Interior Renovation works for Invest India Office space at 9th Floor NDCC II Building New Delhi

S.No. Description of Works Amount SR Amount MR

2 Modular Furniture - ₹ 13,959,194.54

4 Plumbing & Fire fighting Works ₹ 2,225,256.20 ₹ 2,481,864.52

6 Audio-Visual Works ₹ 0.00 ₹ 14,207,287.91

Total Amount (Including GST) ₹ 74,365,197

Total Amount (Including GST) ₹ 74,365,197

Digitally signed by ASHWANI

ASHWANI KUMAR BANSWAL

Civil and Interior Works- Office of Invest India at New Delhi

S.No. Description of Works Amount

Amount (DSR in Rs.)

2 Masonry & Plaster

3 Paving & Wet Works

4 Partitions & Wall Cladding

6 Doors & Windows

7 Finishes & Miscellaneous

GRAND TOTAL 27,085,277.47

GRAND TOTAL 27,085,277.47

Fit-out Works for office of Invest India at New Delhi

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

CIVIL & INTERIOR WORKS

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 1,650.00 85.70 141,405.00

Dismantling tile work in Wall dado laid in cement mortar including stacking material within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of

rubbish to the dumping ground within 50 metres lead.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and

1.4 15.7 disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave,

1.5 15.12 holdfasts etc. complete and stacking within 50 metres lead:

a 15.12.1 Of area 3 sq. metres and below EACH 98.00 274.50 26,901.00

b 15.12.2 Of area beyond 3 sq. metres EACH 5.00 375.65 1,878.25

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal

1.6 15.57 of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- SQM 440.00 42.00 18,480.00

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres

lead as per direction of Engineer-in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 1,440.00 1737.45 2,501,928.00

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually / by

1.8 15.45 mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of

pipes & lead at site within 50 metre lead as per direction of Engineer-in-Charge:

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes,

manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-

15.44.1 in-Charge:

15 mm to 40 mm nominal bore RM 100.00 108.15 10,815.00

Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials

near the site and disposal of unserviceable materials within 50 metres lead.

MR Based Dismantling o Wash basins, Urinals, WC including stacking of useful material near the site and disposal of

1.12 on item No unservicable materials within 50 metres lead Nos 23.00 735.37 16,913.53

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work (Payment shall be

made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge.

1.15 15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. kg 500.00 6.70 3,350.00

1.16 1.1 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

TOTAL OF DISMANTLING 3,935,416.39 16,913.53

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating

coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 1,320.00 498.35 657,822.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) CUM 5.00 7809.25 39,046.25

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 315.00 932.10 293,611.50

2.4 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick SQM 315.00 80.10 25,231.50 -

2.5 13.2.1 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 SQM 630.00 307.90 193,977.00

ROUGH : 4CEMENT

fine sand) PLASTER :- 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,

2.7 5.3 shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor CUM 1.00 9763.8 9,763.80

five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5

2.8 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 15.00 552.05 8,280.75

2.9 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding

Hotcomplete above plinth

rolled deformed bars level.

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning over

cement plaster in line & plumb finished smooth to receive paint. (Internal surfaces of walls).

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement

slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement

@ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to

air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement

2.11 22.5 compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for SQM 220.00 465.60 102,432.00

48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding

2.12 2.35 the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including

2.35.3 drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor:

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration SQM 1,650.00 227.05 374,632.50

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and compacting Foam Concrete

for raising level of toilets and pantry and finishing in a coat of lean concrete screeding with waterproofing

compound complete in all respects to take Tile Flooring as per flooring specifications.

Providing and fixing removable raised/false access flooring with system and its components of approved make

for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing

floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness

minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x

3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully

threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto

50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to

the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm

thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws

ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall

receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system

shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits

and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high

pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an

enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20

welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity

formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed

with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure

laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within

0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without

collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly

Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved

manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on

the side of the panel to ensure the quality of the product.

300 mm Finished Floor Height (FFH)

SUB TOTAL OF MASONRY AND PLASTER 1,867,419.94 172,802.27

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

3 PAVING AND WET WORKS

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as

3.1 8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar SQM 197.60 1030.30 203,587.28

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,

3.2 11.38 Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), SQM 99.00 996.70 98,673.30

jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching

pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,

laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in

3.4 11.46 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.

b MR Size of Tile 1200x800 mm SQM 20.00 2520.72 50414.34

c MR Size of Tile 1200x300 mm SQM 20.00 2694.78 53895.70

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic

3.5 11.48 coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge.

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work)

including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of

different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid

3.6 8.11 and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with

pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural

drawings, and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in

linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over

3.7 11.51 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement

slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble

shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. SQM 25.00 5986.20 149,655.00

Providing and fixing AC -5 grade laminated wooden flooring in planks, fixed using tounge and groove system,

3.8 MR of approved shade.Each plank to be of 190mm X 1380mm (min) having a warranty of 10 years. The item to SQM 122 4047.92 493,846.39

including all consumables and appropriate skirting as per approval from engineer-in-charge.

Providing and laying customized carpet in approved colors / designs. The carpet shall be anti-static. The item to

3.9 MR include all consumables, adhesives, etc. Installation to be done complete as per manufacturers specification and SQM 550 3688.48 2,028,663.28

up to satisfaction of engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,

3.10 8.2 colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

a 8.2.2.1 Area of slab upto 0.50 sqm SQM 90 4217.35 379,561.50

b 8.2.2.2 Area of slab over 0.50 sqm SQM 22 4007.65 88,168.30

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets counters

complete with base cabinet made of 20mm BWP board, outside surface (shutters) finished in 1mm thick

3.11 MR Laminate of approved shade. All internal surfaces to have balancing laminate. The rate inclusive of necessary RMT 25.00 9634.19 240,854.69

hardware, handle lock sets, self closing hinges, spring loaded shutter, latch inside, all cabinet hardware

complete as per Architects approval. Width of work top counter 600mm/ detailed drawings.

TOTAL FOR PAVING & WET WORKS 2,179,834.73 3,526,276.49

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

4 PARTITIONS AND WALL CLADDING

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I. frame and

required board, including providing and fixing of frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm

wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm

centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal

4.1 9.105 screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and

0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm

centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to

wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and

fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels

at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel

of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of

two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5

mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction

of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG)

9.105.1 plaster board conforming to IS: 2095: SQM 10.00 1741.15 17,411.50

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling using board of

required thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55 mm and two

flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange

of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter

4.2 9.133 channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-

tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head screws @ 200

mm C/C., all complete as per the drawing & directions of engineer-incharge, the joints of the boards are

finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.

Gypsum board conforming to IS: 2095 Part - I

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. toughened

glass with anodised Aluminium frame fixing glass with snap on option consisting of top, bottom and side

frame measuring 40-46mm x 18mm-25mm complete with glazing rubber as per manufacturer's specifications

4.3 MR and instructions of Engineer- in-charge. Rate include supply & Installation of 12 mm thk toughened glass with SQM 87.50 2,132.23 186,570.23

double sided adhesive tapes for glass to glass butt joints. Partition system from FFL to False Ceiling level,

inclusive of cost of support required for fixing in the ceiling. The frame to be powder coated in desired shade

as per the instructions of the Architect.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

CURVED GLASS PARTITIONING:- Providing & Fixing curved glass partition using 12mm Thk.

toughened glass with anodised Aluminium frame fixing glass with snap on option consisting of top, bottom

and side frame measuring 40-46mm x 18mm-25mm complete with glazing rubber as per manufacturer's

4.4 specifications and instructions of Engineer- in-charge. Rate include supply & Installation of 12 mm thk SQM 14.40 4129.53 59,465.21

toughened glass with double sided adhesive tapes for glass to glass butt joints. Partition system from FFL to

False Ceiling level, inclusive of cost of support required for fixing in the ceiling. The frame to be powder

coated in desired shade as per the instructions of the Architect.

Providing & Fixing of Double glazed modular system consist of Aluminium section of 25*100*1.5 mm thick.

All sections duly anodised up to 15-20 microns with 6063-T6 grade and required accessories ie glass to glass

4.5 aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling profile, SQM 75.00 10061.29 754,596.84

Floor profile and wall profile are 25 mm visible face and 100 mm wide with toughened glass & insertion of

silicon gasket to adhere the glass firm & airtight.The sound reduction Value is from 45 to 49 Db

Providing & Fixing of Single glazed modular system consist of Aluminium section of 25*100*1.5 mm thick.

All sections duly anodised up to 15-20 microns with 6063-T6 grade and required accessories ie glass to glass

4.6 aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling profile, SQM 5.00 7224.86 36,124.32

Floor profile and wall profile are 25 mm visible face and 100 mm wide with toughened glass & insertion of

silicon /Thermo plastic gasket to adhere the glass firm & airtight.Sound Reduction from 32 to 35 db.

PLYWOOD PARTITIONING- Plywood partition (straight and curved) using 12mm fire retardant ply

fixed on both sides on aluminium Studs Frame 50mm x 50mm x 1.5mm & 50mm x 60mm x 1.5mm as per

approved sample and architectural drawings placing the same 600mm c/c . Aluminuim frame to be fixed to

floor and RCC Ceiling using fastners.

PLYWOOD PANELLING- Plywood panelling using 12mm fire retardant Ply fixed on one side on

4.9 MR Aluminium Frame 50mm x 25mm x 1.5mm as per approved sample and architectural drawings. Aluminium SQM 414.00 2986.57 1,236,440.02

frame to be fixed to walls, floor and RCC Ceiling using fastners.

Cladding using 12mm thick fire retardant ply of existing frame/ surface.

FINGER JOINT TEAK BOARD CLADDING :- Providing and fixing 19mm thick Finger Joint Aglomerate

Teak Board on aluminium Studs Frame 50mm x 50mm x 1.5mm. The top layer of teak board to be cut using

4.11 MR router to create the Signage, the cut portion to be layered with the Finger joint board to provide a relief effect. SQM 26.00 4683.22 121,763.60

The other side to be finished in 12mm ply. Teak board to be finished in Mellamine Polish. As per design and

instructions of engineer-in-charge.

VENEER CLADDING- Providing and Fixing 4.0 mm thick decorative /Natural Veneer of approved design

4.12 MR and shade , cladded on to existing partitioning. Complete Cladding to be finished using polish (gloss/matt) as SQM 125.00 3407.11 425,888.82

approved by the architect.

LAMINATE & MDF CLADDING- P/F 1mm thick laminate over, and including 4 mm thick MDF, on an

existing Plywood surface, in desired pattern with 4mm thick grooves complete as per the detail drawings. The

item to includee cleanng and finishing the grooves with paint. The works to be done as per directions of

engineer-in-charge.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS:

8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw,

rawl plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of

Engineer-in-Charge.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded

wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I,

4.15 9.18 Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be

painted with polyurethane primer (fittings to be paid separately).

Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick complete with all necessary nails,

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of

4.17 9.79 approved quality including necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete:

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three

layer particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having

4.19 9.129 one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of SQM 30.00 1928.90 57,867.00

25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as

per direction of the Engineer-in-Charge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and

fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

Kiln seasoned and chemically treated hollock wood cum 3.13 224,566.23

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters

out of 19mm Commercial Plybaord finished in 1mm Laminate of base cost Rs. 380 per sqmt. Shutters to be

fixed to a frame. Rigidly fixed on both sides and top finshed in laminate. No internal carcass required. All

Hinges of hettich or equivalent. Internal Surface of the shutter in balancing white laminate. All shutters to be

provided with Stainless steel louvers at the top and bottom of the shutter as per the site requirements and

instrcution of the Engineer In charge.

Providing and fixing of MS powder coated frame for display cabinets as per approved design and shade

including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.complete as per satisfaction of engineer-in-charge

BISON BOARD PANELLING- Bison board panelling using 12mm bison board fixed on one side on

Aluminium Frame 50mm x 25mm x 1.5mm as per approved sample and architectural drawings. Aluminium

frame to be fixed to walls, floor and RCC Ceiling using fastners.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 478,497.48 5,049,286.80

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on

both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 950.00 1117.65 1,061,767.50

Providing and fixing of mineral fiber ceiling tiles, with hot dipped galvanized steel grid work (Silhotte) ,

surface chemically cleaned capping pre-finished in baked polyester paint, Main Tees of size 38 (H) x 15 mm

every 1.2M centre to centre, centre to centre to form a grid of size 600 X 600 mm and suspending the grid from

RCC roof using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm intervals. And laying

5.2 MR mineral fiber Acoustic ceiling tiles MV B-Pin of size 600 x 600 x 15 OCR mm over the formed grid having fire SQM 150.00 1,114.90 167,235.08

rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise Reduction Coefficient

(NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk. Humidity Resistance up to 99% at 50’C.

The grid to be used is Silhoutte type as per approval of the architect

Providing and fixing of mineral fiber ceiling tiles, with hot dipped galvanized steel grid work (Silhotte) ,

surface chemically cleaned capping pre-finished in baked polyester paint, Main Tees of size 38 (H) x 15 mm

every 1.2M centre to centre, centre to centre to form a grid of size 1200 X 300 mm and suspending the grid

from RCC roof using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm intervals. And

5.3 MR laying mineral fiber Acoustic ceiling tiles MV B-Pin of size 1200 x 300 x 20 OCR mm over the formed grid SQM 55.00 3,832.39 210,781.37

having fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise Reduction

Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk. Humidity Resistance up to 99%

at 50’C. The grid to be used is Silhoutte type as per approval of the architect

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "Novapan "pre-laminated board with

5.4 MR hardwood framing, dead locks, lapping all around including all hardware, hinges etc. complete as per design SQM 10.00 1572.81 15,728.15

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood

5.5 MR framings hung from ceiling @1000mm centre to centre with 1 nos of 12mm thk. fire retardant ply on vertical & RMT 198.00 947.60 187,624.74

horizontal surface (straight & curved). Inclusive of finishing in Paint.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing Natural Teak

Veneer on 12mm Underlay commercial Ply fixed to a subframe made using 50mm X 50mm Kiln seasoned and

5.6 MR chmeically treated hollock wood fixed to RCC ceiilng using Fastners . The cost to inlcude the finishing of the SQM 237 4,742.83 1,124,050.18

Veneer using wood stain and clear coat of PU (Gloss/ Matt) as per the instructions of the Engineer In Charge

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to macth the

5.7 MR specifications same as above RMT 20 796.17 15,923.36

Providing the wooden cove of 150mm x 150mm having a facia of 75mm to macth the specifications same as

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum

5.9 MR ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as RMT 105 315.46 33,123.19

per drawings. (visible surface of gypsum band to not exceed 100mm) including plastic emulsion paint.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

SUB TOTAL OF CEILING 1,061,767.50 1,944,129.22

6 DOORS & WINDOWS

35MM THICK FLUSH DOOR WITH FLOOR SPRING- 35mm thick flush Doors finished using 4mm Thick

Veneer/ 1mm thick laminate (to be paid seperatly ubder relevant sub head) on both sides panel of size upto

2400mm x 1200mm complete with Hardware including floor spring, Door Closer, dead Lock with inbuilt key,

6.1 D-Handle (upto 1200mm) etc. including cost of teak lipping all around with melamine/ duco finish. The item to Nos 15 14,195.80 212,936.95

include installation of all kinds of latches as per the requirement.

FRAMES- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs

or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 3.88 130183.05 505,110.23

Kiln seasoned and chemically treated hollock wood

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

6.3 9.21 decorative type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

6.4 9.23 shutters (over all area of door shutter to be measured) SQM 66.00 401.40 26,492.40

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and

6.5 9.40 priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts

and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :

6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete

125x85x5.5mm (heavy type)

DOOR CLOSERS:- Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and

6.8 9.84 door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws EACH 75.00 851.6 63,870.00

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses

6.9 MR & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EP EACH 50.00 2,894.71 144,735.37

Cylinder for all flush doors.

