Supply erection and commissioning of VT pumps 5 Cs and 10 Cs Capacity at UG 800 mm dia RCC NP3 Pipeline at RD 1300-L Dadri feeder

Amount

Supply, Erection & Commissioning of 5 C/s axial/Mix Flow Water lubricated Vertical Flood Pumps of 5 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. having adjustable height, including strainer, MS Bend including flange welding, SS Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 30 HP, 1440 rpm, 3 Phase, 380 Volt+- 15%, with eficiency class IE2 suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department.

Supply, Erection & Commissioning of fully automatic Starter with ATS of cap. 150 Amp MCCB, suitable Contactors, auto phase corrector, micro controller based protection relays CT's with all allied accessories with 1 no MCB for lighting load, outgoing indicator, having MPR & all types of protections i.e.UV/OV/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, Seperate auto ON/OFF switch, seperate relay for single Phase protection etc. complete in all respect with double door frame suitable for open fields operation of 1 No. Motor of capacity of 30 HP with a stand of MS channel with canopy having suitable operating height above the kachha/Pakka fioor (including suitable size PVC 3 Phase submersible copper wire 20 mtr from starter to motor & 25 Mtr for starter's incomer side) as per approved specifications of the department. (suitable for voltage range 380 +- 15%,)

Supply, Erection & Commissioning of 10 C/s axial/Mix Flow Water lubricated Vertical Pumps of 10 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. with Y body, including Strainer, MS Bend including flange welding, SS Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 60 HP, 1440 rpm, 3 Phase, 380 Volt+- 15%, with eficiency class IE2 suitable for fitment with 10 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department

Supply, Erection & Commissioning of fully automatic Starter with ATS of cap. 250 Amp MCCB, suitable Contactors, auto phase corrector , micro controller based protection relays CT's with all allied accessories with 1 no MCB for lighting load, outgoing indicator, having MPR & all types of protections i.e.UV/OV/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, Seperate auto ON/OFF switch, seperate relay for single Phase protection etc. complete in all respect with double door frame suitable for open fields operation of 1 No. Motor of capacity of 60 HP with a stand of MS channel with canopy having suitable operating height above the kachha/Pakka fioor, (including suitable size PVC 3 Phase submersible copper wire 20 mtr from starter to motor & 25 Mtr for starter's incomer side) as per approved specifications of the department. (suitable for voltage range 380 +- 15%,)

Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia.made of MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber packing & other fitment accessory required)

Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

AADI SHAKTI ENTERPRISES