WBPHED/AE/BMSD/NIeT- 10 OF 2024-2025/18

Amount

Taking out 1 nos 30 HP Pump Motor set from the base frame & dismantling the base frame and RCC concrete foundation by the vibrator Machine with dismanteling of delivery line and taken out of 150 mm Sluice valve after disconnecting all the line i.e. electrical lines, hydraulic lines, valves etc by proper technician part by part including necessary labour charges , lifting arrangement charges of the centrifugal as per direction of EIC.

Transpotation charges for 30HP Pumping machinery from w/s scheme to Asansole work shope for nesseary frabication work of foundation base frame with alligment of pump and Motor as per satisfation & direction of EIC

Supply of M.S joists of size 150 x75 mm conforming to IS:226, IS:808 & SP(6)-1964

Supply of M.S Chanel 150 x 75 mm conforming to IS:226, IS:808 & SP(6)-1964

Supply of M.S. angel section of 75 x75x5 mm s conforming to IS:226, IS:808&SP(6)-1964.

Supplying 4 Nos 12 mm dia 250 mm length galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete.

Supplying 4 Nos 12 mm dia 250 mm length & 10 Nos 10 mm dia 200 mm length galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete.

Supply delivery at site 200 Amp porcelain body Kit-Kat rewirable fuse male & Female complete unit unit IS: 2086

Supplying and fixing 100A, 415V, TPN SFU with sheet steel enclosure side hanndle operated on flat angle iron frame on wall with nuts bolts etc incl .S & F 3nos. DIN type HRC fuse as per rating.

Supply delivery 150 mm dia MSERW 90deg pain Bend Class C R3D

Supply delivery 150 mm dia MS Medium (B Class) pipe as per IS:1239(Part-A) (2004)

Supply delivery 150 mm dia 14 mm thick M.S Slip-On flange table 11as per IS 6392

Supply delivery CIDF 150 mm non-rising Sluice Valve (P.N-1.0) generally conforming to IS 14846 as per technical Specification given in NIT

Supply & delivery CIDF 150 mm CI foot valve (P.N-1.0) generally conforming to IS 14846 as per technical Specification given in NIT

Supply and delivery of Ball Bearing for Driving End & Non driving End 6309-2Z/C3 for Pump

Supply and delivery of Ball Bearing for Driving End & Non driving End 6309-2Z/C3 for Motor

Supply and delivery of Tyre type coupling complete set Suitable for for 22 KW pump motor with existing sample

Supply delivery of outdoor type LED light fixture Operating Voltage 140V-270 V AC 50Hz ,LED light fixture having LM6 pressure die cast Al. housing pot optical reflector and heat resistant toughened Polycarbonate/ Glass cover complete set. M.No-BRP409 LED130 CW SLC FG PSU GR V2 of Philips make or equivalent model.

Supply delivery 80mm dia M.S Black pipe Medium (Class B) as per IS:1239 PART-1 (2004). i) 1.5 mtr long each x 2 nos for each pump house x 1 nos Pump house (For holding Arm at Pump House Roof)

Supply delivey of 1.5 mtr. long M.S Arm bracket made out of 40 mm dia MS pipe with painted anticorrosive paint .

Making M.S Base frame of length 4.50 ft & breath 2.50 ft for 30 HP pump motor by supply joists of size 150 x75 mm & channel sections of size 150 x75 and angle section of size 75x75x6 mm conforming to IS:226, IS:808 & SP(6)-1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,fabrication with supplied bolting,metal arc welding conforming to IS:816-1969 & IS:1995 using electrodes of approved make and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes,gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.tricity charges, labour insurance charges etc.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

Making pump motor foundation in above reinforcement work and fixing the base frame by necessary Nut bolt with Controlled Cement concrete with well graded stone chips (20mmnominal size) excluding shuttering and reinforcement with complete design of concrete asper IS : 456and relevant special publications, submission of jobmix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-incharge.Consumption of cement will not be less than 300Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade

Charges for Pump Motor Aligment by the proper alighmant machine and as per direction of EIC

Installing of above pump motor after design and construction of base frame & fitting fixing above supplied LED light fixture, sluice valve, MS Pipe & flange with making delivery pipeline by necessary welding, drilling & grinding with newly supplyed ball bearing and old serviceable after maintaining complete the installation as per Hydraulic standard & IE rules in compliance & fitting fixing of out door light of item no (14 to 16) by engaging skilled technician all complete as per Technical specification and upto entire satisfaction of EIC.

Painting of the 2 nos pump motor set suction & delivery line by the synthetic enamel paint after properly scraping and using best quality primer as per direction

Making internal wiring /electrification of Pump House by 2x 22/0.3(1.5DSq mm + 1x 22/0.3(1.5sqmm) single core PVC insulated multistranded FRLSH grade flexible copper wire through 20mm PVC conduit pipe/cashing by supplying one no 40Amp, 10KA , 240/415V , 50HZ, SPN/DP MCB isolator conforming to IS/IEC:60947-3, C characterise / As per approved vendor list of PHED vide no-PHE/IV/2277/W-181/19 dated-25-09-21 with required model PVC Board & Piano key type switch (Avg Run 6mtr). i) LED Tube Set point-2nos, Bulk Head light point-1no each with necessary earthing arrangement & one fan point(Total point 6nos)including drawing power DB through 20mm PVC cashing caping (precision make) as per direction of EIC(fitting cut-out to SPN/DP MCB wiring should be with continuous earthing arrangement and 20W two no’s x 4ft long LED tube light make-Philips, Bulk Head light M.No- Endra WT202W LED6S NW PSU S2 PC one nno 0.4 Stap fan regulator fitting etc to be supplyed by agency

Supply and delivery of 2(Two) nos Colored cast Plastic Chair & 1(one) nos rectangular foldable potable table as per technical specication given in NIT

Add: 18% GST

Add: 1% Cess

M S ENTERPRISE (BID ID -6049441)

M/S.S.S.ENTERPRISE (BID ID -6057474)

WEST BENGAL ENGINEERING CO. (BID ID -6050648)