6.10 9.81 HANDLES;- Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing door handle set (2nos) upto 1350 mm in SS/ wooden finish complete with all acessories

6.11 MR required as per satisfaction and approval of engineer-in-charge. Set 26.00 3,635.68 94,527.56

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as per

6.12 9.97 IS : 1868 ), transparent or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with necessary

6.13 9.82 screws, etc. complete. EACH 51.00 106.70 5,441.70

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel UPVC Windows, DGU/ Sandvich

Glasses (6 mm Reflective Glass + 10 mm Air Gap + 6 mm Plain Toughned Glass) on two tracks and SS Mesh

6.14 MR on One Track, complete as per the requirement of engineer in charge. sqm 95.00 10,526.56 1,000,023.64

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 900x2400. with vision panel

using wired glass complete with Fire proof door frame. One side to be finished in fire retardant paint and one

6.15 MR side to be finished in Laminate of approved shade. All Frame to be finished in fire retardant paint. All hinges EACH 8 22,353 178,825.57

and hardware to be thermatically sealed and 120 mins fire rated.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture,

6.16 21.18 including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary SQM 65 4447.90 289,113.50

holes etc. for fixing required door fittings, all complete as per direction of Engineer- incharge.

SUB TOTAL OF DOORS & WINDOWS 1,303,015.87 1,631,049.10

7 FINISHES & MISCELLANEOUS

PRIMER: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall

7.1 13.43.1 surface. Water thinnable cement primer. SQM 1,360.00 60.00 81,600.00

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV

7.2 13.48A resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade

(Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior

13.48A.1 primer applied @ 0.90 litre/10 sqm. SQM 1,360.00 146.20 198,832.00

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

7.3 13.80 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. SQM 1,360.00 115.15 156,604.00

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and

7.3 10.25 applying a priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 200.00 131.00 26,200.00

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

13.61.1 Two or more coats on new work SQM 75.00 121.55 9,116.25

Providing & fixing imported decorative Poly décor fabric Wall Paper (Object) of weight 475 g /sqm as per

approved shade & design including prepration of surface with 2 coats of Nubin Glue based epoxy quote.

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially by

curtain coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall)

conforming to EN 16477 standards for back painted glass , of approved color by Architect/ Client fixed

with compatible Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time

of 10 to 30 mins compatible for installation of mirror and lacquered glass / Foam based double sided adhesive

tape for instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond strength (Dry,

7.6 M.R. 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral Nos. 32 3,473.57 111,154.12

fibre board which is mounted on the RCC wall/any other structure. The contractor should submit test

reports for backpainted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036

1999); Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO

2409 ( Cross Hatch Test ) standard The manufactured backpainted glass should be environmentally friendly (no

lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post

consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS

7.7 M.R. warranty as approval of the Architect. (Only film surface area shall be measured and paid). SQM 54 1,918.63 103,605.92

Providing and fixing of eletronically controlled optical switchable privacy glass film (polymer dispersed liquid

crystal film) having 2 layers with small droplets of liquid crystal at micron meter level dispersed in a polymer

7.8 matrix, complete in all respects including adapter, making necessary electrical provision, etc. upto saticfaction SQM 15 48,718.62 730,779.35

of engineer in charge.

Providing and fixing of 25mm thick synthetic grass of 3/8 inches gauge, pile height of 25mm +5%, total weight

2500gsm, having anti- ageing PP weave cloth with net non woven cloth having carboxyl styrene butadiene

7.9 coating complete with all neccessory consumables and accessories. SQM 33 1,224.08 40,394.61

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

ACRYLIC SOLID SURFACE - Providing and fixing counters (vanity or in any other location) with 12 mm

thick acrylic solid surface manufactured as per ISO 19712-2. Solid surface used should be Microbial resistant

and resistant to mould growth, boiling water resistant, heat resistant, impact resistant, stain resistant, scratch

resistant as per ASTM G171 ( min 800 MPa), Green Guard certified and with a fire rating conforming Class 1

7.10 M.R. as per BS 476 (Part 6 and 7). Acrylic solid surface having minimum density of 1.65 g/cm3, fixed over

Aluminum Sections/19MM Marine Grade ply/ BWP board designed to support a weight of 25 Kg. per Sqmtr.

with suitable flexible adhesives (moisture cured Silicon Sealants) as per manufacturer's specification and

guideline, including fascia and back splash area as per approved drawings and design. The Joints of Solid

surface should be joined with adhesives having Low VOC of 238 g/ litre as per UL 2818 and SCAQMD.

The Counter top should be finished with moulding of edges, buffing of surface, making of holes for plumbing

fixtures, flushing of joints, installing of necessary hardware, sealing with silicon sealants, etc. All complete as

per direction of Engineer In charge. The Solid surface used should confirm to impact resistance of more than

180cm in ball drop test as per ISO EN 438-2 Clause 21, The plan and elevation area (horizontal and vertical)

excluding wash basin area will be measured for payment. Fabrication to be done as per the manufacturers

fabrication manual, Solid surface manufacturer to provide 10 years installed warranty on the works.

HONEYCOMB BLINDS - Original Non-woven honeycomb shades having soft fabric appearance and high

energy - efficient fabric with high tear strength constructed out of Anti static, anti-UV, damp proof, resilient,

colour fast & Sanitized Treat 100% spun bonded non-woven polyester fibre & precision manufacture to form a

hexagonally shaped cell. Cell size 3⁄4”Honeycomb structure with dis􀆟nct air pocket for energy efficiency and

increased insula􀆟on. Shadings are single tone facing both exterior and interior. Being a Low shading co-

efficient will have following Comfort rating & solar optical properties. Aluminium profile should have temper

WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The tensile

strenghth of profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit engineered

heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing

7.11 M.R. minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating Exclusive clutch with SQM 45 4,934.90 222,070.42

safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most

convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball

chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for

reduced operating force on larger blinds.. Mounting hardware brackets universal brackets including end plug

bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of

stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper

WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm

diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action

of the shades. Plastic parts all plastic components are UVstable compounds available white.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

ZEBRA BLINDS - 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue part ), Colorfastness to light - above 4

grade. Blind tube is made of Aluminum with a diameter of 36mm, botom rail is made of Aluminumwith

powder coated having weight 390 gm/meter fitted with end caps in colour matching to thefabric and

mechanism is of plastic with chain and metal bracket. The Blinds comes with Aluminum cover with the

matching fabric designed on it. Aluminium profile should have temper WP consisting of alloy 63400 along

with anodizing of 10 micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10

Kg/mm square and elongation 18.The control clutch driveunit engineered heavy duty chain drive pulley

operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at

minimum of 38mm into roller tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket

7.12 M.R. installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large SQM 125 4,112.42 514,051.89

windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be

positioned at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force

on larger blinds.. Mounting hardware brackets universal brackets including end plug bracket with lock down

retainer device.Brackets finish of powder coated metal installation brackets made of stamped and hardened

steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-

shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord with

plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades.

Plastic parts all plastic components are UV-stable compounds available white.

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top tube of 38mm diameter,

powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The Roller Blind fabric

should possess the below mentioned specifications with fabric made up of 85% Polyester and 15% Catonic

Polyester. Roller blinds with Solar protection fabric of high tenacity Polyester Yarn & Fungi static Treatment

and should block the light flux & offer elimination of glare and sunlight / heat radiance. Fabric shall have

visible light & solar properties. 1st weave of thickness 0.32mm ±5% (ISO 2286-2) and weighing 210g/sm±5%.

Flame Retardancy as per AS301.3-1999. Fabric Protected by teflon fabric protector for water and stain

resitance. Harmful substance standard Oeko-tex standard 100. Constrruction of fabric 16.5+1_ Warp and

end/cm 17.5+_1 (fill). Aluminium profile should have temper WP consisting of alloy 63400 along with

anodizing of 10 micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10

7.13 MR Kg/mm square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley SQM 55.00 2,023.57 111,296.31

operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at

minimum of 38mm into roller tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket

installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large

windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be

positioned at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force

on larger blinds.. Mounting hardware brackets universal brackets including end plug bracket with lock down

retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened

steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-

shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord with

plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades.

Plastic parts all plastic components are UV-stable compounds available white.

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

Reception Table:-Providing & Installation of Reception table of overall size upto 1.8m x 0.75m x1.2m (ht)

madeout of 18mm thick commericial ply complete as per design. The front facia (1.2m height ) along with the

return panel on both sides(1.2m height) to be finished in 16mm thick italian stone of approved shade. All other

7.14 M.R. visible surfaces to be finished in veneer of approved shade and PU polish. All non-visible/hidden surfaces to be each 1 124,462.12 124,462.12

finished using 0.8mm thick balancing laminate. One (1) number fixed drawer pedestal with 3 lockable drawers

and channels to be provided under the table. The front face of table to have CNC cut/ embossed branding as per

approval from the client.

Conference Table - Providing & Installation of Custom made rectangle board room table complete as per

design of the overall size of upto length 7.0 m, ht . 0.75m, width 1.5 m. Table top to be made in 18mm thick

commercial ply and finished in 4mm thick veneer of approved shade having edge moulding of 50-75mm thick

tapered edge on all sides. Understructure of the table to be made in 18mm thick commercial ply cladded in

veneer ot match the table finish complete as per desig. The understructure to be hollow for taking the wires

7.15 M.R. upto the table and a 19mm Thk Commercial board Raceway (150 x 150 ) below table top to be provided for each 1 326,374.85 326,374.85

carriage of cables. All surfaces to be finished in 4mm thk veneer of approved shade and pattern and finished in

approved color and shade with a coating of clear PU ( Gloss + Matte ). The veneer to have 4mm x 4mm

grooves as per design, to be filled with brush finish SS 304 inlay. The cost to include making of cut outs

necessary for electricity pop up boxes. All veneer surfaces to be finsihed in PU polish.

Parametric bench (size - 2.6m x 1.4m x 1.5m (h))- Parametrically designed and digitally fabricated with layers

of 18mm BIRCH ply grade- A boards all CNC cut as per digitally generated sliced pattern of 3D computational

model of approved design. All sliced components have 18mm spacing ties together with 12mm stainless steel

treaded rods covered with 18mm wooden spacers of hte same ply. The edges of the plyboard to be sanded to

7.16 M.R. smooth finish. All planes slices and spacers to be clear coated with water based poly-urithane. Wooden Nos. 1 398,075.85 398,075.85

menbers and plywoood surfaces abutting the or floor shall be treater with a coat of antu termite solution before

Providing & fixing plywood raised stepped seating in 2-3 Tier, complete as per design and drawings, on the

existing slab level with a sub-frame made out of 18mm thick BWP ply fixed using tongue and groove joinery,

complete as per design and drawings to be fixed in both the directions using adhesives, nails, screws etc.

having an average spacing of 400mm- 600mm in both the directions. The top surface of the sub frame to be

7.17 M.R. fixed with 18mmm BWP ply to provide a firm base. The complete raised stepped seating shall be firm and sqm 32 4,193.83 134,202.63

stable and anchored on the adjoining walls, columns etc. with the help of dash fasteners, if required, complete

to the satisfaction of the Engineer In Charge. The surface area of the stepped seating (Tread & Riser) shall be

measured for payment.

Providing & fixing plywood raised flooring upto 200mm high on the existing slab level. The Raised flooring to

be made on a sub-frame made out of 18mm thick BWP ply fixed using tongue and groove joinery, complete as

per design and drawings to be fixed in both the directions using adhesives, nails, screws etc. having an average

7.18 M.R. spacing of 400mm- 600mm in both the directions. The top surface of the sub frame to be fixed with 18mmm sqm 30 4,268.24 128,047.17

BWP ply to provide a firm base. The complete raised platform shall be firm and stable to the satisfaction of the

Engineer In Charge. The item to include making of the cove/ floating platform with a plywood facia as per

DSR-2019 MARKET

S.No. DESCRIPTION UNIT QTY (DSR DSR AMOUNT MR AMOUNT

Running Lunch counter: To be made out of 19mm thick BWP ply fixed on to wall susing MS angles to make it

stable complete as per design and instructions of the Architect. The top surface and the edges to be finsihed

using Acrylic Solid surface with wrapping around at the edges as per design and approvla of the Architect. The

depth of the counter ot be upto 600mm as per drawings.

SUB TOTAL OF FINISHES

Furniture Works for office of Invest India at New Delhi

S. NO. SPECIFICATION QTY RATE UNIT AMOUNT INDICATIVE IMAGE

1.0 Manufacturing, providing and placing in position machine made factory

assembled workstation (as per finally approved sample by department) of

following specifications:

Frame Work, Partition and Cable management : Frame work shall consist of

main spine and return spine of aluminium extruded section of minimum

thickness of 1.2 mm. The overall thinkness of Panel base System should be 60-

70 mm. The panel will be hollow inside to accommodate wiring for

electrical/data and outer frame of panel should be made of extruded

aluminium.The panel shall be made up of 3 mm thick MDF both sides of the

wooden frame to create the hollow for the wire management.

Finishes of panel above the worktop: Above the top fabric pinup & fabric finsh

with raceway on main spine. The hollow panel made of MDF and 3mm thick

foam which is upholstered with 0.5mm thick fabric. The thickness of partition

panel should be 60-70 mm. Finishes of panel below the worktop: Below the

top the hollow panel should be made of MDF tile and 0.5mm thick steel sheet

pasted on MDF which is powder coated with EPC finish 80-90 microns for

durability on the inside as well on the outside. The thickness of partition panel

should be 55-60 mm between workstations.

The panel outer aluminium frame is designed such a way that it can be easily

slide in to the columns/ Connectors by means of stacking one over the other.

Horizontal race way should be 150-170 mm height aluminium profile.There

shall be complete cable management arrangement with openable raceway

and provision for fitting electrical/data switches and holes for passing cable.

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality

Connectors/ Post Description:

End Post: Aluminium alloy extrusion of 60-70 mm width – 1180-1230 mm height.

One way post: Aluminium alloy extrusion of 60-70 mm width – 1180-1230- 150-

1640MM mm height.

Two way post: Aluminium alloy extrusion of 70-80 mm width – 1180-1230 mm

Three way post: Aluminium alloy extrusion of 90-100 mm width – 1180-1230 mm

Four way post: Aluminium alloy extrusion of 90-100 mm width – 1590-1640 mm

Table top support: 55-65mm width bracket made up of recycle aluminium

extrusion with EPC of 80-90 microns.

Table top to table top connector: Steel 3mm thickness of size - 100-120mm

width and 45-55mm depth, EPC 80-90 microns. Raceway should be made out

of CRCA steel of thickness 2mm duly powder coated.

Powder coating should of 80-90 micron thickness to be provided fitted to the

under structure legs of table. Powder coating should be scratch resistance

(cross hatch test 6x6 grid method).

Worktop :Worktop should be made of minimum 35mm thick MDF with

Maplewood code ADMP-2 with PU polish or any approved shade/colour of

natural veneer of thickness of 0.5-0.6 mm. MDF should be confirming to IS:

14587 grade II & Type II. The exposed edge of worktop shall be secured with

1.2mm-1.5mm thick PVC edge banding tape of approved colour. The height

of Worktop shall be 740-760 mm from ground level. The MDF board should be

E-1 Grade with pvc edge banding.

Drawer Unit : Each workstation should be provided with 3 drawer Metal

pedestal of overall dimensions internal and external dimensions 400-420 mm

(W) x 500-520 mm (D) x 600-620 mm ( H). Drawer should be made of CRCA of

thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal

should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-

Each pedestal should have 5 Nos castor fitted to it where in one castor will be

fitted to lower most drawer to provide extra stability.

Key Board Pull Out Tray : Key Board Pull Out Tray of Dimensions 35-40 mm(H) x

280-300 mm (D) x 550-570 mm (H) made of CRCA steel of thickness 1-1.2 mm,

duly Powder Coated of 60-70 Micron.

