CAMOUFLAGE PAINTING TO VARIOUS BLDGS OF EXPLOSIVE AREA OF NAD TROMBAY UNDER GE (NW) MANKHURD

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water, etc. including all necessary scaffolding as required and taking off rubbish outside Mud land, etc. complete all as specified and as directed.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:6, finished the surface even and smooth all as specified and as directed.

M & L Rendering 5 mm thick on fair faces of concrete surfaces using CM 1:3, finished the surface even and smooth in ceiling all as specified and as directed.

M&L for 20mm thick polymer modified ready mix cement based plaster in two layers (12 + 8 mm) on the wall surfaces, top layer of 8 mm mixed with liquid water proofing compound in the proportion as per manufacturer’s instructions and including finishing the surfaces of the top layer even and smooth, including scaffolding as required complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Notes : (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account. (ii) WPC shall be paid for separately.

Supply only integral water proofing compound

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness up to 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breaker without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. [Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.]

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for providing TMT bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, up to 20mm thickness while the bonding agent is still tacking, including leveling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including leveling, profiling etc, complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 60mm in thickness) with prebatched, prepacked, single component ready to use micro concrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, leveling, finishing, curing etc as per manufacturer's specifications and all other relevant works, complete all as specified and directed. (Note : Reinforcement only shall be measured and paid separately).

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L for 3 mm thick (minimum) white cement based wall care putty in two coats on new or old surfaces of walls/ceilings etc finished even and smooth, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall etc and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc, complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

Material and labour for preparation of old treated surfaces of any description and at any position and applying one coat acrylic exterior antifungal paint in camouflage pattern complete all as specified and as directed Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

Material and labour complete removal of old external treated surfaces of any description and at any position and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc, complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

M & L Preparation of old plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and as directed

All as per ser Item No 22 above but on ceiling.

M & L for washing rubbing down & stopping of distempered & painted surfaces of walls, preparation of surfaces & applying one coat of oil bound distemper complete all as specified & directed by EIC.

M&L complete removal of existing treatment and preparation of surface of wall and applying two coat of distemper oil-emulsion, of white or tinted over coat primer complete all as specified and directed.

M& L preparation of old painted wooden surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.

M& L preparation of old painted plastered surfaces on walls and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for filling of cracks in existing old surfaces of wall, chajjas, beams, parapets etc after cutting the same to V shape approximate 10mm wide and up to full depth of cracks with and including Chemistic crack seal caulking compound (Acrylic sealant) of M/s. Chemistik or equivalent of Dr. Fixit or of M/S STP Ltd as approved by the GE, also including necessary scaffoldings etc, complete all as specified and directed.

Removing plant/growth including its roots up to 1.00 metre of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed.

sahajanand const co.

AM ENTERPRISES

Parmatma Enterprises

Vishal Builders

M/s Mohd Altaf Hanif Qureshi