3D Adjustable 360 degree Rotational Modified Driver Seat for three phase locomotives

Special Eligibility Criteria

1. 1

   FOR BULK ORDER: Railway reserves the right to procure entire or bulk quantity (Minimum 80 % of Net Procurable Quantity) from the vendors who have successfully cleared the prototype for 3D Adjustable 360 degree Rotational Modified Driver Seat as per CLW drawing no. 1211-01.131-001 with any alteration. Bidders have to submit final Inspection Certificate or Inspection Certificate for bulk supply from competent authorities as proof of credentials along with offer.

   Document optionalConfirmation required
2. 2

   FOR DEVELOPMENTAL ORDER: A. Other than above, orders for a small quantity up to 20% of Net Procurable Quantity as a development order may be placed on Vendors appearing in UVAM for Driver Seat Assembly against CLW Item ID 2100123, whether approved or developmental. However, firm has to get their prototype cleared as per drawing no. 1211-01.131-001 Alt.5 or latest. Further firms having pending orders of this item and final Inspection Certificate has not issued, they will not be considered for repeat order. B. Developmental orders (Up to 5% Outside Net procurable quantity) may be placed on bidders who have submitted adequate documents along with credentials to establish their capability and capacity to design, develop and manufacture the tender item/Similar item and if prima facie the Railways is satisfied that such vendors may be considered for developmental order. The bidders should also submit documentary evidence (Performance statements, List of Machinery and plant, ISO certificate, Quality Assurance Plan etc.) along with the bid so as to prove their credentials. However, firm has to get their prototype cleared as per drawing no. 1211-01.131-001 Alt.5 or latest. Further firms having pending orders of this item and final Inspection Certificate has not issued, they will not be considered for repeat order.

   Document optionalConfirmation required

Check List

1. 1

   Have you gone through the terms and conditions mentioned in the Tender Schedule, special condition of the tender if any and the CLW BID DOCUMENT- (Rev.V) Jan. 2026 ( Copy attached). Having participated in the tender, it will be considered that you have gone through all the conditions mentioned in these documents and the same are accepted by you.
2. 2

   Have you agreed to supply the tendered stores at the rates quoted by you in accordance with the IRS conditions of contract and in accordance with special and other conditions specified / attached with the tender?
3. 3

   Have you ensured that you are GST compliant and you have quoted Tax structure/ rates as per GST law?
4. 4

   Have you attached the self declaration certificate for percentage of local content and details of location where local value addition is made?
5. 5

   Have you read the Public procurement policy: Make In India guidelines attached to the tender and offered bid after complying the conditions mentioned therein?
6. 6

   Have you agreed for submission of SD if you are not exempted from the same as per the tender condition mentioned inCLW BID DOCUMENT- (Rev.V) Jan. 2026 ( Copy enclosed).
7. 7

   Have you submitted requisite amount of EMD if you are not eligible for exemption from the same.
8. 8

   Have you attached relevant document if you claimed to avail benefit and preferential treatment as MSE firm.
9. 9

   Have you attached relevant document along with the offer for certificate of compliance regarding restrictions under Rule 144 (xi) of GFR -2017.
10. 10

    Have you attached along with the offer a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content?

Commercial-Compliance

1. 1

   (a) All the bidders/Tenderers while quoting the rates should clearly indicate HSN Code, the rate of applicable duties and taxes included in the prices quoted by them. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under Statutory Variation clause (b) All the bidders/Tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law. (c) All vendors should have GST Registration Number. (d) GST Act and Rules as applicable from time to time is applicable (e) In case the successful tenderer is not liable to be registered under CGST/GST/ UTGST/SGST ACT, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism [RCM] and deposit the same to the concerned tax authority.

   Document optionalConfirmation required
2. 2

   The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender.

   Document optionalConfirmation required
3. 3

   The Firm shall pass on (as per section 17 (1) of CGST/SGST Act) any reduction in tax rate on supply of goods or any benefit of input tax credit to the Railway through a commensurate reduction in price without any undue delay. To the above effect the firm should give declaration that all the benefits accruing on account of change in tax rate and any additional input tax credit (ITC benefit) shall be passed on the Railways.

   Document optionalConfirmation required
4. 4

   EMD: All bidders except those who are exempted from submitting EMD as per relevant para of CLW BID DOCUMENT- (Rev.V) Jan. 2026 (copy attached), shall be required to submit EMD as per the amount mentioned in the tender schedule. Offers submitted by bidders without EMD who are not eligible for exemption shall be summarily rejected.

   Document optionalConfirmation required
5. 5

   Security Deposit [S.D.]: Bidders must agree to furnish Security Deposit [S.D.] as applicable @ 5% of contract value subject to maximum ceiling limit as mentioned in CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy attached) failing which their offers will be summarily rejected. Bidders claiming exemption from paying Security Deposit [S.D.] must upload requisite document towards such claim, along with the offer as per relevant para of CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy attached).

   Document optionalConfirmation required
6. 6

   In compliance to Public Procurement (Preference to Make in India), Order 2017 -Rev circulated vide Railway Board letter dated 20.08.2024, bidders to indicate percentage of local content and provide self certification that the item offered meets the local content requirement for Class-I local supplier and also give details of the location at which the local value addition is made.

   Document optionalConfirmation required
7. 7

   The bidder shall provide a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content.

   Document optionalConfirmation required
8. 8

   At the time of execution of the project, for all contracts above INR 10 Crore, the contractor/ supplier shall be required to give local content certification duly certified by cost/ chartered accountant in practice. For cases where it is not possible to provide certification by Cost/Chartered Accountant at the time of execution of project, the supplier shall be permitted to provide the certificate for local content from Cost/Chartered Accountant after completion of the contract, within time limit acceptable to the procuring entity. In case the contractor/ supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-I to Class-II/ Non-local, a penalty upto 10% of the contract value may be imposed. However, contract once awarded shall not be terminated on this account.

   Document optionalConfirmation required
9. 9

   Bidders claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises [MSEs] should necessarily enclose relevant document. Bidder may please refer the CLW BID DOCUMENT- (Rev.V) Jan. 2026 ( Copy attached).

   Document optionalConfirmation required
10. 10

    The authorized dealer has to upload the tender specific authorization letter from the manufacturer authorizing him to submit offer against this tender. The tender specific authorization to the tender should be directly from the manufacturer without which, the offer will be summarily rejected.

    Document optionalConfirmation required
11. 11

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of offers: Offers should be valid for 120 days after closing date of tender. Any offer having lesser validity shall be deemed as commercially unresponsive and will be summarily rejected.

2. 2

   Offer on Firm price basis- Bidders must quote on firm price basis only. Offers with Price Variation Clause (P.V.C.) will be summarily rejected.