CDP:2023-24

Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes but without fittings & base support for tanks. (From SSR rates sno 311) 2000lts

Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding doors with mesh shutter rovision - (2-glass shutters)- 95 -Series duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of Patio/Bent espagulate the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work

Supply of 48" (1200mm) Sweep decorative Ceiling Fan 1 Star Rated with all accessories etc., Makes: Crompton / Havells /Orient/Halonix

Supply and fixing of Mini Modular Stepped type Electronic Regulator with Cover Frame with fixing accessories etc., including labour charges complete as required confirming to IS.(independent)

Supply and fixing and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light housing made with alluminium anodised body, wide operating voltage with double side connection, PF>0.90, Surge protection 2KV, THD < 15%, with inbuilt driver and frosted cover CCT: 3000 K-6500K as desired by the department and as per IS specifications, minimum CR280 etc., complete, with 50,000 burning hours with BIS certificatiion LUMINAIRE MAKE; Philips/OSRAM/Wipro/Crompton/Bajaj/Havells/Jaquar/IB LED/Panasonic Halonix/HPL/Suska/Eveready/Surya/Keselec. LED Make Philips Lumileds/Cree/Nichia/Osram/Samsung/LG LEDs.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of Ist quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard Cl brackets including wooden block :450x300 mm

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make: 590 x 375 x 390 mm

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with Im long tube and wall hook with 10 years warranty

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using 2 Hand fast 300 MM long hold fast

Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in-Charge (SS butt hinges and SS screws shall be paid

Brick masonry in superstructure with CM (1:6) prop mix using Fly Ash Cement Bricks of size 29x20x14 cms from approved source having minimum crusheing strength of 75 Kg/Sqem including cost and conveyance of all materials like cement, sand, bricks, water etc., to site including seigniorage charges, sales and other taxes on all materials all opertional, incidental and labour charges such as mixing cement mortar, constructing masonry scaffolding charges, lift charges, curing etc., complete for finished item of work (APSS No. 501&504

Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to 18:2556 (Part 8)-2004 suit with 'P' or 'Strap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 min long PVC inter connection pipe wall flanges all of approved make etc.

Supply and Fixing of 225mm (9") Light Duty exhaust fan with wire guard etc., complete Makes: Crompton/Bajaj Bahar WG/Havells Ventilair-DB/Orient hill air etc., complete.

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095-1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with Gl Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of

Wiring with run of 2 of 22/0.3 mm (1.5 Sq.mm) FR/FRLS PVC insulated flexible ISI mark copper cable of GM/L&T/RPG/Havells/V-Guard / Power Flex / Polycab/Gold Medal /Standard/Milion / Vimal / Sun cab / Paragaon / Fortune Art make in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all material and all labour charges but excluding GST etc., complete for light, bell, fan and exhaust fan points including cost and conveyance of all material and labour charges but excluding GST

Supply and fixing of 6A ISI mark Flush type switch of makes Anchor/Gold Medal Olive / Million Zoom with 6A 3/2 pin wall plug socket of Anchor/Gold Medal Olive / Million Zoom make on a common switch board with earth connections in surface /consealed wiring including cost and conveyance of all materialsa and labour charges but excluding GST.

Supply and Fixing of 16A/6A 3pin plug socket with shutter and 16A modular switch control duly recessed in wall with Galvanised hot deep box of with common switch board including earth connections and all labour charges etc., complete. Makes of Switches: Legrand Myrius / GM Four Five/Million mway /Goldmedal Curve /Anchor Roma Plus / Havells Fabio/Panasonic Vision/Hager Insista / BenloVesta / C&S Primo/CPL Vysma/Polycab Levana / Salzar/ Infinity

Supply and run of 3 of 36/0.3 mm (2.50 sqmm) FRLS/HFFR PVC insulated ISI Copper cable of make Polycab / Havells /Gold medal / L&T/HPL with ISI mark in existing metallic / non metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work

Supply and transportation of 90W LED Street light Body made 5 6 of high grade pressure die-cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover/temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range. P.F 0.90, System having efficacy >120 lumens/watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV. THD<15%, CCT: 3000-6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates LUMINAIRE MAKE PHILIPS /OSRAM/GE Venture/CROMPTON/BAJAJ/Surya/Wipro/Jaquar/Eveready/Halonix/Keselec/HAVELLS/POLYCAB

Supply and laying of 25mm dia 1.5mm thick P.V.C. pipe ISI mark of Sudhakar / Maco Plast/Modi make for wall Surface with all required accessories etc., complete including cost and conveyance of all material, all labour charges, and contractor profit etc., complete but excluding GST. (Surface on wall)

Supply and laying of 19/20mm x 12 mm and thickness 1.2 mm width and height Casing and Caping with all accessories such as Ts. Bends, Elbows etc., complete for finished item of work. Makes: Modi with ISI or its equivalent make as approved by the department and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metallic deep box including all labour charges etc., complete including masonary work, including cost and conveyance of all material, all labour charges, and contractor profit etc., complete but excluding GST.

