Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.4 L+₹40,316 (2.02%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹21.3 L+₹1.4 L (6.77%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹21.7 L+₹1.7 L (8.57%)Rejected-AOC | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹21.9 L+₹1.9 L (9.40%)Rejected-AOC | L5 | Rejected-AOC Other than L1 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
17 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mathews M Shepherd, GE
GE (W) Mathura
SPECIAL REPAIR TO OTM ACCN (BLDG NO -13) UNDER GE (W) MATHURA
2023_MES_573219_3
8300/1121/E8
Open Tender
Civil Works
Item Rate
180 days
Mathura Cantt
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹48,000
Yes
22 Mar 2023
24 Feb 2023
18 Mar 2023
24 Feb 2023
17 Mar 2023
5 Mar 2023
Amount
Dismantling brick/concrete tiles any size complete all as specified and directed.
Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing the demolished material to a distance exc 250m but n. exc 500m and deposited where directed at a level n.exe 1.5m above starting point complete all as specified and directed.
M&L for Providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof padding complete all as specified and directed.
M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed. Note:- Srl item 1 to 4 will be executed for height upto G+1 story Bldg.
Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' old size brick straight or curved on plan to any radius built in CM (1:6) complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint over a coat of cement primer on walls etc complete all as specified and as directed.
M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coats of distemper oil emulsion distemper including appling a coat of wall care putty to acheive smooth finish to walls surface complete all as specified and as directed.
M&L for rendering 5mm thick in CM (1:4) on ceiling, finished surface even & smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for preparartion of old plastered surfaces of ceilling and applying two coat of white wash on ceiling complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
Demolition of cement concrete of any description and in any position complete all as specified and directed.
M&L Non skid coloured ceramic joint free tiles 8 to 9mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
S&F coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles including and over 10 mm thick screed bed in CM (1:4) complete all as specified and directed.
M&L for glazed ceramic tile 450x350x7 mm thick etc set and jointed in neat cement slurry and pointd in white or coloured cement on vertical surface over 10mm thick cement plaster in CM (1:4) complete all as specified and directed.
M&L vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.
M&L vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement screed bed in CM (1:4) complete all as specified and directed.
M&L for kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over and including cement plaster 15 mm thick in CM (1:3) laid and jointed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in CM (1:4) for laying finishes complete all as specified and directed.
Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.
Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.
S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
S&F powder coated aluminium anodised door with shutter of door frame of section 100x50x1.2mm and section of shutter in top, middle and bottom rail of 90x50x1.2mm and providing 5.50mm thick tinted glass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys in each opening and 01 No hydraluic door spring etc including taking down old Aluminium door shutter with chowkhat complete all as specified and directed.
S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.
S&F 30 mm thick 2nd class hard wood glazed & skelton shutters (factory made) open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rabated sash bars any number, edges of framing plain chamfered or rounded fitted with cut mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I Section- 8 clause 8.24 (a) and fitted to frames/chowkats as in door shutters. (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamels paints over a coat of pink primer complete all as specified & directed.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F factory made steel window with side hung shutter including box type hinges with steel peg stay and steel handle with glazing bar, dovetailed or welded with one shop coat of red oxide primer complete all as specified and directed.
S&F steel ventilators with centre hung shutters including hinges with steel handle & steel peg stay complete all as specified and directed.
S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.
M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.
S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for cutting holes in brick walls exceeding half brick wall but n.exc one brick wall, built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed.
M&L applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.
S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 150mm mild steel semi barrel tower bolt, riveted or spot welded type wih back plates, with bright bolt and open stable, and fix complete all as specified and directed.
S&F aluminium anodised barrel tower bolts, 200mm long of extruded section complete all as specified and directed.
S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed.
S&F 100mm Butt hinges, medium weight, stainless steel, and fixed complete all as specified and as directed.
Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.
M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connections 20 mm bore complete all as specified and as directed.
M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) of 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 1000 Ltr capacity complete all as specified and directed.
S&F 20mm dia PTMT ball valve high Pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min for 20mm - 210 gms) complete all as specified and directed.
S&F in repair gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 20 mm bore complete all as specified and directed.
S&F in repair 15mm bore chromium plated bib tap long shanks cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.
S&F vitreous china wash down, water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, CP jet including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rimcomplete all as specified and directed.
S&F in repairs vitreous china urinal, half stall type, white incl 15mm bore push tap any colour of PTMT screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixing discharge pipe, flush pipe, grating and union for discharge, complete all as specified and directed.
S&F in repairs 15mm bore Stop valves fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in replacement PVC connection 15 mm dia and 45 cm long with two Nos of brass check nuts and washers complete all as specified and directed.
S&F in replacement 32 mm dia PVC waste pipe for WHB complete all as specified and as directed.
S&F in repair chromium plated grating 125mm dia circular, fixing with cement mortar (1:3) on Nahani or floor tap complete all as specified and directed.
S&F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm with and waste fitting of PTMT, PVC connection and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed.
S&F in repair CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.
S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.
S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.
S&F in replacement cast iron floor trap including jointing to waste pipe 75mm dia of outlet in cement mortar (1:4) complete all as specified and as directed.
Taking down eaves gutters and rain water pipes, soil waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
S&F 100mm bore pipe cast iron soil and waste and vent pipes centrifuglly spun cast in any length with or without ears with cement joints laid in trenches or in floors including necessery earth work complete all as specified and directed.
S&F 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted complete all as specified and as directed.
