Up-gradation of CHC to 50 bedded Hospital at Taraori Distt. Karnal (Pdg. EI only).

Amount

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. Triple pole switch with neutral link 32 amp. 415 Volts. HSR 31.12(a) (xiv) Cat-B

Triple pole switch with neutral link 63 amp. 415 Volts. 31.12 (a) (xv) Cat-B

HSR 31.12 (c) (i) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

250 amp. 415 V , 35 KA 3-phase. 31.12 c (iii)

300 amp. to 400 amp. 415 V , 35 KA 3-phase. 31.12 c (iv)

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. HSR 31.13(ii)

M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. HSR 31.14 (i)

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp. HSR 31.15 (ii)

Blanking sheet . Supply and erection of blanking sheet in existing distribution board. 31.16 (i)

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR 31.17a) (ii)

SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. V 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

Supply and erection of Fittings and Accessories. Call bell 220 / 230 volts A.C. bakelite with double coil. HSR 31.18 (vii)

Bell push flush type ( without flexible wire ) in existing sheet. 31.18 (ix) (b)

Bakelite angle / straight button holder large size. 31.18 (xi)

Switch 5 amp. On existing sheet. 31.18 (xii)

Wall socket 5 amp. On existing sheet. 31.18 (xiii)

Supply and erection of rectangular bulk head fitting of size 17 cm x 14 cm, aluminium casted with aluminium colour out side and white stove enamelled inside/complete with guard, glass etc. secured by brass screws suitable upto 100 watts lamp with B.C. lamp holder but without lamp. 31.18 (xx)

Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. 31.18 (xxiv)

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. 31.18 (xxvi) .

Supply and erection of lumineous bell indicator complete including making necessary connections and fixing the same on wall etc. to complete the job in all respect. 31.18 (xxviii)

Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (i)

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. 31.20 (iii)

Erection of cabin fan complete with necessary earthing including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (iv)

Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. 31.20 (v)

Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. 31.20 (vi)

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 40 mm dia on flushed. 31.21 (xii)

Heavy guage welded conduit pipe 32 mm dia 1.60 mm thickness on surface. 31.21 (xvii)

Heavy guage welded conduit pipe 40 mm dia 2.00 mm thickness on surface. 31.21 (xviii)

Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. 31.21 (xxi)

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. 31.21 (xxii)

For additional length of Galvanised iron flexible pipe more than 1 metre ( the payment is to be made for additional length of pipe more than 1 metre only in item no. xxvii ). Size 25 mm dia. 31.21 (xxviii) (c)

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. 31.21(xxx) PVC pipe 120 mm dia. 31.21(xxx) (a)

PVC pipe 80 mm dia. 31.21(xxx) (b)

PVC pipe 65 mm dia. 31.21(xxx) (c)

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired. 31.22(iv)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(x)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xiv)

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

Erection only of lightning conductor G.I. tape including supply of suitable G.I. stapples of same size. 31.24 (i)

Excavation of earth pit 180 cm. round at top and 90 cm. at bottom 4.5 metres deep and refilling the same in plains including supply of necessary charcoal / coke and salt mixture. 31.24 (ii)

Excavation of earth pit 180 cm. round at top and 90 cm. at bottom 4.5 metres deep and refilling the same in hills including supply of necessary charcoal / coke and salt mixture. 31.24 (iii)

Supply and erection of 60 cm. X 60 cm. X 6 mm thick galvanised Iron plate including nacessary bolts and nuts to G.I. tape . 31.24 (iv)

Supply and erection of 20 mm x 3 mm thick lightning conductor G.I. tape fixed with suitable G.I. stapples of same size. 31.24 (vi)

Supply and erection of G.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. stapples of same size. 31.24 (vii)

Supply and erection of 25 mm dia meter 1.5 metre long lightning G.I. tube rod tapered in to a point at the top with 16 cm. X 16 cm x 3 mm thick G.I. base plate and necessary nuts and bolts with washer. 31.24 (viii)

Prioviding and fixing , testing joint made of 20mm x 3mm thick G.I. strips 125mm long with 4 Nos. G.I. bolts and nuits, check nuts with washer complete. 31.24 (ix)

Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. 20 mm dia . 31.35 (i) (b)

Supply and erection of girder clamp for ceiling fan including painting ( Upto 15 cm section ) . Supply and erection of caution notice plate in three languages. 31.35 (iii)

HSR 31.36 Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe. Fan Point Short point

Medium Point

Long point.

Light Point Short point

Medium Point

Long point.

Twin control light point with 2 way, 5 amp. single pole switch. Long point.

Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell. Medium Point

Long point.

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point

Medium Point

Long point.

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Short point

Medium Point

Long point.

HSR 31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 )

Size 4 sqmm ( 7/0.85 )

Size 6 sqmm ( 7/1.05 )

Size 16sqmm ( 7/1.70 )

HSR 31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 8-way , SP&N ( Horizontal)

4-way , TP&N ( Horizontal) (8+12)

8-way , TP&N ( Horizontal) (8+24)

8-way , TP&N ( Verticle) (8+24)

HSR 31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 20 mm dia.

25 mm dia.

HSR 31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

HSR 31.55 Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.

HSR 31.67 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 63 / 50mm outer dia / inner dia.

HDPE pipe 90 / 75mm outer dia / inner dia.

Choudhary Electricals