Supply and Transportation of | HP 15 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Flowell / Waterman / Ellen/Kirlosker/Narayani / Sai Varsha /Sterling

Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct-on-Line LK (L&T)/SIEMENS/CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with ISI mark MCB etc.. complete. 1x1

Supply and run of 2 of 14/0.3 mm (1.50 sqmm) FRLS/HFFR PVC insulated ISI Copper cable of make Polycab / Havells /Gold medal/L&T/HPL with ISI mark in existing metallic/non metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc.. complete for finished item of work. motor cable

Supply and run 2 of 4 Sq mm 56/0.3 mm and 1 run of 2.50 sqmm 36/0.30 mm F.R L.S. / HFFR P.V.C. 2.55am (26/0.3insulated flexible copper cable 1100 V grade as per IS: 694 /1990 specifications in the existing conduit pipe for run of mains from main panel board to TPN DB'S with pin type lugs and connection Makes Finolex / RR kabel / Havells / Polycab Beljin (HFFR) /Ollvin (HFFR) /Finecab Gold (HFFR) /GM(HFFR)/Gold Medal(HFFR) / Million(HFFR)/KEI (HFFR) /V-Guard (HFFR)./ DEC (FRLS/HFFR)/Bonton (HFFR) and Avocab (HFFR) / Fortune Arrt (HFFR) / SPM (HFFR) /Sudhakar (HFFR)/Nakoda (HFFR)/ HPL (HFFR)/GLOSTER (HFFR)/Rajnigandha (HFFR) / Pawancab (HFFR) / South King (HFFR) motor cable

Supply and fixing of AshirvadAjay/Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tubes of size 1/2" ton 2" Ashirvad Flowguard) and SDR 11 pipes are made from idential CPVC compounds having the same physical properties for Hot and cold water (IS 15778:2007) including labour charges for fixing of CPVC/PPR Pipes etc, 22.20mm OD Pipe - SDR 11

Supply and fixing of AshirvadAjay/Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tubes of size 1/2" ton 2" Ashirvad Flowguard) and SDR 11 pipes are made from idential CPVC compounds having the same physical properties for Hot and cold water (IS 15778:2007) including labour charges for fixing of CPVC/PPR Pipes etc, 15.90 mm OD Pipe - SDR 11

Manufacture, Supply, & Delivery of 110mm dia unplasticized Non-pressure polyvinyl chloride (PVC-U) pipes of dark (any shade of brown) for use in underground drainage & sewerage system conforming to IS 15328/2003) with solvent cement jointing as per specification inclusive of transpor tation to the sub-divisional stores anywhere in T.G, excluding Taxes.

Earth work excavation for foundations and depositing on bank 5 6 for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring sheeting. planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS -20 B (APSS 308) including cost and conveyance of all material and labour charges and contractors profit & over heads but excluding GST & seignorage charges etc., complete.

Constructing Brick masonry chamber over the gully trap or peet valve and fitted with 304.8 x 228.6 m size Cl frame and hinged cover.

Providing brick work of 230mm thick in CM (1:6) prop., using common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size including cost & conveyance of all material and labour charges, centering & scafolding charges, and overhead charges & Contractors profit etc., complete as per APSS No.501 for Super structure and others but excluding GST and seignorage chages

Plastering 12mm thick two coats in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves, finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Internal Walls

Supply and placing of the PCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, etc. complete but excluding GST and seignorage charges for finished item of work. CC Pavement

Cutting CC road surface including stacking of excavated materials for pipe line trench work etc., complete for finished item of work

Providing independent earthling by excavating a trench to a depth of 1.0 M in all soils, as per size specified in the Data, using 40mm dia B class Gl pipe of 1.00 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circuit Braker (ELCB) /Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs 12 Nos as out going including internal connections and labour charges for surface /flush mounting etc., complete.

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circuit Braker (ELCB) /Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs 8 Nos as out going including internal connections and labour charges for surface /flush mounting etc., complete

Supply and fixing of CPVC Tap including cost and conveyacne of all material etc., complete.

Supply and fixing of 25mm dia 16kg/cm2 HDPE pipe includint cost and conveyance charges etc., complete

Flooring with Ceramic non skid tiles of net less than 7.3mm thiek Ist quality laid over floor bed /VRCC slab set over 12.0 mm th.in CM (1:8) prop. base coat and neat grey cement slurry of honey like consistence spread at the rate of 3.3 kg of cement per Sqm and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials to site, including cost of mixing of mortar and watering, leveling to proper slope and curing including over heads & contractor profit, all labour charges etc., and excluding GST and seignorage charges for finished item of work but excluding cost of CC bed and dadoing to walls

Providing dadooing to walls with 5-7mm thick ceramic wall tiles 1st quality of 7.30mm and of size approved by Engineer-in-Charge, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including over heads & contractor profit, cost of all materials like tiles, cement, sand and water etc., complete including complete for finished item of work, but excluding GST and seignorage charges