NIT NO. 28 ITEM NO. 5

Part A: Supply Supply of Sluice Valve PN – 1.0 flanged type of 100 mm dia. Make: - Kirloskar/ IVC / Marck/ Jupiter/ VAG/ Dorot

Supply of CI Non-Return Valve PN – 1.0 flanged type of 100 mm Size. Make: - Kirloskar/ IVC / Marck/ Jupiter/ VAG/ Dorot

Supply of foot valve 100 mm dia. Make: Kirloskar/ IVC / Marck/ Jupiter/ VAG/ Dorot

S/O Pressure Gauge having dial size of 100 mm dia. with all accessories of pressure gauge socket, bush etc. per site requirement. Make: - H.Guru/ Fibeig/ approved by DJB

Supply of nut bolts washers of good quality.

Supply of 50% neoprene rubber packing sheet of suitable size as per site requirement. Make: Jyoti/ National

Supply of 100 mm dia MS Black pipe medium B class. Make of pipe: - Jindal/ Tata/DJB Approved

Part B: Repairing of leakage from delivery system at AC Block Shalimar Bagh BPS by carrying out following works: Disconnection of electric motor P/set, remove from the base frame, remove charging line of vacuum pump set etc., cutting of foundation bolts with the help of gas cutter and taking out with the help of heavy labor.

Strengthening of RCC foundation by plastering & making a wet layer with material like cement, concrete, sand, etc. i/c supply and grouting of foundation bolts etc. as required.

Renovation of charging system by re-matling worn out sleeve, fixing bearings, studs, gland plate of charging pump and other specials like gate valves, Tee, bend, elbows etc. of suitable size as per site requirement

Installation of motor P/set i/c above E&M equipment along with Valve, NRV, all piping work & making, providing of specials like Bends, Tee, reducer, blank flanges & etc. as required & executing all allied E&M and civil work, laying of cable as per site requirement, making connection with thimble panel board by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement

Testing & commissioning of motor P/set i/c above all E&M equipment first at on No-load and then on On-load condition

Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

Repairing of leakage from suction system at BB (west) Shalimar Bagh BPS by carrying out following works: Dismantling of old damage line, valve, bend, pipes, and specials by manual labour, taking all safety measures and arrangement with proper welding, alignment, tightening the nut bolts, fixing of the packing sheet, making the joint leak proof.

D-watering of residual water from the UGR with the help of submersible pump set of required capacity to pump out from reservoir including pipes, panels etc. and provide spare pumps as stand by to use in case of any break down during shut down period.

Making of suction lines with the help of welding work and cutting of M.S. pipeas per site requirement & welding of M.S. Flange with the pipe, gas cutting arrangement as required and after that lowering of suction line with the help of manual labour by taking all safety guidelines as per instruction of Engineer in Charge

Re- assembling of suction line along with piping specials like valves, bends, flanges, rubber packing, nut-bolts etc. and the job includes opening and closing of intake UGR inlet valve with the help of manual labour. After completion of welding work testing of suction line for any leakage.

Testing & commissioning of motor P/set i/c above all E&M equipment first at on No-load and then on On-load condition.

Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

Repairing of leakage from delivery system at AD Block Shalimar Bagh BPS by carrying out following works: Disconnection of electric motor P/set, remove from the base frame, remove charging line of vacuum pump set etc., cutting of foundation bolts with the help of gas cutter and taking out with the help of heavy labor.

Repair of MS base frame of pump set by replacement of its worn-out parts to strengthen the MS structure by providing and fixing of MS plate on base frame by welding, cutting etc. as per sample.

Installation of motor P/set i/c above E&M equipment along with Valve, NRV, all piping work & making, providing of specials like Bends, Tee, reducer, blank flanges & etc. as required & executing all allied E&M and civil work, laying of cable as per site requirement, making connection with thimble panel board by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement

Testing & commissioning of motor P/set i/c above all E&M equipment first at on No-load and then on On-load condition

Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

WINGO BUILDTECH INDIA

Guruji Enterprises

M/s Vipin Enterprises

SANJAY SALES CORPORATION