1.a Workstation of Cluster of Four Person linear back to back (Size : 1350mm (W) x Each

600mm (D) x 740mm (Worktop Height) x 1200 mm Panel Height. 14 320,906.33 4,492,689.00

1.b Workstation of Cluster of Two Person linear back to back (Size : 1350mm (W) x Each

600mm (D) x 740mm (Worktop Height) x 1200 mm Panel Height. 2 160,453.17 320,906.00

1.c Workstation of Cluster of One Person linear (Size : 1350mm (W) x 600mm (D) x Each

740mm (Worktop Height) x 1200 mm Panel Height. 3 84,449.04 253,347.00

Workstation of Cluster of Two Person linear non-sharing (Size : 1350mm (W) x

1.d 600mm (D) x 740mm (Worktop Height) x 1200 mm Panel Height. 4 168,898.07 675,592.00

Workstation of Cluster of Two Person L-shape non-sharing (Size : 1550mm (W1) x

mm Panel Height.

2.0 CabinTable : Manufacturing, providing and placing in position machine made

factory assembled Table (as per finally approved sample by department) of 2 Nos. 140,692.09 281,384.19

following dimensions with the following specifications.

Cabin table of size: 1800mm (W) 750mm (D) 740(H)mm made of minimum

35mm thick MDF with approved shade of natural Veneer(minimum thickness

of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. And

side storage of size 2650mm (w) 450mm(D) 740mm (H) Made of 19 mm thick

MDF with approved shade of natural Veneer(minimum thickness of 0.5-0.6

mm) with swing doors .The exposed edge of worktop shall be secured with 1.5

mm-2 mm thick PVC edge banding tape of approved colour. The height of

Worktop shall be 740-760 mm from ground level. The MDF board should be E-

1 Grade with pvc edge banding. Top supported on MDF legs & modesty

panel of 35 mm thick MDF with approved shade of natural Veneer(minimum

thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type

II. The exposed edge of panale secured with 1.2mm-1.5mm thick PVC edge

banding tape of approved colour. Each table should have 3 drawer pedestal

made of 25 mm thick MDF with approved shade of natural Veneer(minimum

thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type

II. All hardware shall be of approved make/brand as per sample finally

approved by the department.

3.0 Cabin Table : Manufacturing, providing and placing in position machine

made factory assembled Table of (as per finally approved sample by 1 Nos. 166,083.10 166,083.10

department) of following dimensions with the following specifications.

Cabin table of size: 1900mm (W) 750mm (D) 740(H)mm made of minimum

35mm thick MDF with approved shade of natural Veneer(minimum thickness

of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. And

side storage of size 950mm (w) 550mm(D) 740mm (H) Made of 19 mm thick

MDF with approved shade of natural Veneer(minimum thickness of 0.5-0.6

mm) with swing doors .The exposed edge of worktop shall be secured with 1.5

mm-2 mm thick PVC edge banding tape of approved colour. The height of

Worktop shall be 740-760 mm from ground level. The MDF board should be E-

1 Grade with pvc edge banding. Top supported on MDF legs & modesty

panel of 35 mm thick MDF with approved shade of natural Veneer(minimum

thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type

II. The exposed edge of panale secured with 1.2mm-1.5mm thick PVC edge

banding tape of approved colour. Each table should have 3 drawer pedestal

made of 25 mm thick MDF with approved shade of natural Veneer(minimum

thickness of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type

II. All hardware shall be of approved make/brand as per sample finally

approved by the department.

4.0 Cabin Table : Manufacturing, providing and placing in position machine

made factory assembled Table (as per finally approved sample by 1 Nos. 216,752.52 216,752.52

department) of following dimensions with the following specifications.

Cabin table of size: 1900mm (W) 750mm (D) 740(H)mm made of minimum

35mm thick MDF with approved shade of natural Veneer(minimum thickness

of 0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. The

exposed edge of worktop shall be secured with 1.5 mm-2 mm thick PVC edge

banding tape of approved colour. The height of Worktop shall be 740-760 mm

from ground level. The MDF board should be E-1 Grade with pvc edge

banding. Top supported on MDF legs & modesty panel of 35 mm thick MDF

with approved shade of natural Veneer(minimum thickness of 0.5-0.6 mm)

MDF should be confirming to IS: 14587 grade II & Type II. The exposed edge of

panale secured with 1.2mm-1.5mm thick PVC edge banding tape of

approved colour. Each table should have 3 drawer pedestal made of 25 mm

thick MDF with approved shade of natural Veneer(minimum thickness of 0.5-

0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. All hardware

shall be of approved make/brand as per sample finally approved by the

BACK STORAGE: Size 2100mm (W) X 450mm (D) X 740mm (H) Body made of 19

mm thick MDF with approved shade of natural Veneer(minimum thickness of

0.5-0.6 mm) MDF should be confirming to IS: 14587 grade II & Type II. E1 grade

in veneer finish with zero urea formaldehyde emissions (<or= 8mg/100 g oven

dry board-perforated method) for better in-house quality. Frame

Handles:Extruded Aluminum handles.Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality.

5.0 Meeting Rooms : Manufacturing, providing and placing in position machine

made factory assembled Meeting Rooms Table (as per finally approved

sample by department) of following dimensions with the following

specifications:

Providing & supplying meeting table where, Table top and understructure

should be made of minimum 35mm thick MDF with approved shade of natural

Veneer (minimum thickness of 0.5-0.6 mm) MDF should be confirming to IS:

14587 grade II & Type II. The exposed edge of worktop shall be secured with

1.5 mm-2 mm thick PVC edge banding tape of approved colour. The height

of Worktop shall be 740-760 mm from ground level. The MDF board should be

E-1 Grade with pvc edge banding. Veneer Flipper with wiring tray made of

1.5-2 mm thick CRCA duly powder coted of 60-70 micron with housing

supported on MDF Veneer legs made of minimum 35mm thick MDF with

approved shade of natural Veneer(minimum thickness of 0.5-0.6 mm) MDF

should be confirming to IS: 14587 grade II & Type II. The exposed edge of

worktop shall be secured with 1.5 mm-2 mm thick PVC edge banding tape of

approved colour. The modesty panel should be provided with 19 mm thick

MDF confirming to IS: 14587 grade II & Type II and finished with natural veneer

of 0.5-0.6 mm thick. The height of podesty panel should be 600 mm. All

hardware shall be of approved make/brand as per sample finally approved

by the department. Product should be BIFMA gold rated SCSglobal certified

for inhouse air quality.

5.c Round Table: 900mm Dia x 740(H)mm, 2 Nos. 44,476.49 88,952.98

6.0 Manufacturing, providing and Placing sofa for Lobby/Cabins/Meeting Room

(as per the sample finally approved by the department).

Providing & placing sofa for Lobby/Cabins/Meeting Rooms . Wooden structure

of sofa to be fabricated using good quiality hardwood duly seasoned and

applying anti-termite paint of approved brand & manufacture to ensure

stability of the frame, On the wooden base frame of the sofa to be provided

with M.S. helical spring, sides & back with jute strips, with polyfill covered with

jute & finished with thick marking cloth before doing final finished with

Leatherite. Sofa to be fully upholstered using approved Leatherite of A grade

of desired shade duly embossed including providing & fixing of all other

related materials including hardwares etc. have basic cost not less than

1000/- Pet Mt. Seat - 30-32Kg/cum density PU Foam, 100mm thick, Back -

32Kg/cum density PU foam, 60mm thick, Sides (inside) - 32 Kg/cum density PU

Foam, 45 mm thick Sides (outside) & back (back side) - 32 Kgcum density PU

foam, 25mm thick. Seat shall rest on SS square frame of size 25mm x 25mm

supported be legs made of 25mm x 25mm square SS section of height 225mm.

All SS work should be in grade 304. Base of sofa should be infilled with suitable

woode sections so as to give proper support to the seat. Height of the base of

sofa shall be 200-250mm(approx). Finished width of arm shall be 100mm after

upholstery work. Sofa to be fully upholstered using approved leathrite of

desired shade duly embossed including providing & fixing of all other related

materials including hardwares etc. complete as directed by the Engineer in

charge.Product should be BIFMA gold rated SCSglobal certified for inhouse air

6.a 3 SEATER SOFA of Size - 1930mm W x 740mm D x 670mm H 2 Nos. 64,744.26 129,488.52

2 SEATER SOFA of Size - 1380mm W x 740mm D x 670mm H 3 Nos. 46,165.47 138,496.42

1 SEATER SOFA of Size - 800mm W x 740mm D x 670mm H 5 Nos. 26,460.70 132,303.49

Manufacturing, providing and placing in position machine made factory

assembled STORAGE of (as per finally approved sample by department) of

following specifications:

Manufacturing, providing and placing in position machine made factory

assembled storage (as per finally approved sample by department). The

dimensions of storages should be made of 19 mm MDF with approved shade

of natural Veneer (minimum thickness of 0.5-0.6 mm) MDF should be

confirming to IS: 14587 grade II & Type II.

The storages should have shelves made up of 19 mm MDF with approved

shade of natural Veneer (minimum thickness of 0.5-0.6 mm) MDF should be

confirming to IS: 14587 grade II & Type II.

The exposed edge of worktop shall be secured with 1.5 mm-2 mm thick PVC

edge banding tape of approved colour. All hardware shall be of approved

make/brand as per sample finally approved by the department.

.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

8.0 Manufacturing, providing and placing in position high back Chair, Revolving

type, with head rest for Cabin (as per the sample finally approved by the 4 Nos. 35,581.19 142,325.00

Chair seat made up of insert moulded Polyurethane Foam upholstered with

foam laminated mesh fabric, insert moulded foam assembled over a load

bearing plastic seat cover, back is made up of two piece injection moulded

frame, inner frame upholstered with mesh fabric and mounted on the main

assembly, back adjustable lumbar support for achieving comfortable seating

posture, seat size 44.5 - 52.5 cm depth (approx.), 46.4 - 51.0 cm width

(approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective

back height from Seat - 57 cm (approx.), polyurethane foam for seat having

density 65±4 kg/m3, armrest top injection moulded in polyurethane and

mounted on the injection moulded height adjustable type armrest, armrest

height adjustable up to 4.5 cm (approx) in 3 steps & width movement

adjustable, 360 degree revolving type. mechanism, single point control for

seat and back adjustment, front pivot for tilt, tilt adjustment for back in

3position locking with antishock feature, pneumatic height adjustment of 8.5

cm spine bracket made of aluminum die cast piece connecting to back with

mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin

wheel castors (castor wheel dia. 6.0 cm approx.), base pedestal dia 65.0cm

(approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors

injection moulded in Nylon etc. all complete as per manufacturers

specification, approved sample and direction of Engineer-in-Charge..Product

should be BIFMA gold rated SCSglobal certified for inhouse air quality .

Approved Makes: Rockworth

9.0 Manufacturing, providing and placing in position Visitor Chairs for Cabin (as

per the sample finally approved by the department).

Providing & Supplying medium Back chairs for . Chair seat made up of insert

moulded Polyurethane Foam upholstered with foam laminated mesh fabric,

insert moulded foam assembled over a load bearing plastic seat cover, back

is made up of two piece injection moulded frame, inner frame upholstered

with mesh fabric and mounted on the main assembly, back adjustable

lumbar support for achieving comfortable seating posture, seat size 44.5 - 52.5

cm depth (approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size

55.5 cm- 62 cm height. (approx.), effective back height from Seat - 57 cm

(approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top

injection moulded in polyurethane and mounted on the injection moulded

height adjustable type armrest, armrest height adjustable up to 4.5 cm

(approx) in 3 steps & width movement adjustable, 360 degree revolving type.

mechanism, single point control for seat and back adjustment, front pivot for

tilt, tilt adjustment for back in multi position locking with antishock feature,

pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die

cast piece connecting to back with mechanism, pedestal made of

aluminium die cast fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0

cm approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0

cm with castors, twin wheel castors injection moulded in Nylon etc. all

complete as per manufacturers specification, approved sample and

direction of Engineer-in-Charge. Chair should be SGS Gold BIFMA Certified

10.0 Manufacturing, providing and Placing High Back revolving chairs for Meeting

Rooms/Conference Room (as per the sample finally approved by the 48 Nos. 22,122.27 1,061,869.00

Chair seat made up of insert moulded Polyurethane Foam upholstered with

foam laminated mesh fabric, insert moulded foam assembled over a load

bearing plastic seat cover, back is made up of two piece injection moulded

frame, inner frame upholstered with mesh fabric and mounted on the main

assembly, back adjustable lumbar support for achieving comfortable seating

posture & seat depth adjustment.Armrests should be adjustable with 120-160

mm adjustability with PU padded. Base: Black nylon base with nylon castors.

Chair should be of 360 degree swivel Posture Control with multi pointer locking

and synchro tilt mechanism and hydraulic gas lift gas lift to allows 90-100 mm.

of height adjustment. Seat size 440 - 550 mm depth, Seat width of 530-550 mm

Seat Height of 420-510mm with hydraulic height adjustability of 90-100mm. Sub

assembly back size 550 - 620 mm height. Effective back height from Seat -

570mm, polyurethane foam for seat having density 65-70 kg/m3. Pedestal

made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60-

70 cm), base pedestal dia 60-70 mm and pitch center dia. 700-720mm with

castors, twin wheel castors injection moulded in Nylon etc. all complete as

per manufacturers specification, approved sample and direction of Engineer-

in-Charge. .Product should be BIFMA gold rated SCSglobal certified

for inhouse air quality .

11.0 Manufacturing, providing and Placing Medium Back revolving chairs for

Staff/Workstations/Pantry (as per the sample finally approved by the 95 Nos. 19,464.94 1,849,169.00

Chair seat made up of insert moulded Polyurethane Foam upholstered with

foam laminated mesh fabric, insert moulded foam assembled over a load

bearing plastic seat cover, back is made up of two piece injection moulded

frame, inner frame upholstered with mesh fabric and mounted on the main

assembly, back adjustable lumbar support for achieving comfortable seating

posture & seat depth adjustment.

Armrests should be adjustable with 120-160 mm adjustability with PU padded.

Base: Black nylon base with nylon castors.

Chair should be of 360 degree swivel Posture Control with multi pointer locking

and synchro tilt mechanism and hydraulic gas lift gas lift to allows 90-100 mm.

of height adjustment. Seat size 440 - 550 mm depth, Seat width of 530-550 mm

Seat Height of 420-510mm with hydraulic height adjustability of 90-100mm. Sub

assembly back size 550 - 620 mm height. Effective back height from Seat -

570mm, polyurethane foam for seat having density 65-70 kg/m3. Pedestal

made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60-

70 cm), base pedestal dia 60-70 mm and pitch center dia. 700-720mm with

castors, twin wheel castors injection moulded in Nylon etc. all complete as

per manufacturers specification, approved sample and direction of Engineer-

in-Charge.Product should be BIFMA gold rated SCSglobal certified for inhouse

12.0 Manufacturing, providing and Placing centre table (as per the sample finally

approved by the department). 5 Nos. 21,393.76 106,969.00

Providing and fixing tables of Size - 1200mm W x 600mm D x 350mm H whose

topshould be made of minimum 25mm thick MDF with Maplewood code

ADMP-2 with PU polish or any approved shade/colour of natural veneer of

thickness of 0.5-0.6 mm. MDF should be confirming to IS: 14587 grade II & Type

II. The exposed edge of worktop shall be secured with 1.2mm-1.5mm thick

PVC edge banding tape of approved colour. The MDF board should be E-1

Grade with pvc edge banding. The understructure is made of SS CHROME

BASE. All SS work should be in grade 304. Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality . Rockworth make Liberty centre

14.0 Manufacturing, providing and placing in position machine made factory

assembled Locker Unit (as per finally approved sample by department)

Overall size of 4 - Door PLU + Lkr (Base) shall be 500mm(W) x 450mm(D) x

1830mm(H). 4 Sheets(Cam Lock). Sheets(Hasp.) Stack ability shall have add -

on units that can be stacked width wise to form bank of lockers having

common side panel.

Locking shall have 10 Lever cam lock with lock lever plus option of hasp

Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid

Knockdown construction, shelf shall be uniformly distributed load capacity per

each shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder

coated to the thickness of 80-90 microns. Handle/Label holder shall be

Aesthetically appealing Snap fit ABS plastic handle. Ventilation shall be

attractive punched pattern for ventilation. Material thickness is 0.6 mm.

Dining Chair: Manufacturing, providing and placing in position Café Chair (as

per the sample finally approved by the department).

Providing and fixing Cafe chair of Size - 400mm (W) x 500mm (D) x 830mm (H).