S&F 100mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and directed.
S&F PVC (SWR) bends any radius of 75 mm bore, complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410 W (Gde E-250) quality-A complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F hollow corrugated shape PVC wall lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing including beading and fillets at site on PVC frame as per specifications all as specifed including dismantling complete all as specified and directed.
S&F in replacement looking mirror 700x500mm, 5mm thick glass mirror with double coat of protection and longevity grounded edges for safety and silvar plating on the back for better reflection, complete all as specified and directed.
M&L 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for sand filling under floors or in foundation complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.
M&L providing cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
M&L for 75mm thick cement concrete type C-2, (1:3:6) using 40mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and as directed.
Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and as directed.
M&L for Point wiring complete with 1.5 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLSH, PVC insulaed copper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.
All as per item No 90.00 (here-in-before) but for one light point controlled by two way switchs.
All as per item No 90.00 (here-in-before) but for one 5 pin socket outlet 5amps point controlled by one switch on independent board.
All as per item No 90.00 (here-in-before) but for one 5 pin socket outlet 5amps point controlled by one switch on the same board with other switches.
M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick polycarbonate sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.
M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick polycarbonate sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.
S&F bell push, flush type 6 Amp 240 volt polycorbonate body complete all as specified and directed.
S&F call bell ding dong AC 240 volts, single phase complete all as specified and directed.
S&F socket outlet flush type 3/6 pin suitable for 15 Amp plug top Multipurpose 230 volts all as specified & directed.
S&F socket outlet flush type 5 pin suitable for 5 Amp 230 Volts all as specified and directed.
S&F switch Piano flush type 5 amp single pole one way 230 volts all as specified & directed.
S&F switch Piano flush type 15 amp single pole one way 230 volts all as specified & directed.
S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.
S&F lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.
S&F in repair LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.
S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.
S&F decorative 10W mirror light LED environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.
S&F in replacement surface/ wall mounted 20 watt LED decorative batten, colour temperature -6500 deg kelvin, ultra slim lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed.
S&F hum free regulator electronic 5 step type fan regulator 240 volt ISI marked (socket type) including connecting up complete all as specified and directed.
S&F ceiling fans 1200mm sweep white in colour of Aluminium blades (three numbers) and body, double ball bearing, down rod, fan motor, pair of canopy shackle, assembly kit, electronic regulator with minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) etc suitable for SP 230 to 250 volts, 50 Hz, AC supply complete all as specified and directed.
Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height and removing its blades keep aside if fan is brunt/unsv/jam for repair or replace/deffective fan regulator, switch, fan condenser and refixing the same after repair/ overhauling/rewinding complete as directed by Engineer- in- charge.
S&F Exhaust fan 300mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery dishcarge 1710 CMH suitable for SP 230/250V, 50 Hz AC Supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 0.5 Sqmm single core, PVC insulated but sheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed.
S&F and commissioning water heater storage type BEE 5 star rating, with 2 KW heating element, electric complete of capacity 25 liters, vertical, metallic body including grouting of studs in wall in CM 1:3 nuts, washers and including two numbers PVC connection 600mm long with brass nuts and two number brass chromium plated angular valve suitable for 15mm bore pipe for water supply connection complete all as specified and directed.
M&L for cutting existing tubing and taking up for tapping/termination of pipe line, screwing including existing steel tubing of size 15mm dia complete all as specified and directed.
M&L for 15mm bore of steel tubing galvanized medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe with long shank and cup (concealed type) 15mm bore complete all as specified and directed.
S&F in repair 15mm bore fancy type, chromium plated stop valve cast copper alloy, with crutch or butterfly handle, screwed with both ends for iron pipe complete all as specified and directed.
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 25 mm dia with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.
S&F MCB SP 240 volts, 6-32 Amps, 10KA, B-Series complete all as specified and directed.
S&F MCB SPN 240 volts, 32 Amps 10KA, 'B' series complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification. complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F factory made sheet metal enclosers distributed board double door three phase 415 volts 4 way for MCCB 63 Amp, 4P as incoming and MCB (TP/SP) as outgoing comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed. Note : (i) The DB shall be VTPN specified makes listed in Appendix 'B'. (ii) The DB Shall be flush fixed and making good the distrubed surface matching with existing specification shall be part of job at no extra cost. (iii) Connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin / bottle type thimble-properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.
S&F in renewal of MCCB 4 pole 63 Amps, 415 volts, 16 KA rupturing capacity with adjustable thermal & magnatic setting complete all as specified and directed.
S&F MCB SPN 240 volts, 40 Amps 10KA, 'B' series complete all as specified and directed.
S&F in repair building security light of 30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed.
S&F in repair sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of 20 Amp all as required at site or directed complete all as specified and directed.
Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size all as specified. Note: Earth work and other connected work shall be measured & paid sperately.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pierholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft or loose soil complete all as specified and directed.
Returning, filling, in including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning and covering clean and dry sand to underground electric cable in trenches / floor complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.
M&L for bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.
S&F GI tubing light grade 50 mm dia along the wall/ in trenches/in duct/ in culvert/ road crossing and including provisioning of sitable mild steel flat iron clams and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.
ARCHI ENGINEERS
VANI CONSTRUCTION
CHOPRA ENTERPRISES
M/s Orient Traders
M/s Hoti Lal Contractor
M/S Diksha Construction Co.
SARTHAK CONSTRUCTIONS
R N AGRAWAL
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .