Loading…
Loading…
Tender Value
₹3.0 L
EMD Value
₹8,700
Closing Date
23 Jan 2026, 11:00 pmClosed
Rural Development and Panchayat Raj Department
CONSTRUCTION OF COMMUNITY TOILET IN JAKABALA VILLAGE, SAVADATTI TALUKA.
RDPR/2025-26/BD/WORK_INDENT22910
RDPR/2025-26/BD/WORK_INDENT22910
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Gram Panchayat Office Teggihal TP Savadatti
₹500
₹8,700
9 Jan 2026
9 Jan 2026
27 Jan 2026
22 Jan 2026
CONSTRUCTION OF COMMUNITY TOILET IN JAKABALA VILLAGE, SAVADATTI TALUKA.
Earth work excavation by manual means for drains, canals, waste weir,
draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position plain cement concrete for leve ling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Coursed rubble masonry (second sort) with hard stone in
foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
(PWD SR 2023-24, V-II, Pg No-9, It No-5.3)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork, Centering & Scaffolding For RCC Roof Slabs 50%
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt c ay Non Modular bricks of
class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Half brick masonry with common burnt clay Non Modular
bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...
Providing 12 mm cement plaster finished with a floating coat of neat
cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including
rounding off corners wherever required smooth rendering, prov...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming ...
Providing & fixing factory made PVC Door frame of s.ze 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled
Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and
15x15nmi for top & bottom rails, covered with heat moulded P...
Orissa pattern W.C. pan of size580 x440 (PWD SR 2023-24, V-II, Pg No-
Finishing walls with water proofing cement paint of required shadeOld
work (one coats applied @ 2.20 kg/10 m2) over priming coat of primer
applied @ 0.80 litrs/10 m2 complete including cost of Priming...
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specific...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments25 mm dia PVC Elbows(PWD SR 2023-24, V-V, ...
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and ...
13.17 Providing and fixing PTMT bib cock of approved quality and
colour. 20 mm nominal bore, 89 mm long, weighing not less than 88
g(PWD SR 2023-24, V-II, Pg No-120, It No- 13.18.2)
Providing and fixing G.I. Union in existing G.I. pipe File, cutting
andthreading the pipe and making long screws, including excavation,
refilling the earth or cutting of wall and making good the same ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) ::(PWD SR 2023-24, V-II, Pg No-117, It No-13.4.1)25 mm nominal bore
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .