( wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerb / benching in radius 10 cm with waterproofing compound as per manufacturer's instructions complete all as specified and directed. Note:- WPC shall be measured & paid separatly.

M&L 40mm thick brick tiles laid on cement mortar and jointed flush in cement mortar 1:3 with & including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per Ser No. 92 above but except brick tiles.

S&F PTMT grating doom square 150mm size (minimum wt 100 gms) complete all as specified and directed.

S&F PTMT grating doom square 150mm size (minimum wt 100 gms) with waste hole complete all as specified and directed.

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

M&L for point wiring with concealed in wall 2.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 2.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit complete all as specified and directed. Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. 3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

All as per item No. 100 here-in- before but for 3 pin 5 Amps switch socket on independent board with 2.5 sq mm copper cable complete all as specified and directed.

All as per item No. 100 here-in- before but for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed.

All as per item No. 100 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

All as per item No. 100 here - in - before but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

S&F modular switch 1 way, 6 amps, 230V AC, 01 module complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch 01 way type 16 amps, 230V AC single pole 01 module complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F modular switch 2 way, 6 amps, 230V AC, 01 module complete all as specified & directed.

S&F ceiling rose surface backelite three terminals complete all as specified and directed.

S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture 20W, 120 lumen per watt (inverter type ) 4' long batten with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps complete all as specified and directed.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet (inverter type ) long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

Supply and fixing and replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F on wall building security light luminaire for 1x35 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one complete all as specified and directed.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan and deposite to MES yard complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers including antidust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc of appropriate size complete all as specified and directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 4 pole MCCB 160Amp 25 KA - 01 fixed type Nos and SP MCB 63 Amps 'C' curve 10 KA - 12 Nos outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified and directed.( for AC)

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP&N 8 ways ,220 volts complete all as specified and directed. Note:- MCB/ shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 4.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 4.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I complete all as specified and all as directed. (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core complete all as specified and all as directed. Note: - 1. Excavation and earth work will be measured and paid seperately.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and all as directed.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and all as directed.

Channa Brothers and Co. (BID ID -3432569)

M/S CHANDRIKA PRASAD AND SONS (BID ID -3432096)

Z N Enterprises (BID ID -3438650)

Friends fire Engineers (BID ID -3438709)