Seat / Backrest: Polypropylene plastic (PP) injection in a specific design.

Base: Bended pipe steel with chrome plated base.The understructure is made

of SS CHROME BASE. Product should be BIFMA gold rated SCSglobal certified

for inhouse air quality.

16.0 Café Table: Manufacturing, providing and placing in position Café Table (as

per the sample finally approved by the department).

Providing and fixing cafe tables of Size - 1600mm (W) x 900mm (D) x 740mm

(H), whose top is made of HPL Grade E-1(Environmental Friendly), thickness

25mm cover with Melamine, Edge banding (PVC) 2mm. E1 grade laminate

with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-

perforated method) for better in-house quality. The understructure is made of

SS CHROME BASE. All SS work should be in grade 304. All complete as per

direction of Engineer-in-Charge.

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

Providing and fixing cafe tables of Size - 900mm (W) x 900mm (D) x 740mm (H),

whose top is made of HPL Grade E-1(Environmental Friendly), thickness 25mm

cover with Melamine, Edge banding (PVC) 2mm. E1 grade laminate with zero

urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated

method) for better in-house quality. The understructure is made of SS CHROME

BASE. All SS work should be in grade 304. All complete as per direction of

Engineer-in-Charge.

Product should be BIFMA gold rated SCSglobal certified for inhouse air quality.

COMPACTOR: Manufacturing, providing and Placing Compactor (as per the

sample finally approved by the department).

Supplying and fixing in position Compactor Single Static Bay Push Pull Typeof

following specifications: Overall Dimensions of cluster shall be 950mm(W) x

450mm(D) x 2200-2250mm (H). The Construction shall be Welded Construction

sheet tickness is 0.8 mm for back & shelves and 0.9 mm for sides & top . Finish

shall be Epoxy polyester powder coated thickness of 80-90 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 Uniformly

distributed load capacity of 60-70 Kg . Undercarriage shall have construction

in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 .

Finish shall be epoxy polyester powder coat of approved color & shade with

a dry film thickness of minimum 80-90 microns . The movements of the system

shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units

achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm

thick plate (mounted on each double & single movable units) & rigidly fixed

at suitable height on body side . Each movable undercarriage has 4 nos. of

antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball

bearings for guiding between channels & 'J' section . Fittings shall be

centralized locking arrangement through locking stiffener mounted onto back

of single last unit so that it gets locked on channels when all the units are

brought together .

The Recess handle lock should be up of hettich/hafele make & placed at

suitable height . This arrangement occupies a space of 90.0 mm . When the

last unit is twin movable , hinged doors are provided for the end bodies, so in

this case locking stiffener is mounted onto drive unit cover ; and with tile fascia

option , it will be mounted in the recess of vertical trim . Each Drive Type units

shall have Locking Knob near the drive wheel for manual locking of individual

units when a person is using those units . Knob shall be rotated to unlock

position when units are to be moved . End stoppers shall be provided to

prevent derailment . Door locking shall be having hinged doors of recessed

die cast handle cum lock giving 3 way locking through a lever & shooting

bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square

bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label

holder shall be made from 2 mm thick clear transparent acrylic sheet. Also

total no. of loading levels per understructure shall be 5 for SS1.

Manufacturing, providing and Placing Lounge Chair for Breakout area (as per

the sample finally approved by the department).

Wooden structure of lounge Chair to be fabricated using good quiality

hardwood duly seasoned & manufacturer to ensure stability of the frame, On

the wooden base frame of the lounge chair to be provided, sides & back of

moulded Polyurethane Foam & finished with thick marking cloth before doing

final finished with fabric have basic cost not less than 1500/- Pet Mt. Seat - 35-

40Kg/cum density PU Foam, 100mm thick, Back - 35Kg/cum density PU foam,

60mm thick, Sides (inside) - 35 Kg/cum density PU Foam, 45 mm thick Sides

(outside) & back (back side) - 35 Kgcum density PU foam. Seat shall rest on

solid teak wood of height 350-400mm. Seat hall be upholstered with fabric.

Height of the base of lounge chair shall be 350-400mm(approx). Finished width

of arm shall be 100mm after upholstery work. Lounge chair to be fully

upholstered using approved Fabirc of A grade of desired shade duly

embossed including providing & fixing of all other related materials including

hardwares etc. complete as directed by the Engineer in charge. Product

should be BIFMA gold rated SCSglobal certified for inhouse air quality.

Manufacturing, providing and Placing Table for breakout area(as per the

sample finally approved by the department).

Providing and placing center table of size 750mm dia and height 450mm

Worktop Made of 25mm thick E-1 grade particle board finished with 2mm PVC

edge banding. E1 grade laminate with zero urea formaldehyde emissions

(<or= 8mg/100 g oven dry board-perforated method) for better in-house air

quality. This should comply with (EN 120-1992). The exposed edge of worktop

shall be secured with 2mm thick PVC edge banding tape of approved colour.

Understructure made solid wood of 25-30mm dia. Product should be BIFMA

gold rated SCSglobal certified for inhouse air quality.

Providing and fixing Bar Stool of Overall Size - 470mm (W) x 457mm (D) x

777mm (H). Seat : 12mm thick veneer in a specific design with HPL solid colour

and texture with E0 glue.

Base: Bended pipe steel with Double nickel chrome steel base.The

understructure is made of SS CHROME BASE. Product should be BIFMA gold

rated SCSglobal certified for inhouse air quality.

TOTAL (INR) 13,959,194.54

Sr.No DSR No. Description Unit Quantity Unit Rate DSR Amount NDSR Amount

A VARIABLE REFRIGERANT FLOW SYSTEM

1.0 VRF/VRV OUTDOOR UNIT

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable

for cooling and heating, having all hermetically sealed inverter type Scroll

Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with

1.1 R410A Refrigerant, vibration isolators, with suitable foundation etc. complete as Per HP 28 16,415.00 459,620.00

required.The unit shall deliver the rated capacity at AHRI Conditions and work

even at 50°C ambient temperature without tripping.The unit shall be suitable to

work on 400V+/-10%, 3 Phase, 50Hz AC power supply.The unit shall be filled

with first charge of the refrigerant and ready for use as required.The COP at

AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following minimum capacity 4-

wayflow VRV/ VRF Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan/ dynamically

balanced blower, multi speed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cordless remote control etc., suitable for operation on single phase

2.1 230V±10%, 50 HzAC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from

BMS System. The cooling capacity of indoor unit will be at air inl et conditions

of 27 Degree CD Band 19 Degree CWB temperature.

4-Way Cassette type

3.0 THERMOSTATS

SITC of room thermostats having a digital display showing temperature/relative

MR humidity. Ref. tender specification for detail description. Nos 10 4,437.87 44,378.71

4.0 MR Corded Remote controls Nos 2 3,892.48 7,784.96

5.0 MR Communication cable (1.5 sqmm X 2 Core) Rmt 800 138.98 111,180.35

CENTRAL REMOTE CONTROLLER

Supply,installation,testing and commissioning of central remote controller for the

6.0 MR control and monitoring of IDU and Outdoor unit. The unit shall have Lot 1 84,669.91 84,669.91

BACnet/MODBUS protcol so that it can combine with BMS System.

Supply, installation, testing and commissioning of MS fabricated outdoor unit

stand for placing outdoor unit of VRV system. The stand shall be manufactured

7.0 MR from MS C channel of minimum 3-4 mm thick. It shall be finished with enamel No 4 4,414.51 17,658.06

paint as per client/architect approval.

8.0 REFRIGERANT PIPING

Supply,Installation,testingandcommissioningincludingvaccumiazationandNitroge

ntestingoffollowingnominalsizesofsoft/harddrawncopperrefrigerantpipingforVRV

/VRFsystem,completewithfittings,withsuitableadjustableringtypehangersupports,j

ointing/brazingincludingaccessories,insulatedwithXPLEClass-

Otubularinsulation/withClass-

Oclosedcellelastometricnitrilerubbertubularsleevessectionsofspecifiedthicknessas

givenbelowforSuctionandLiquidlines,allaccessoriesasperspecifications etc. as

8.1 5.10 34.9 mm O.D (wall Thickness-1.2 mm) (Insulation: 19 mm) Rmt 94 1,230.00 115,718.40

8.2 5.8 28.6 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 71 1,108.00 78,180.48

8.3 5.6 22.2 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 47 865.00 40,689.60

8.4 5.5 19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 59 707.00 41,571.60

8.5 5.4 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) Rmt 45 588.00 26,671.68

CABLE TRAY FOR REFRIGERANT PIPING

Supplying and installing of following size of perforated hot dip galvanized G.I

cable tray with perforations not more than 17.5%, in convenient sections, joined

MR with connectors, suspended from ceiling with G.I suspenders including bolts and

nuts, etc. for carrying refrigerant pipe in outdoor application as required.

9.1 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 50 1,033.56 51,677.84

9.2 225mm width x 50 mm depth x 1.6 mm thickness Rmt 30 744.16 22,324.83

10 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with

fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and

accessories as per specifications, drawings.

B AIR DISTRIBUTION SYSTEM

1.0 GSS DUCT (Factory Fabricated Duct)

Supply, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/round ducting complete with neoprene rubber gaskets,

16.12.1 elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings

and specifications of following sheet thickness complete as required.

GSS DUCT (Site Fabricated Duct)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet

metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,

2.0 16.12.2 splitter dampers, vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness complete as required.

3.0 Supply Air Grilles

Supplying & fixing of powder coated extruded aluminium Supply Air Grilles

with Aluminium volume control dampers of various sizes and as per

specifications and approved drawings and schedules.

4.0 Return Air Grilles

Supplying & fixing of powder coated extruded aluminium Return Air Grilles

16.16 with louvers but without volume control dampers of various sizes and as per Sqmt 15 5,507.00 82,605.00

specifications and approved drawings and schedules.

5.0 EXHAUST AIR GRILLES

Supplying, Installing, testing, balancing & fixing of powder coated extruded

MR aluminium Exhaust air Grills of various sizes and as per specifications and Sqmt 10 3,561.98 35,619.76

approved drawings and schedules

6.0 EXHAUST/FRESH AIR LOUVERS

Supplying, Installing, testing and commissioning of powder coated extruded

aluminium exhaust air louvers with min.60 % free area, with metallic frame

work & fixing accessories, to be fixed on external wall to exhaust air from

MR basement area to ambient , it shall be suitable for exhausting required air in CFM Sqmt 2 5,255.37 10,510.75

. Louvers need to be suitable in order avoid rain water entry in to basement @ 15

degree deflection with bird screen complete as per specification approved

drawings and schedules.

7.0 Supply Air Diffusers

Supply , installation , testing and commissioning of supply air diffusers of

Powder coated Aluminium with Aluminium volume control dampers with anti

16.17 smudge ring and removable core. Diffusers shall be as per specification & the Sqmt 5 11,363.00 56,815.00

sizes will be as per drawings and schedules :

8.0 Return Air Diffusers

Supply , installation , testing and commissioning of return air diffusers of

Powder coated Aluminium without volume control dampers with anti smudge

16.18 ring and removable core. Diffusers shall be as per specification & the sizes Sqmt 5 7,559.00 37,795.00

will be as per drawings and schedules :

9.0 VOLUME CONTROL DAMPER

Supplying, installing, testing & commissioning of GI volume control damper

with minimum 1.6 mm flange and 1.8 mm blade thickness within ducts to be

16.13 provided with suitable links, levers and quadrants for manual control of volume Sqmt 4 6,500.00 26,000.00

of air flow and for proper balancing of the air distribution system as per

schedules & drawings.

10.0 COLLAR DAMPER

Supplying, installing, testing & commissioning of GI collar damper with

minimum 1.6 mm flange and 1.8 mm blade thickness within ducts to be

MR provided with suitable links, levers and quadrants for manual control of volume Sqmt 1 5,056.84 5,056.84

of air flow and for proper balancing of the air distribution system as per

schedules & drawings.

11.0 Motorised Volume Control Damper

Supply, installation, testing and commissioning of motorised(ON/OFF Type)

duct mounted opposed blade G.I volume control damper with enthalpy sensor

16.14 and necessary control wiring (minimum 1.5 sqmm ) for integeration within IDU

room.The unit shall provided as shown in the drawings. The unit shall be capable

to communicate with BMS system.

12.0 Fire Damper

Supplying, Fixing,testing and commissioning of fire damper in supply air

duct/main branch and return air path as and where required of required sizes i/c

control wiring, the damper shall be motorized and spring return so as to close the

16.20 damper in the event of power failure automatically and open the same in case of

power being restored. The spring return action shall be inbuilt mechanism and

not externally mounted. the damper shall also be closed in the event of fire signal

complete as required and as per specifications.

12.2 16.20.2 Actuator (Rated torque-10 N.m/m2) Each 2 9,212.00 18,424.00

13.0 Back Draft Damper/Gravity Damper

Supplying, Fixing,testing and commissioning of Extruded aluminum of

Minimum 0.050 inch (1.2 mm) thick backdraft damper with extruded aluminum

blades suitable for application in HVAC systems with velocities to 1,500 feet per

MR minute (305 m/min). The damper shall withstand -10 to 60 degree celsius Sqmt 0.5 5,255.37 2,627.69

temperature. Maximum back pressure of 6" w.g., Minimum air velocity of 1500

fpm.The damper shall be complete as required and as per specifications.

C INSULATION & ACOUSTIC

1.0 DUCT INSULATION

Supply and installation of cross linked closed cell Oxide Acetate Foam Thermal

insulation on ducts having density 0f 30 to 33 Kg/ M³ ,having K value 0.029

W/m ° K at 40°C Deg temp and temp range of -70°C to +100°C and fire rating

MR Class O as per BS 476 Part 6 from CBRI,Roorkee as per the approved

specifications. Smoke & Toxicity index of material shall be passed as per IMO

MSC 307 ( 88 ) 2010 Anexx 1 Pt 2.• Material shall be CFC/ HCFC free as per

13mm thick insulation oxide acetate foam laminated with aluminium foil for

supply air duct

9 mm thick insulation oxide acetate foam laminated with aluminium foil for

1.2 Return air duct Sqmt 200 414.59 82,918.12

2.0 MR DUCT ACOUSTIC LINING

Supply and installation of cross linked open cell acco isolate acoustic insulation

for duct having density of 30 to 55 Kg/ M³ ,having K value 0.029 W/m ° K at

40°C Deg temp and temp range of -70°C to +100°C and fire rating Class O as

per BS 476 Part 6 from CBRI,Roorkee as per the approved specifications.

Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 )

2010 Anexx 1 Pt 2.• Material shall be CFC/ HCFC free as per US EPA 5021

2.1 25mm thickacco isolate acoustic open cell insulation Sqmt 450 642.32 289,045.56

3.0 MR DOUBLE LAYER CANVAS CONNECTION

Supply,Installation,testing and commissioning of double Layer canvas

connection fire retardant cloth for the end connection of Ductable Units/AHUs

and Ventilation fan to reduce the vibration.It shall be fire rated for atleat 2 hrs. Nos. 4 2,779.51 11,118.04

Refer tender specification for detail description

D VENTILATION SYSTEM

Supply , installation , testing and commissoning , of duct mounted inline fans

complete with direct driven centrifugal fan , TEFC squirrel cage induction motor

, with efficiency class IE-3 whichever is higher , direct drive arrangement , heavy

1.0 MR gauge sheet metal casing , rubber isolator mounts and other accessories.The fan

shall be complete in all respect and should match the specification ,Drawings

and Schedule. Inline fans shall be of following capacities.

1.1 1100 CFM (15 mm Static Pressure) Nos. 1 16,677.05 16,677.05

2.0 MR CEILING MOUNTED EXHAUST FANS

Supply , installation , testing and commissoning , of ceiling mounted inline fans

complete with direct driven centrifugal fan , direct drive arrangement , heavy

gauge sheet metal casing , rubber isolator mounts and other accessories.The fan

shall be complete in all respect and should match the specification ,Drawings

and Schedule. Inline fans shall be of following capacities.

3.0 MR PROPELLER FANS

Supply , installation , testing and commissioning of propeller type fan with

Aluminium/Plastic blade and complete with induction Motor suitable for

operation with 230 V single phase 50 Hz with suitable frame etc. as per IS:2312-

1967 with gravity dampers for exhaust complete as per specifications and

drawings. Noise level should not exceed 45dB(A) @3m.The fan shall be

complete in all respect and should match the specification ,Drawings and

Schedule.system.

Supplying, fixing, testing commissioning of 2TR Hi wall splits (1 W+1S)

4.0 MR complete with interlocking for one working & other standby complete with set 1 121457.53 121,457.53

timmer for equal run, stabilizer, ref. piping, etc as required - for server room.

TOTAL HVAC WORK AMOUNT 2,081,860.44 1,303,136.49

Office of Invest India at New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION MR (AMOUNT)

A SANITARY FIXTURES & FITTINGS 2,316,700.97

B WATER SUPPLY 154,002.55 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 943,978.65 0.00

D SPRINKLER PIPING & ACCESSORIES 1,127,275.00 165,163.55

Total Cost ( Carried Forward) in Rs. 4,707,120.72

Office of Invest India at New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

NS Rate NS Amount DSR -

S. NO. DESCRIPTION OF ITEMS UNIT Qty Rate Amount

1.1 Providing and fixing white vitreous china clay wall mountedEuropean type Water Closet

(EWC) with dual flush concealed cistern of approved make, of approved shade including

matching shade of plastic seat and lid cover, fittings, connectors, necessary hanging

arrangement, rubber buffers etc. including cutting and making good the wall and floors NS

wherever required, making connections to soil / vent pipe etc., complete in all respects

inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per

specifications and direction of Engineer-in-Charge.

For supply,installation,testing & commissioning of sanitary fixtures as per above details.

1.3 Providing and fixing glazed vitreous China Oval wash basin of 560x410 mm size of approved

make with MS or CI brackets painted white, C.P. brass chain with rubber plug, 32 mm CP

brass waste coupling of standard pattern, 32 mm CP brass bottle trap and union, 32 mm dia

C.P. pipes to wall flange etc. including cutting and making good the walls & floors where

required complete in all respects inclusive of cost of all required fittings, fixtures, materials,

labour, tools, tackles etc. as per specifications and direction of Engineer in Charge

For supply,installation,testing & commissioning of sanitary fixtures as per above details.

1.4 Providing and fixing CP Central hole single lever wash basin mixer with tuchfree senser

& popup waste system with 2 nos. 10 mm dia. 450mm long copper pipes and brass nuts, size

15mm. (Ref. Jaquar Cat. no. FLR-5051B make or approved equivalent) including cutting and NS

making good the walls where required complete in all respects as per direction of Engineer-in-

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 8 11,466.55 91,732.42

Providing and fixing stainless steel sink of approved make with 40mm dia CP brass waste

coupling of standard pattern, CP brass chain & plug, 40 mm dia PVC waste, CP grating

including fixing under counter top, cutting and making good the walls & floors where

required complete in all respects inclusive of cost of all required fittings, fixtures, materials,

labour, tools, tackles etc. as per specifications and direction of Site Engineer.

a) Stainless steel sink single bowl with drain board of overall size 510mmx1040mm, 250mm

1.5 Providing and fixing ivory coloured vitreous china flat back urinal basin approved make with

auto sensor flushing system with built in sensor including spreader, all fittings, brackets for

wall fixing, connection pipe, waste pipe etc. for individual urinal including cutting and making

good the walls and floors wherever required etc., complete in all respects inclusive of cost of

all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and

direction of Site Engineer.

For supply,installation,testing & commissioning of sanitary fixtures(white colour) as per above Each 8 27,965.63 223,725.04

Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Model) with

450mm long Copper Pipes & Brass Nuts.CP brass wall flange

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 1 5,068.98 5,068.98

1.8 Providing & fixing toilet paper holding including cutting and making good the walls. NS

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 8 1,785.54 14,284.29

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid and brackets fixed

to wooden cleats with C.P. brass screws.

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 4 3,667.34 14,669.36

1.10 Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass screws NS

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 8 617.25 4,938.01

Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate glass complete

with 6mm thick marine ply sheet ground fixed to wooden cleats with CP brass screws and NS

washerswith 40 mm wide teak wood frame as per design including polishing

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Sqm 8 2,175.77 17,406.13

1.12 Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC tube and wall

hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 8 1,651.68 13,213.47

1.13 Providing & fixing, testing and commissioning of storage type electric water heater with

automatic thermostatic control electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete including cutting and making good

the walls wherever required.

25 litres capacity (Horizontal /Vertical type1.5 kw electrical load).

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 4 17,927.18 71,708.72

1.15 Providing & fixing wall mounted 25 mm dia Stainless steel coated grab bar including cutting

& making good the walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 4 1,029.47 4,117.88

Providing & fixing 15 mm dia C.P. brass bib cock with Hose union of approved quality. NS

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 8 1,282.79 10,262.34

Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of approved quality. NS

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 8 1,599.45 12,795.56

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of Fragrance Dispenser

machine complete with refill can and 'C' size battery (2 Nos) for operation fixed to wooden NS

cleats with CP brass screws

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 4 4,676.65 18,706.58

Providing and fixing of stainless steel finish Paper Towel Dispenser having capacity of 300-

350 paper towels fixed to wooden cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary fixtures as per above details. Each 4 4,938.92 19,755.69

1.20 Supply, installation, testing and commissioning of following accessories complete as per

approval and directions of engineer-in-charge.

a Supply and fixing of hand free water fountained with casecaded RO system complete witt all

accessoried Standard Features Hands-free QUASAR with mercury-free UVC-LED treatment

at the dispense point Waterways are Lead-Free in materials & construction Flexible one-piece

water saver bubbler guard infused with silver based antimicrobial additive Stainless steel top

and heavy duty galvanized steel frame High efficiency cooling system and refrigerant R-134a

Four antimicrobial copper push pads per fountain External stream height adjustment on the

drinking fountain Built in filter monitor and bottle counter VersaFilter II is certified to

NSF/ANSI 42 and 53 Suitable storage tank ofstandard manufacturer

b Fully automated stainless steel shoe shining machine with a minimum power rating of 40W

and having a speed of 1400RPM with a 15 second time protection. The machine to have a

polish storage capacity of 200ml. The overall dimentions to be 370mm X 370mm X 1200mm nos 4 21,432.24 85,728.95

c Floor standing hand sanitization panel finished in stainless steel. The overall dimension to be

1350mm(h) X 216mm X 187mm (minimum). The panel to be provided with infrared sensor

based automatic hand sanitizer dispensers with a minimum capacity of 1000ml. nos 4 46,470.95 185,883.79

Electronically controlled automatic (with infrared sensor) soap dispenser with soap refill and

mechnism under the counter. The unit shall be mirror finished chrome plated.

Multi function recessed panel with automatic paper dispenser, hand dryer and waste recepticle.

The entire unit to be in stainless steel finish. The auto roll towel dispenser to have infrared nos 4 81,166.62 324,666.47

sensor. The stainless steel waste container to have a minimum capacity of 23 litres.

Providing & fixing below counter installation type Drinking Water R.O. unit with micron

filtration pre-treatment unit, skid mounted R.O. module with pressure pump and pressure tank,

6 m long food grade PP permeate line including connection to drinking water cooler, Coffee

machine, complete in all respects. (cap - 25L)

Supply and Installation of modular WC cubicles of width and depth as per specifications/

drawings. Cubicle height to be upto 2100 mm.

Made from solid grade compact high pressure laminate as per IS:2046 manufactured under

high specific pressure > 5 MPa and temperature >120oC with bunch of kraft papers

impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose

fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion,

heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties.

Panels have a black core that when machined, presents a distinctive black edge. Panel

thickness 12 mm. Design no. as specified by Arch. / Engr. in suede finish. Size of panels to be

as per drawing and verified as per site.

HARDWARE & ACCESSORIES

• Rectangular head frame structure made from Stainless steel grade 304. Surface finish to be

brush type. A thin plastic film pasted for surface protection.

Size to be 55mmx42mmx1.6 mmT.

Corner joinery section made from Stainless steel grade 304. Surface finish to be brush type. A

thin plastic film pasted for surface protection. Size to be 35mmx15mmx0.8 mmT.

Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish

to be brush type. A thin plastic film pasted for surface protection. Size to be 21mmx16mmx0.8

• Adjustable Palm Design Pedestal Footing of base diameter 64 mm made from Stainless steel

grade 316 giving a clearance height of 150 mm. Surface finish to be matt type.

• Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt

type. Covers to be lacquer coated.

• Conical shape Coat hook with rubber stopper made from Stainless steel grade 304. Surface

finish to be matt type.

• Round Door knob diameter 30 mm with grooves for better hand grip made from Stainless

steel grade 304. Surface finish to be matt type.

• Rotating Thumb-turn locking system with privacy indicator made from Stainless steel grade

304. Surface finish to be matt type.

• Anti-noise rubber padding of thickness 2 mm and width 10 mm

• Stainless steel grade 304 screws.

• Anti-rotation Nylon polyamide grade-6 expandable wall plugs.

Partition system made out of Aluminium Extrusions around 2mm thick and anodised around

15 micron.Size 25x45mm at top and bottom .The Partition to have vertical portals to house the

service cable.The portals to be on the door side as well as on the corner and junction with solid

The wall starter shall be 105/more x105mm/more.The partition sections to be suitale to be

clubbed with any type of door frame and door shutter(Sliding or hinged door). The sections to

be stable enough to accept glass thickness 10mm toughened glass also.The partition sections to

be available in anodized finish in any RAL color as approved by the architects.The Partition

should be demountable and easy to install and maintain.The glass joints to be finished with

matching aluminium alloy I,T and corner sections suitable for 10mm thick toughened

glass.Color of frames: Matt black /Andonised finish.

Cubicles: Std Sizes (W x D x H)- 900 mm x 1550 mm x 1980 mm ( Height is including 150

mm gap from bottom) Door Size- 600 mm

Detail of Sanitary fixture are for the information of the Contractor,however model/makes of all

sanitary fixtures shall be selected by Architect/Interior designer/Project manager and the same

shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of sanitary fixtures.

Contractor to receive all the above mentioned items & store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 2,316,700.97

SUB HEAD B: WATER SUPPLY

S. NS Rate DSR -

DESCRIPTION OF ITEMS UNIT Qty Rate DSR Amount (Rs) Amount

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all (CPVC) plain & brass threaded fittings

1 including fixing the pipe with clamps at 1.00 m spacing. This 18.7

including jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per

direction of engineer in charge. .

Internal Work - Exposed on Wall

20 mm nominal outer dia pipes. Metre 90.00 306.95 27625.50 18.7.2

25 mm nominal outer dia pipes. Metre 54.00 369.20 19936.80 18.7.3

32 mm nominal outer dia pipes. Metre 27.00 480.55 12974.85 18.7.4

40 mm nominal outer dia pipes. Metre 9.00 648.60 5837.40 18.7.5

50 mm nominal outer dia pipes. Metre 9.00 903.50 8131.50 18.7.6

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00 m spacing. This including

jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good

the the same including testing of joints complete as per

direction of engineer in charge.

Concealed work oncluding cutting chases and making

good the walls etc.

20 mm nominal outer dia pipes. Metre 108.00 478.15 51640.20 18.8.2

Providing and fixing brass stop cock of approved quality

15 mm nominal bore Each 8.00 302.55 2420.40 18.16.1

Providing and fixing gun metal gate valve with C.I. wheel

of approved quality (screwed end):

25 mm nominal bore Each 4.00 497.15 1988.60 18.17.1

32 mm nominal bore Each 4.00 581.25 2325.00 18.17.2

40 mm nominal bore Each 4.00 678.40 2713.60 18.17.3

Providing and fixing C.P. bass angle valve for basin mixer

5 and geyser points of approved quality conforming to 18.53

I.S:8931 a) 15 mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe

6 with PTMT Nuts coller and bush of approved quality and 18.74

15mm nominal bore with 45cm length Each 75.00 112.45 8433.75 18.74.2

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 154002.55

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

S. DSR Rate NS Rate DSR -

DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs) Amount

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or

1 hinged grating with or without vent arm complete, including cost of cutting and making

good the walls and floors.

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as per IS 3989. Each 15 1,512.55 22,688.25 17.60.1.1

2 Providing and fixing soil, waste and vent pipes. 17.35

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

100mm dia cast (spun) iron S&S pipe Metre 400 1,092.20 436,880.00 17.35.1.2

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

75mm dia cast (spun) iron S&S pipe Metre 18 992.05 17,856.90 17.35.2.2

Providing and fixing single equal plain junction of reqd. degree with access door, insertion

rubber washer 3mm thick, bolts and nuts complete.

Sand cast (spun) iron pipe IS-3989 Each 27 722.55 19,508.85 17.43.1.2

Sand cast (spun) iron pipe IS-3989 Each 4 549.35 2,197.40 17.43.2.2

4 Providing and fixing single equal plain junction of reqd. degree. 17.44

Sand cast (spun) iron pipe IS-3989 Each 15 667.70 10,015.50 17.44.1.2

Sand cast (spun) iron pipe IS-3989 Each 4 470.40 1,881.60 17.44.2.2

Providing and fixing bend of required degree with access door, insertion rubber washer

3mm thick, bolts and nuts complete.

Sand cast (spun) iron pipe S&S as per IS 3989. Each 4 461.65 1,846.60 17.38.1.2

Sand cast (spun) iron pipe S&S as per IS 3989. Each 4 384.75 1,539.00 17.38.2.2

6 Providing and fixing bend of required degree . 17.39

Sand cast (spun) iron pipe S&S as per IS 3989. Each 25 390.75 9,768.75 17.39.1.2

Sand cast (spun) iron pipe S&S as per IS 3989. Each 4 289.75 1,159.00 17.39.2.2

7 Providing and fixing collar. 17.57

Sand cast (spun) iron pipe S&S IS-3989 Each 9 409.45 3,685.05 17.57.1.2

Sand cast (spun) iron pipe S&S IS-3989 Each 4 256.30 1,025.20 17.57.2.2

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe

embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement :

2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting

holes and making good the walls etc.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone

9 aggregate 40 mm nominal size) alround SW including bed concrete as per standard 19.2

Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps. including cutting

and making good the walls etc.

32 mm nominal bore Metre 40 529.70 21,188.00 18.10.4

40 mm nominal bore Metre 6 639.60 3,837.60 18.10.5

50 mm nominal bore Metre 27 786.75 21,242.25 18.10.6

Painting G.I. Pipes and fittings with two coats of anticorrosive bitumastic paint of approved

32 mm nominal bore Metre 40 17.05 682.00 18.40.4

40 mm nominal bore Metre 8 19.40 155.20 18.40.5

50 mm nominal bore Metre 27 23.35 630.45 18.40.6

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and

12 fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer 17.65

(of approval quality) for new work

100mm dia cast (spun) iron S&S pipe Metre 270 64.20 17,334.00 17.65.1

75mm dia cast (spun) iron S&S pipe Metre 8 48.85 390.80 17.65.2

Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes & fittings

Providing & filling the joints with spun yarn,cement slurry & cement mortar 1:2(1 cement: 2

fine sand) in SCI/CI pipes.

15 Providing and fixing single unequal plain junction of reqd. degree. 17.48

Sand cast (spun) iron pipe IS-3989 Each 4 798.80 3,195.20 17.48.1.2

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 943978.65 0.00

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

DSR - DSR Amount

S. NO. DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) NS Amount (Rs)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of required shade complete as

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all

3 NS accessories as per manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 4 12,649.10 50,596.41

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 4 2,452.51 9,810.03

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683).

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of

4 21 rating 68 degree centigrade with required accessories :

21.1 Pendent Sprinkler NOS. 5 484.00 2,420.00

21.3 Horizontal side wall sprinkler NOS. 5 579.00 2,895.00

Upright Sprinkler

21.4 Concealed sprinkler NOS. 145 1,397.00 202,565.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of

stainless steel complete with 15 NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to

5 25 sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,

center bracket, stockbar of following sizes complete as required.

Providing, jointing and testing of automaticaly operated Halotron fire extinguishers(cap-

5kg,temperature rating-68degc,test pressure-30bar) complete with all accessories/fittings.

TOTAL CARRIED TO SUMMARY 1,127,275.00 165,163.55

PROJECT - Office of Invest India at New Delhi_Electrical Works

ELECTRICAL SUMMARY

S.No Description MR Amount DSRAmount

1) MAIN PANEL 290749.88

2) DISTRIBUTION BOARDS. 0.00 106816.00

5) LIGHTING FIXTURES 1600226.39 0.00

7) WIRING FOR DATA AND VOICE OUTLETS 427251.9092 475650.00

8) CABLE TRAY.& RACE WAY. 840707.71 43045.00

9) UPS AND BATTERY RACK. 1031232.48 0.00

10) RODENT REPELLANT SYSTEM 180727.75 221982.00

10) ACCESS CONTROL SYSTEM & BIOMETRIC 939371.70

GRAND TOTAL IN RS 11021319.46

GRAND TOTAL IN RS 11021319.46

VASTU MANDAL arc hitec ts, interior d esig ners

F-328, Old MB Road . Lad o Sarai. Mehrauli, New Delhi 110030

Telfax 41665455 Email :vastumand al@g mail.c om

PROJECT -Office of Invest India at New Delhi _Electrical works - Estimated cost

S.No DSR No. Description Unit Qty Rate MR Amount DSR Amount

Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire free standing floor

mounted indoor MV panel made out of 14 SWG sheet after seven tank process and painting with

epoxy powder coating MV electrical panel shall be dust and vermin proof ,hinged and locable

doors.The panel shall consist of suitable rating TPN bus bar at the rating of 0.8A /SQMM Supported

by DMC/SMC insulator and color coded with heat shrinkable sleeves. Metering shall be provided

1.1 as specified .The panel shall have short circuiting with standing capacity of minimum 36KA and

consist of the switch gear as mentioned below .The panel shall got fabricated from manufacturer

with CPRI test certificate .The panel shall be mounted on U channel including supply and fixing of

the same.(including Capacitor banks)

− 250 Amps 4P On Load change over switch. -1No.

− 250 Amps 4P 36KA MCCB. -1No.

− Spreaders-1Set.

− Extended Rotary Operating Mechanism.-1Set

Digital V A F Meter with built in Selector Switch, CTs, CT shorting links, R/Y/B LED indicating lamps

− and control SP MCBs.

Outgoing Section

− 63 Amps FP MCB_C curve -4Nos.

− 80 Amps FP MCCB -1No.

− 125Amps 4P25KA MCCB-3Nos.

− 8 Step Automatic Power Factor Correction Relay (Digital)_1 No

− 63 Amps TP MCB -3Nos.

− 32 Amps TP MCB -4No.

− 10 kVAR capacitor duty Contactor with 220 V AC Coil_3 Nos

− 5 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos

− ON / OFF LED Indicating Lamps _7Set

Start / Stop Push Buttons_7Set

− A/M Selector Switch_1 No 0.00

Control S/P MCB (2/4 A)_7 Nos

− Neutral Links_7 Nos

Control Blocks_7 Nos

Enclosure, 300A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal& Non

adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as required._1Set

1.2 Supplying the following MCCBs in sheet steel enclosure. For Ups Input & Output

125A 4P MCCB in sheet steel enclosure surface mounted on the wall along with incoming &

a) outgoing Cable Box, suitable for Termination of Aluminium / Copper Cable. (For Ups Input ) No. 2 13871.60 27743.21

b) UPS Output panel

125 A 4P Onload changeover switch in sheet steel enclosure surface mounted on the wall along

- with incoming & outgoing Cable Box, suitable for Termination of Aluminium / Copper Cable.

- Outgoing Section

- 80 Amps FP MCCB -3No.

- Spreaders-3Set.

- Extended Rotary Operating Mechanism.-3Set

Enclosure, 200A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal& Non

adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as required._1Set SET 1 34076.60 34076.60

Total of Main panel carried over to summary 290749.88

2.0 DISTRIBUTION BOARDS. 0.00

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240

V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

2.1 2.30 interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.3.3 12 way , Double door NOS 1 2053 2053.00

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned

2.2 2.50 copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and

incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable

for inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

ii 2.10.2 Single pole and neutral NOS 6 544 3264.00

iii 2.10.3 Double pole NOS 6 556 3336.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete

2.4 2.14 with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete

2.5 2.15 with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic

release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle

2.6 2.20 panel, making connections, etc. as required.

Total of Distribution Boardcarried over to summary 0.00 106816.00

3.0 CABELS / MAINS

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

grade of following size on wall surface as required.

a 7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Meter 450 39.00 17,550.00

b 7.7.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Meter 50 104.00 5,200.00

Supply of 1100V grade armoured cable having sector / circular shaped aluminium / copper

conductor PVC insulated cores under ground PVC tape wrapped inner sheathed, GI strip / wire

armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on wall or ceiling using

GI clamps and spacers as per route shown at site and further as directed by Engineer-in charge

a MR 185 Sq.mm 3 1/2 core Aluminium cable mtr. 50 850.93 42,546.42

b MR 35 Sq.mm 3 1/2 core Aluminium cable mtr. 50 210.06 10,502.81

c MR 16 Sq.mm 4 core copper cable mtr. 50 702.42 35,120.86

d MR 25Sq.mm 4 core copper cable mtr. 50 1048.80 52,439.80

e MR 4 Sq.mm 3 core Copper cable (For AC Units) mtr. 300 474.97 142,490.36

Supplying and making end termination with brass compression gland and aluminium lugs for

3.3 9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

Total of Cables / Mains carried over to summary 303464.08 39562.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V grade 1.5

sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in & including 25 mm

dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732 including all accessries

such as junction boxes , conduit bends, elbows and ceiling rose , and anodised GI switch box with

modular switch ,modular plate and the box covered with front plate

4.1 1.3.3 One light point controlled by one 6A switch 210 1213 254730.00

Secondary light point controlled by same switch Per

Point wiring for 6Aplug point using 2 runs of 1100 V grade 2.5sqmm & one run of 2.5 sq.mm FRLS

insulated multistranded copper wires, in & including 25 mm dia , MS conduit surface /concealed in

4.3 1.7.2 wall / ceiling conferming to IS 732 including all accessries such as junction boxes , conduit bends, 2000 229 458000.00

elbows and ceiling rose , and anodised GI switch box .

4.4 1.3.3 Exhaust fan point including of ceiling rose near fan. 4 1213 4852.00

Wiring for circuit wiring alongwith earth wire with following sizes of FRLS PVC insulated copper

conductor,single core cable in surface/recessed MS conduit as required. (For lighting controoled

by MCB+Circuit wiring).

- 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire 500 208 104000.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated copper

conductor cable drawn through 25 dia MS conduit laid in surface/concealed over false ceiling or Per

in slab/wall chases including ,2way modular switches,modular plate ,suitable GI box and earthing Pts

the point with 1.5 sqm FRLS PVC insulated copper conductor single core cable as required

Wiring for light/power plug using 2 run of 4sqmm,1100 V grade with one run of 4 sqmm green

colour for earth continuity conductor FRLS PVC insulated wires drawn through MS conduit laid Per

4.7 1.5 concealed over false ceiling or in slab/wall chases including circuit wires from the relevant DB . 900 265 238500.00

Point wiring for UPS or stabilized power plug points on workstations / table for computers using

following sizes of FRLS PVC insulated copper conductor ,single core cable in existing surface

4.8 1.17 /recessed steel conduit/race way and taken upto table in wooden or metal partitions.

24.3+1.2 Supply & fixing of 3nos.16A modular type switch and 1no 16A socket in same box with fixing

7.5+1.28. mounting plate complete as required.

24.3+1.2 Supply & fixing of 2nos.6A modular type switch and 1no 6A socket in same box with fixing mounting

7.5+1.28. plate complete as required.

24.5+1.2 Supply & fixing of 1no.16A modular type switch and 1no 16A socket in same box with fixing

7.2+1.28. mounting plate complete as required.

Total of Wiring carried over to summary 0.00 1812150.00

5 LIGHTING FIXTURES

Supply & fixing of lighting fixtures as per the details given below including necessary hardware such

MR as clamps,nuts, bolts, nails, screws and suspension chains as required for fixing the fixtures in position

as directed by Engineer-in-Charge.

Supply of 2'X2' recessed mounted Luminaire with Maximum 30 Watt with Lumen output of 3300

lumen. The product should be SMD based and have non integral isolated driver with 3KV inbuilt

surge protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour at L70 B50

5.1 parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have teflon coted multi Nos. 20 2091.93 41838.65

strand wires and external wire should have PVC coated multistrand wires.

SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) downlights with

maximum 12 Watt with minimum 1320 lumen.The product should be SMD based & have non

integral isolated driver with 2KV inbuilt surge protection. THD<10%, PF >0.9,Product should have life

5.2 class of 50K burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal Nos. 45 1157.72 52097.29

wiring should have teflon coted multi strand wires and external wire should have PVC coated

multistrand wires.

SITC of Extruded Aluminium surface mounted 36Watt, 4000 lumen LED batten with PC Diffuser and

Spring Steel Clamps for Surface Mounting arrangement. Driver THD<15%, PF >0.9,with 2KV inbuilt

5.3 surge protection. Internal wiring should have teflon coted multi strand wires and external wire Nos. 75 961.04 72078.05

should have PVC coated multistrand wires.

Supply of COB LED down light with die-cast aluminium housing in white powder coating finish,

specially designed heat sink, anti glare diffuser and separate energy efficient electronic driver

(height should not be more than 66mm) downlights with maximum 3 Watt with minimum 315

5.4 lumen.The product should have integral isolated driver with 2.5KV inbuilt surge protection. nos. 60 651.98 39118.62

THD<10%, PF >0.9,Product should have life class of 50K burning hour at L70 B50 parameter,

Luminiare operating temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires

and external wire should have PVC coated multistrand wires. LM79 & 80 reports to be part of

Supply of submission

Continious recessed mounted Luminaire with Maximum 36 Watt with minimum 5040

Lumen. The product Housing should be Aluminium Extrusion with PMMA Sliding Diffuser and have

Constant Current, non integral, isolated driver with 3KV inbuilt surge protection. THD<10%, PF

>0.9,Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare operating

temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and external wire

should have PVC coated multistrand wires. LM79 & 80 reports to be part of technical submission.

LxWxH- upto 2395x146x48MM

Supply of Techzone Continious recessed mounted Luminaire with Maximum 18 Watt with minimum

2520 Lumen. The product Housing should be Aluminium Extrusion with PMMA Sliding Diffuser and

have Constant Current, non integral, isolated driver with 3KV inbuilt surge protection. THD<10%, PF

>0.9,Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare operating nos. 10 4256.78 42567.82

temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and external wire

should have PVC coated multistrand wires. LM79 & 80 reports to be part of technical submission.

LxWxH- upto 1195x146x48MM

Supply of Suspended Continious Linear Luminaire with Maximum 36 Watt with minimum 3960

Lumen. The product Housing should be Aluminium Extrusion with PMMA Sliding Diffuser and have

Constant Current, non integral, isolated driver with 3KV inbuilt surge protection. THD<10%, PF

>0.9,Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare operating

temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and external wire

should have PVC coated multistrand wires. LM79 & 80 reports to be part of technical submission.

LxWxH- upto 2385x52x75MM

Supply of Suspended Continious Linear Luminaire with Maximum 18 Watt with minimum 1980

Lumen. The product Housing should be Aluminium Extrusion with PMMA Sliding Diffuser and have

Constant Current, non integral, isolated driver with 3KV inbuilt surge protection. THD<10%, PF

>0.9,Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare operating

temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and external wire

should have PVC coated multistrand wires. LM79 & 80 reports to be part of technical submission.

LxWxH- upto 1200x52x75MM

Recessed / Suspended strech fabric Luminaire ( Light Emiting Diode) System power 20 W led, color

temperature as per selection, 230 V Constant current driver, 70% of luminous flux after 50,000

5.6 operating hours, energy efficeient LED's cri > 80, luminous flux of 10,800 LM , electronic control gear sqm 11.5 20878.72 240105.26

, direct light emmision, 1.2mm thick alluminium extruded frame, polyster white powder coat

applied over a five stage Pre - treatment, Opal diffuser, for glare free uniform light protection class ,

Supply of Recessed mouted PDC lowdepth(height should not be more than 35mm) downlights with

maximum 18 Watt with minimum 1980 lumen.The product should be SMD based & have non

integral isolated driver with 2KV inbuilt surge protection. THD<10%, PF >0.9,Product should have life

class of 50K burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal

wiring should have teflon coted multi strand wires and external wire should have PVC coated

multistrand wires..Panasonic Cat Ref. PDLM26188

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600 lumen.

The product should be SMD based and have non integral isolated driver with 2KV inbuilt surge

protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour at L70 B50

parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have teflon coted multi

strand wires and external wire should have PVC coated multistrand wires.

Total of Light Fixture carried over to summary 1600226.39

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including all accessories, and providing

6.1 5.2 masonry chamber with cover plate having locking arrangement and watering pipe etc. with Nos. 4 5308.00 21232.00

charcoal / coke and salt as required.and testing on completion.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing

surface/ recessed conduit/ submain wiring/ cable as required.

6.3 5.14 25mm x 5mm thick Cu. strip Mtrs 50 1009.00 50450.00

Total of earthing carried over to summary 0.00 101282.00

7 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-III)

complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on surface

including cutting chases in the walls/floors and making good the same complete as required.

Providing and fixing USB socket charging point (USB type A and C) including face plate, GI box,

7.5 including connection complete in all respect as required. (minimum 2V DC output) nos. 120 1395.90 167507.65

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC

7.6 1.53 conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in GI box & cover plate in

wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Nos. 150 119.00 17850.00

7.9 Supply and fixing of the following types Face Plates complete with all accessories.

a Supply & fixing of Single Face Plate Nos. 50 94.34 4716.96

b. Supply & fixing of dual Face Plate Nos. 150 94.34 14150.87

Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 4 Feet :

CAT6 UTP 23 AWG Patch Cord - 1 mtr - Rack End. Factory crimped LCS2 Patch cord in Blue colour.

Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 7 Feet :

7.11 CAT6 UTP 23 AWG Patch Cord - 2 mtr - User End.Factory crimped LCS2 Patch cord in Blue colour. EACH 175 209.50 36661.74

Supplying, installing, testing and commissioning of 24 port Cat 6 patch panels available with block

of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel, loaded CAT6 U/UTP

7.12 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less connector U/UTP unit in EACH 9 4274.17 38467.54

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm) (WXD)

following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D' Grade

thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass Door,Injected one

piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable

Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc &

7.13 MCB 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2 Nos,Heavy Duty Stationary shelf M6 EACH 2 44731.00 89462.00

screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips 150mm H - 1 No, Door Lock - 1 No,

Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without Brake) - 2 Nos, Front Metal Band - 1 No.

Packing: 5 ply cardboard & Inside 28 ply EP foam. In the rack there must be maintained 1 U = 1.75

inches space. Nos. 1 etc complete as required

Total of Data & Voice carried over to summary 427251.91 475650.00

8 CABLE TRAY.& RACE WAY.

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated out of

10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with providing of

Anchor fastners and all necessary hardwares as required for fixing, including cutting, bending,

8.1 welding, drilling, bolting etc. as per design as required and painted with one coat of primer and

two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of following sizes

complete with bend/tee joints, coupling plate & nuts bolts etc. as required for fixing and including

the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth strips complete as per

specifications, as required and as below.

8.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3 mm thick

GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth wire complete

as required including floor supports, bends, access boxes, tap off boxes and cross over as per

specification and site requirement. (overhead / wall mounted recovery & function boxes shall be

a) 300 mm wide x 38 mm deep raceway RM 100 2534.62 253461.59

b) 225 mm wide x 38 mm deep raceway RM 100 2138.85 213885.39

c) 150 mm wide x 38 mm deep raceway RM 50 1562.95 78147.60

d) 100 mm wide x 38 mm deep raceway RM 25 1228.60 30715.03

Providing and fixing 400 x 400 x 50 mm deep 2 mm thick GI sheet junction box including providing 3

mm thick stainless steel cover as per specification.

Providing and fixing 300 x 300 x 50 mm deep 2 mm thick GI sheet junction box including providing 3

mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 50 mm deep 1.6 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Total of Raceway carried over to summary 840707.71 43045.00

9 UPS AND BATTERY RACK.

– 50 kVA UPS with 15 minute backup

Supply, unloading, shifting, installation, testing & commissioning of micro processor controlled 50

kVA transformerless UPS , IGBT based rectifier to achieve input THDI < 5% and input power factor of

9.1 greater than 0.99 at 100% loading. True Online Double Conversion (VFI as per IEC 62040-3) UPS Nos. 1 1,031,232 1031232.48

using PWM IGBT technology , 3 Phase input and 3 phase 415 V output UPS system; and comprising

of the following complete as required and as per specification:

- Fully rated Rectifier cum charger unit and 100% rated Invertor unit Integrated in UPS module.

Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the static

- bypass line integrated in UPS module.

Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments

with below features.

Giving notifications like e-mail, paging notification, broadcast notification, battery replacement

notification, run event-based scripts.

- Event logging, data logging and action logging (with date, time, description of fault and event).

Fully rated Inbuilt Maintenance Bypass Switch for the continuos operation of the load during

- maintanance.

- Local notification through audible alarm.

Fully rated Battery Circuit Breaker with under voltage coil & deep discharge protection to the

Battery Banks comprising of Valve Regulated Lead Acid Sealed Maintenance Free batteries of

minimum 5years design life to provide 15 minutes backup at 50kVA ,0.9PF and ECV=1.7V with each

UPS. The batteries shall be installed on shelves of rack for quick replacement and servicing. The

temperature sensor shall be provided in the battery section for temperature compensated

charging. The bank of batteries shall comprise of required numbers of batteries connected in series.

Vendor to provide complete details of make of Batteries, ampere hour ratings, no. of Batteries,

Expected life, Final discharge voltage, Nominal float voltage, Battery recharge time &

configuration of back up time, Battery sizing Calculations

Supply, unloading, installation, testing & commissioning of open type MS racks including top fully

cover to protect from falling object to house SMF batteries for 60 kVA UPS system along with

suitable interconnecting links, moulded case circuit breaker having Ithermal, Imagnetic &

automatic U/V trip mechanics for Battery Banks etc. complete as required & as per specifications.

Supply, laying, testing & commissioning of flexible single core copper cable for interconnections

between UPS to UPS, UPS to batteries, complete as required for 50 kVA UPS.

Total carried over to Summary 1031232.48

10 RODENT REPELLANT SYSTEM

a) Supply, installation, testing & commissioning of system as per following

Master control unit

Satellites or Transducers

Brackets & Stands

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed RM

f) 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as 1500 141 211500

TOTAL OF RODENT REPELLANT SYSTEM CARRIED OVER TO SUMMARY 180,728 221,982

PROJECT - Office of Invest India at New Delhi - ESTIMATED COST FOR ACCESS CONTROL SYSTEM.

11 ACCESS CONTROL SYSTEM & BIOMETRIC

Supply, installing, testing and commissioning of IP based,web enabled, 2 Door

Reader Controller expandable upto 4 doors which supports all major reader

technologies and biometrics on the same network. The Door controller shall allow

four doors per system over RS485/RS232 or Ethernet/LAN connection.Controller

shall have Users memory 100000 & offline event 30000. The same shall include

1 power supply, housing, in-built battery backup as per technical specification with Nos. 3 104087.01 312261.04

all mounting accessories, power supply & hosuing complete as required. The

master door controller shall be able to create/edit user profiles using web browser

& download in/out data in usable formats such as .csv, .xls etc.

Supply, installing, testing and commissioning of CE Approved smart card

reader with RFID Proximity reader sensor, 13.56 MHz shall be Wiegand and RS-

2 485 Compatible & reading range upto 60 mm. Reader shall be clone card Nos. 6 15589.81 93538.85

detection & destroy feature enabled

Supply, installing, testing and commissioning of CE Approved Printable smart

cards with ISO dimension

3 specification & utilizes 13.56 Mhz DESFire technology & triple-DES data encryption Nos 50 285.11 14255.27

Supply, installing, testing and commissioning of Single Leaf Electromagnetic lock,

4 1200 lbs along with magnetic contact, UL certified as per technical specifications Nos 1 3336.34 3336.34

Supply, installing, testing and commissioning of Dual Leaf Electromagnetic

5 lock, 600 lbs along with magnetic contact, UL certified as per technical Nos 2 2365.77 4731.54

Supply, installing, testing and commissioning of Exit Push Button

Supply, installing, testing and commissioning of Emergency Break Glass with

7 required accessories as per technical specifications Nos 6 2244.45 13466.68

Supply, installation, testing and commissioning of Access Control Application

Software for 64 Reader Capacity, and 4000 Card Holder Capacity, Basic GUI

8 , TA Module with Alarm Module, T+ Module, 1-Nos Client Work Nos 1 154078.26 154078.26

Stations,Module for using SQL DB , -MULTI Site Module.

Face / Card / PIN capacity 5,000

Storage capacity 200,000

Recognition way Face, Card, Password

Language English

Self-checking function Yes

Face FAR/ FRR 0.001/0.1(%)

Recognition Speed 0.3s

Face intelligent update function Yes

Recognition ways 1:1, 1:N

CPU Quad-core, 1.7G

Camera Dual camera (High resolution infrared and color dual cameras)

LCD 5inch HD Touch Screen

Infrared approach receiver Yes

Touch screen Yes

Communication TCP/IP, USB, U-disk, WIFI

Working voltage DC12V - 24V Wide voltage design

Ambient light 0-50000Lux

oo Working temperature 0 C-40 C

Working humidity(RH) 20% ~ 80%

Door sensor(EN-MG) Gate magnetic signal input

Alarm Alarm output

Exit Door switch signal input

Total of Access Control System carried over to summary 939371.70

ESTIMATED COST FOR FA & PA SYSTEM _Office of Invest India at New Delhi

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR.No. Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR.No. Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing and commissioning of micro processor based intelligent addressable

main fire alarm panel, central processing unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and

loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history log in the non volatile memory

1 17.2.1 (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free

batteries with automatic charger. The panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall

be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per

specifications.

Two Loop Panel.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

2 17.2.4 detector complete with mounting base complete as required. Pcs 80 2846.00 227680.00

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate

of rise cum fixed tempreature thermistor complete with base as required.

4 17.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as Pcs 6 3859.00 23154.00

5 17.2.15 required. installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, Pcs 4 3494.00 13976.00

6 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. Pcs 4 3257.00 13028.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box

having two LED, metallic cover complete with all connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper

conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supply, laying, testing and commissioning of 4.0 core x 1.5 Sq. mm Multistrand copper FRLS Armoured

2 MR cable fixed on the surface of the building structure complete with clamping arrangement and all RM 250 128.84 32209.07

Cable end termination of the following PVC sheathed copper conductor armoured cables of 1100

3 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with

2.0 Core x 1.5 Sqmm Cu Ar Cable

4.0 Core x 1.5 Sqmm Cu Ar Cable

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player

1 17.3.1 (including 6 zone button paging station) with seamless integration facility with main fire alarm panel Pcs 1 126399.00 126399.00

for voice evacuation complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating

at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in

ABS enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

1 17.5.3 surface / recessed steel conduit of following pairs, cores and size including connections and

interconnections etc. as required..

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 450 51.00 22950.00

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess including

2 1.20 painting in case of surface conduit,or cutting the wall and making good the same in case of

recessed conduit as required

Sr. No DSR.No. Description Unit Qty Rate Total Amount Total amount

Sr. No DSR.No. Description Unit Qty Rate Total Amount Total amount

7 IP BASED CCTV SYSTEM

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

including painting in case of surface conduit,or cutting the wall and making good the same in

case of recessed conduit as required

Supply, Installation, Testing & Commissioning of 4MP IR IP H.265 Vandal Proof Dome camera with 2.8

to 12mm Motorized Lens,Smart IR, up to 30M IR distance,Up to 80 dB WDR (Wide Dynamic

Range),3D DNR (Digital Noise Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple

streams,3-Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video

Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Intrusion, Crossing line, Motion

7.2 detection, Object left, Missing object,Intelligent Identification Face detection, Defocus, Scene Nos. 45 Rs. 21,474 Rs. 966,325

Change,PoE (IEEE802.3 af) Power consumption: Max 7.2W,Edge Storage Micro SD Card, Up to

256GB, ANR Support,Working Environment -40°C ~ +60°C,

Supply, installation testing and commissioning of Network Video recorder Linux based to manage

and control all the cameras from control room. Software shall support maximum 32 channel with

7.4 joystick controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 4 SATA Interfaces, alarm I/O: Nos. 1 Rs. 121,803 Rs. 121,803

16/4, 1.5U case,19" with 4x6TB i.e. 24TB HDD inside

Supply, installation testing and commissioning of Network Video recorder 16-Ch, 8 SATA interface,

2U, H.265 & 4K, Dual Network interface, RAID 0,1,5,6,10,16 X 1080P, 8X 4MP, 4X 4K, 320 MBPS.with

4x6TB i.e. 24TB HDD inside

Supply, installation, testing and commissioning of Video Management software enabling security

related personnel to easily and remotely gather video evidence, monitor live situations, and

configure and maintain a video surveillance system over Ethernet consisting of digital video

recorders (DVRs), hybrid digital video recorders, network video recorders (NVRs), analogue video

cameras, and IP video cameras should support Detachable Viewers –users have the ability to

detach Viewer panels and move them to other (or the same) monitor(s). A maximum of two (2)

Viewers can be detached for a total of 75-up video tiles [two (2) detached and one (1) core

Supply Installation Testing & Commissioning of 21 inch Full HD LED monitor including wall mount

7.7 brackets/ clamps/ desk mounting stand. Nos. 2 Rs. 6,072 Rs. 12,143

7.8 Supply and fixing of RJ45 Connector Nos. 45 Rs. 354 Rs. 15,915

Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45 face plate

7.9 complete as required. Nos. 45 Rs. 88 Rs. 3,943

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6, Termination of

Catergory-6 UTP Cable, UL listed, Shall conform to Category-6 as per the EIA/TIA-568C.2, Shall

support network line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and

strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius

7.10 of the cable, Shall have minimum durability of 750 mating cycles and 200 termination cycles. Shall Nos. 45 Rs. 240 Rs. 10,820

be certified by independent labs like ETL/GHMT for compliance to EIA/TIA-568C.2. The outlet shall

be fixed in existing box & cover plate in wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring shuttered

7.11 front access for preventing ingress of dust, dimension as per commercially available modular office Nos. 45 Rs. 78 Rs. 3,523

Supply, installation, testing and commissioning of Rack 12U with all accessories viz 4 Nos of

7.12 mounting hardware, fan tray, power strip and cable manager as required as per site. Nos. 1 Rs. 4,008 Rs. 4,008

Supply & Laying in existing conduits/raceway/furniture of 4-pair Unshielded twisted pair cable with

a cross filler (+), meeting Category 6 standards as per TIA-568C.2. The cable shall be tested till 600

7.13 MHz or more from independent laboratories like ETL for 4 connections. Test Certificate from RM 1350 Rs. 30 Rs. 40,441

independent labs like ETL shall be required.

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB based IO Jacks

(RJ45, TIA-568C Category-6), having integrated bonding bar or other mechanism for grounding,

loaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2. Shall

7.14 be 6 port module construction for better cable dressing at the rear. The jacks shall have RJ-45 type Nos 2 Rs. 2,147 Rs. 4,295

connector with bend limiting and strain relief boot for securing IDC contacts from external forces

and for maintaining the bend radius of the cable.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord

cable shall be offered in multiple coloured UTP cable for design flexibility with a clear strain relief

boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring

schemes. UTP Cable, 2 Meter.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord

cable shall be offered in multiple coloured UTP cable for design flexibility with a clear strain relief

boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring

schemes. UTP Cable, 1 Meter.

Supply Installation Testing & Commissioning of Managed Layer -2 Switch with Power on Ethernet

7.17 (PoE) enabled, 24 Port Fast Ethernet Web Smart Switch, including 2 Gigabit BASE-T and 2 Gigabit Nos 4 Rs. 12,169 Rs. 48,674

Combo BASE-T/SFP.

TOTAL OF IP BASED CCTV SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 1,308,932 Rs. 148,500

PROJECT - Office of Invest India at New Delhi_Audio - Video Works

SUMMARY OF COST

S.No Description MR Amount DSRAmount

1 BOARD ROOM 5,510,061.95 -

2 LANGUAGE TRANSLATOR 2036175.879 -

3 MEETING ROOM 1492611.70 -

4 EPBAX & DISPLAYS 5168438.37 -

BOQ of Board Room

S.No Item SITC of the Folowing Items / Works UoM QTY Rate Amount

A Display System

SITC of 98" Full HD LED Display,Audio Built in Speaker(10W + 10W), INPUT Type DVI-D,HDMI 2.0 X 2, USB 2.0 x 1 ,

Audio Input X 1, OUTPUT Type Stereo Mini Jack, HDMI X 1, Duty Cycle 24 x 7, Speacial features, File support

Direct vieweing of PPT, Word ,PDF, Images and video from pen drive, EXTERNAL CONTROL RS232C(in) thru

stereo jack, RJ45,

SITC of 65" Full HD LED display, HDMI X 2, VGA X 1, Video IN X 1, USB X 1, Audio IN X1, Audio Out X 1, SPDIF X 1,

RS232C x 1, 20W in built speaker, IPS LED display, USB media player

3 Wall mount BracletWall Mount bracket for suspension of LED Display Each 3.00 9,218.73 27656.19

4 Cable Manager SITC of Table Top Cable Manager { With 2xData,1X Voice, 1x6A Power Socket, 1x6A Power Switch. Each 10.00 13,226.87 132268.74

Supply, Installation, Tetsing & Commissoning of proffesstional camera, optical zoom : 12X, Horizontal Viewing

5 M.R. Angl : 72.5°(W)~6.9°(T), Signal System : NTSC/PAL, Presets : 9 preset positions by IR remote control, 255 preset Each 2 124252.46 248504.91

positions by keyboard or third party controller etc complete required as per specifications.

Supply, Installation, testing and commissioning of Video Conferenece system (Hardware / Software based)

enabled for smart meetings,presentations:Supports dual screens for video and content,wireless content

sharing must be built for cloud & premises support Bandwidth-Up to 6 Mbps point-to-point with multisite

feature: Adaptive SIP/H.323 MultiSite upto 5 participants(3-way resolution up to 1080p30 + content up to

4Kp5) using video standards H.264, H.265 Simplified join-meeting experience with One Button to Push feature.

Similar to CISCO VC Room Kit Pro Precision 60: Codec Pro

Supply, Installation, Testing & Commissoning of professtional camera must required objects close up feature,

or wide pan/tilt/zoom capability, Optical zoom : 10X Optical Zoom, Horizontal FoV: 80 degrees, Signal System

: NTSC/PAL, Video interfaces:HDMI 1.4/3G-SDI with Camera control: Ethernet, Adjustment:Focus, white

balance, and brightness: Automatic or manual etc complete required as per specifications. Similar to VC

Camera Cisco TelePresence Precision 60 Camera with Codec Pro

Supply, installation, testing and commissioning of cardioid polar pattern with 120º acceptance angle Mounts

8 M.R. unobtrusively in table-tops Boundary Layer Microphone with on/off switc,Output connector:Integral 3-pin Each 13 20727.83 269461.78

XLRM-type using PHANTOM POWER SIGNAL TO NOISE RATIO is 65 dB, 1 kHz at 1 Pa

Supply, Installation, Tetsing & Commissoning of Table Top Digital Chairman Unit with Supercardiod / Array

technology Microphone and built in DSP limiter or better, Dual / Twin Loudspeaker for better sound

reinforcement, Microphone on/off button with lighting indication, Priority switch for temporary muting

delegates, RJ-45/CAT5/CAT6 daisy chain connectivity etc complete required as per specifications..

Display Panel Size 21.5 with full HD, Patented cordless, battery free pen, Integrated USB hub with 2 USB ports,

10 M.R. Touch Point: 5 points touch, HDMI: x1, Audio: x1 PC, SD/SDHC, RJ45: x1, USB 2.0 x3, WEBCAM, OS Android, Each 1 205560.51 205560.51

digital whiteboarding software, Cast streaming software.

11 M.R. Supply & fixing of Molded CAT-5/6 Patch Cords for loop in loop out 3 mtr length. Each 12 2273.19 27278.28

12 M.R. Supply & fixing of Molded CAT-5/6 Patch Cords for loop in loop out 20 mtr length. Each 2 6756.59 13513.17

Supply, Installation, testing and commissioning of wireless digital hanhdeld Microphone with 18 or more

channel, RF output 100mW or more, super cardioid pickup pattern, Frequency range : 1880 to 1930 MHz,

Connectivity : RJ-45, Battery backup : 13 or more hr with required charger (from the same make) etc

complete required as per specifications.

Supply, Installation, testing and commissioning of wireless digital collar Microphone with 18 or more channel,

RF output 100mW or more, super cardioid pickup pattern, Frequency range : 1880 to 1930 MHz, Connectivity

: RJ-45, Battery backup : 13 or more hr with required charger (from the same make) etc complete required as

per specifications.

Supply, Installation, testing and commissioning of ceiling mount speaker with coaxial type, Line Transformer

15 M.R. Tappings : 24watt-12watt, low impedance owe : 30att or more, Frequency range : 45 Hz - 20 kHz, frequency Each 6 6527.55 39165.29

response : 55 Hz - 20 kHz, driver : 6.5", MAx SPL : 103dBetc complete required as per specifications.

Supply, Installation, testing and commissioning of power amplifier with built In crossover, Energy star rated,

Technology : Class-D, 4 x 250 W @ 4 Ω Stereo, 4 x 130 W @ 8 Ω Stereo, Crosstalk (@ 1 kHz) : > 70 dB, S/N ration :

> 90 dB, Switching mode power supply, Protection : DC Short circuit; Over heating; over load; Signal limiting

etc complete required as per specifications.

Supply, Installation, testing and commissioning of digital signal processor with 8no. Mic / line input with AEC,

8no. Output, Dante connectivity, USB connectivity etc complete required as per specifications.

Supply, Installation, Tetsing & Commissoning of wireless presentation system, 1 VGA input, 3 HDMI inputs 4K60

18 M.R. 4:4:4, 4K scaled HDMI® output (4K60 4:4:4), 1 RS-232, 2 relay ports, 2 I/O ports, Line in/out, LAN with PoE, Each 2 71917.55 143835.10

802.11b/g/n, Includes (2) TS-K1 and (1) TS-KH4 etc complete required as per specifications.

Supply, Installation, Tetsing & Commissoning of HDMI® 2.0a cable (2m (6.6ft), black) etc complete required

as per specifications.

20 M.R. Supply, installation, testing and commissioning of cable cubby with HDMI, VGA + Audio, Power connectivity. Each 5 42715.36 213576.80

21 i-Pad Apple i-pad with 32GB, 10.2" Screen Each 1 33782.93 33782.93

Client workstation Processor intel Zeon 4ghz or higher, OS geniune Window 10/7", RAM 8GB DDR3 SDRAM,

MEMORY 1TB HDD, 2GB GRAPHIC CARD complete as required

23 M.R. Supply , Installtion , Testing and Comissioning of CAT6 information outlet (I/O) for Data, Voice & Wi-Fi Field end. Each 6 297.75 1786.49

24 M.R. Supply , Installtion , Testing and Comissioning of loaded 24 port CAT 6 jack panel for CAT6 cable termination Each 1 6,756.59 6756.59

Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 4 Feet : CAT6 UTP 23

AWG Patch Cord - 1 mtr - Rack End. Factory crimped LCS2 Patch cord in Blue colour.

Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 7 Feet : CAT6 UTP 23

AWG Patch Cord - 2 mtr - User End.Factory crimped LCS2 Patch cord in Blue colour.

Supply , Installtion , Testing and comissioning of 27U Floor mount rack with fans , 2 cable managers ,

satationary shelf , 2 Nos of hardware pkts.

Supply, Installation, Testing & Commissioning of 24 Port POE Access Switches with switching capaticy of

28 M.R. 128 Gbps, forwarding performance 95 Mpps, having 24 x 10/100/1000BASE-T PoE- plus(RJ45) with minimum Each 1 143,147.99 143147.99

PoE budget of 190W and 4x 10G SFP+ uplink ports.

Supply , Installation , Testing and Comissioning of 3X3 MIMO AP Ac/a/b/g/n technology with 2 Spatial

streams Support, Should be able to act as controller in case of main controller failure and the failover should

29 M.R. eb automatic with no manual intervention . Should have complete distributed architecture with Controller Each 4 33,072.91 132291.65

for traffic management. Stateful Firewall, IPSEC, RADIUS server support, NAT support and integrated PoE

support, IDS support in hardware.

Supply , Installation , Testing and comissioning of wireless LAN Controller with high available

architecture support with min 100 AP scalability. Min 4x 100/1000 Base T Port .Mi 15500 Wireless Client support.

Min 4GB RAM, Should act as RADIUS server, VPN server, DHCP server. Has support for firewall functionality

.IPSec VPN gateway, BYOD.

Total Amount 5,510,061.95

Total Amount 5,510,061.95

Language Interpreting words

S.No Item SITC of the Folowing Items / Works UoM Unit Cost (INR) Qty. Amount

B Language interpreting words

SITC of interpretation Device: Frequency range AW+, GW, BW, CW, DW wideband FM analog 470,100 –

558 MHz, 558 – 626 MHz, 626 – 698 MHz, 790 – 865 MHz, Receiving channels: max. 32, Signal-to-noise ratio

(1 mVHF Peak deviation) ca. 90 dBAeff

AF frequency response 40 – 15,000 Hz Output power 2.4 V, 5% THD and nominal deviation 100 mW/ 32 Ω

Headphone output 3.5 mm jack socket for headphones with at least 8 Ω Power supply 2 AA size batteries 1.5 V

Operating time approx. 8 h, Dimensions approx. 81 x 65 x 23 mm

1 Tourguide receiver Weight approx. 180g-210g NOS 47,936.37 10 479363.7

Temperature range

SITC of Headphone: Powerful sound reproduction, crisp bass response, Lightweight and comfortable to wear,

Good attenuation of ambient noise, High-quality leatherette ear pads, requency response (Headphones) 21 -

2 18000 Hz, (SPL)108 dB (SPL), THD, total harmonic distortion <0,7 %, Ear coupling: circumaural, Jack plug: NOS 5,994.63 10 59946.3

3,5/6,3 mm stereo

Cable length: 3 m, Nominal impedance:24 Ω

SITE of DSP with Specification : THD+N (22Hz to 22kHz) 0.002% (1kHz @ +4dBu)*, EIN <125dBu,

unweighted (20Hz to 20kHz)

Dynamic Range 110dB, Propagation Delay 4ms at 48kHz, 2ms at 96kHz, Crosstalk input to input, 1kHz

Digital Signal Sampling Rate min 48kHz, Card Slots 16 user-configurable, Phantom Power +48VDC, with XC-SML

Processor USB (with XC-SUB) Bit depth: 16-bit, Number of channels: 2x2, send and receive, Driver sample rate: 48kHz

Display(s) Front panel, OLED, Power Supply 90-240 VAC (50-60Hz) via internal power supply with IEC

Ambient Operating Temperature 32-104°F (0–40°C), AES67 Compatibility Yes, with XC-CTODN

Input Card(analog to SITC of Coverters with Spec: 2ch Mic/Line input card with selectable mic, line, mic gain, and phantom power

digital converters) per input. 32-bit analog to digital converters as per requied.

Input Card(digital to

5 SITC of Coverters with Spec: 2ch Line output card. 32-bit digital to analog converters as per requied. NOS 6,890.38 2 13780.76

analog converters)

SITC of Stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the

whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems,Easy and

flexible wireless synchronization between transmitter and receiver via infrared Compatible with control software

for flexible frequency allocation,Up to 16 compatible channels, Up to 42 MHz bandwidth with 1680 selectable

6 Stereo Transmitter frequencies, fully tunable in a stable UHF range, Transmission Range: up to 100 meters / 300 feet, High RF NOS 87,921.24 1 87921.24

output power (up to 50 mW) depending on country regulations, Audio input: 2x XLR-3/¼" (6.3 mm) jack

combo socket, Signal-to-noise ratio: >90 dB, RF output power, switchable: Low: typ. 10 mW, Standard: typ. 30

mW, High: typ. 50 mW, Transmission frequency: Max. 1680 frequencies, no intermodulation 6 frequency banks

with up to 16 programmable channels

SITC of Mic with Spec: Frequency Range minimum 470-516Mhz, Engineered for professional live sound:

Rugged all-in-one wireless system for singers and presenters.

True diversity half-rack receiver in a full-metal housing with intuitive LCD display for full control, transmitter

7 Handheld Microphone with integrated mute switch, Easy and flexible wireless synchronization between transmitter and receiver via NOS 49,610.73 2 99221.46

infrared, Fast frequency allocation for up to 12 receivers via new linking functionality Up to 20 compatible

channels, Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range

Transmission Range: up to 100 meters / 300 feet

SITC of Bodypack Headmic : Integrated network port allows control, monitoring and setup via Control

BODYPACK Software, Up to 88 MHz bandwidth, up to 32 channels, Increased RF output power (10/30/50 mW),

HEADMIC SET Transmission Range: up to 100 meters / 330 feet, Compatible with wireless speaker system, remote control

switch available for the bodypack transmitter

SITC of Rack-mountable ten-bay charger compatible with the receivers as per specification bodypack

receivers/transmitters.

The rugged, easy-to-use charger features ten charging bays with charging status LED’s. Its plug-in slots can

9 Receiver Charger charge upto ten receivers simultaneously. A special catch holds the receivers securely in place and ensures that NOS 149,934.65 5 749673.2

they remain in contact with the charger even in mobile use. The charger comes equipped with holders and

installation brackets for easy installation in a 19‘‘ rack. Status LEDs

clearly indicate whether the receivers have reached a full charge.

Ground Total 2036176

S.No Item SITC of the Folowing Items / Works UoM Qty. Unit Cost (INR) Amount

B Meeting Room

Software compatibility

● Collaboration Endpoint Software Version 9.0 or later, or OS Default components in Room Kit Plus Quad Camera ● Touch

10 control unit ● Wall mount for Quad Camera

● Table Microphone, Wall mount for Codec Plus, cables

● Up to 6 Mbps point-to-point

● 720p30 from 768 kbps

● 720p60 from 1152 kbps ● 1080p30 from 1472 kbps ● 1080p60 from 2560 kbps

Video standards

● H.264, H.265, and H.263 for TANDBERGTM MXP interoperability only

● One HDMI input supports formats up to maximum 1080p60

● Two HDMI inputs support formats up to maximum 4K (3840 x 2160) at 30 fps including HD1080p60 ● Extended Display

Identification Data (EDID)

● Consumer Electronics Control (CEC) 2.0

1 M.R. ● 1 line out mini-jack (stereo) (Codec Plus) Each 1.00 1064994 1064993.84

● 1 RCA output for subwoofer (Quad Camera)

● Embedded audio on one HDMI output

● HDMI input #1 supports Audio Return Channel (ARC): Audio output to Quad Camera Speakers (Quad Camera)

● High-quality speakers

● Frequency response: 70 Hz to 20 kHz ● Max output level SPL 90dB

● H.239 (H.323) dual stream

● Binary Floor Control Protocol (BFCP) (SIP) dual stream

● Support resolutions up to 3840 x 2160p5 (4Kp5),1080p30 and 720p60

● Adaptive SIP/H.323 Multi Site

◦ 3-way resolution up to 1080p30 + content up to 4Kp5 ◦ 4-way resolution up to 720p30 + content up to 4Kp5

•● Full individual audio and video transcoding

•● H.323/SIP/VoIP in the same conference

•● Support for presentation (H.239/BFCP) from any participant at resolutions up to 3840 x 2160p5

SITC of 65" Full HD LED display, HDMI X 2, VGA X 1, Video IN X 1, USB X 1, Audio IN X1, Audio Out X 1, SPDIF X 1, RS232C x

1, 20W in built speaker, IPS LED display, USB media player

Supply, Installation, Tetsing & Commissoning of HDMI® 2.0a cable (2m (6.6ft), black) etc complete required

as per specifications.

Supply, installation, testing and commissioning of cable cubby with HDMI, VGA + Audio, Power connectivity. Each 2 31610 63220.34

S.No Item SITC of the Folowing Items / Works UoM QTY Rate Amount

Heavy Duty Laser Colour Laser Multifunctional Printer :- Printing method: Colour Laser Beam Printing, Print

speed (BW/CL): 20 ppm (A4), 15 ppm (A3), Print resolution: 600dpi×600dpi, 1200dpi×1200dpi, Direct

printing available from USB memory key. Supported file types: TIFF, JPEG, PDF and XPS., Copy speed

(BW/CL): 20 ppm (A4), 15 ppm (A3), Scan Type: Colour Platen and Duplexing Automatic Document

Feede, Support media size/s: DADF-AV1: A3, B4, A4R, A4, B5R, B5, A5R, A5, B6, Power consumption :

1 M.R. maximum: Approx. 1.5 kW. Standby: Approx. 33.6 Wh *Reference Value. Sleep mode: Approx. 2 W Each 7 211,859.03 1483013.19

(Wireless LAN power save mode: OFF), 1 W (Wireless LAN power save mode: ON)

Supply, Installation, Testing & Commissioning of Of EPABX along with operarator phone Rack Mounted

Digital Phone ready PBX system Equipped with Power Supply . 30 Channel ISDN PRI Line Card ( 2 )

08 Analog CO Lines 24 Digital extensions

120 Analog extensions with CLI

2 Port Auto Attendant, Welcome Greetings - DISA Communication Assistant Pop Up Software with

2 M.R. Outlook Interface Customised Music on Hold 2 Hours Advanced Voice Mail with Voice to email facility Set. 1 317789 317788.54

LAN Port for Maintenance and IP Applications

You may add additional Cabinet and Expan upto 400 Extensions

Supply, Installation, Testing & Commissioning of CLI Analog Phone with speaker facility as per tender

specification.Analog Phone with Display,CLI and Sp-phones

Supply, Installation, Testing and Commissioning of 50 Pair MDF for Field side For Floors. Approved

4 M.R. Makes: Belden/Siemon/Panduit/DerWiser/Krone Nos. 3 5153 15459.98

Supply , Installtion , Testing and comissioning of 15 U (500W/500D) Wall mount rack with 2 fans, 4

5 M.R. cable managers, 1 stationary shelf, 5 Nos of hardware pkts., 6 Socket PDU with MCB. Nos. 2 10748 21495.10

Supply , Installtion , Testing and comissioning of Digital Phone with display, and sp-Phone

7 MR SITC of 55" Full HD LED display, HDMI X 2, VGA X 1, Video IN X 1, USB X 1, Audio IN X1, Audio Out X 1, SPDIF

X 1, RS232C x 1, 20W in built speaker, IPS LED display, USB media player

8 MR Supply, Installation, Tetsing & Commissoning of 43" or more smart display with 4K resolution, native,

brightness : 350nits or better, Input : HDMI; DPI; USB2.0 X 2no. Or more, computer / server can be

controlled and accesed from display with screen share, wifi capability Certification : CE, FCC, BIS

compliance, EMC etc complete required as per specifications. Each 4 74436.96 297747.82

9 MR 32" commercial Touch Monitor with built-in Windows PC. 32" viewable TFT active matrix RESOLUTION 1920

x 1080 at 16 : 9 aspect ratio TOUCH SCREEN TECHNOLOGY Projected Capacitive TOUCH POINT S10-points

BRIGHTNESS 400cd/m2 CONTRAST 1300:1 VIEWING ANGLE 178/178° (L/R/U/D) TOUCH INPUT RESOLUTION

16, 384 x 16, 384 ON BOARD COMPUTER Intel i3 PC, 4GB RAM, 120GB SSD, Win10 OS, Wi-Fi

SUB TOTAL 5168438.37