PROVN OF RAIN PROTECTION SHED FOR BLDG NOS 112,115,116 117 MD OFFRS ACCN AT QUEENS GARDEN, PROVN OF ALUMINIUM DOORS AND WINDOWS OF BLDG NO P 209 AT THE MLIRC, PROVN OF SANITARY FITTING AND PLUMBING WORK OF BLDG NO P 108 AT THE MLIRC, PROVN

Amount

Excavation in post holes each n. exc. 0.5 Cum and getting out, in hard/dense soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good the surface complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate in foundations filling and mass concrete, bed blocks/filling road cut portions and making good etc complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT)of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 completec all as specified and as directed .

Supply and fix Mild Steel work as in wind ties for roof ,hold fast , flats for screwing chain link fencing including securing bolts and similar work etc. including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed..

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer. complete all as specified and as directed.

Material and labour for Aluminium anodised sliding window (Double track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm including stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm for panel and provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note: (i) Each window shall be provided with 2 Nos of wire mesh shutter of required size. (ii) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets etc

(iii)Thickness of Anodisation shall be of 15 micron (iv) Make of Aluminium section : :Jindal/Hindalco/Indal

Material and labour for Aluminium anodised door with standard section of size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottom rail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet frosted glass in top panel and 4mm thick aluminium composit panel board including fitting etc with Aluminium die cast body hydraulic door closer ,designation no :01 , universal type ,Aluminium ,handle,Aluminium mortice lock heavy duty vertical type , size 100 mm and Double action floor door spring heavy duty ,hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover ,governing pivot made of brass and other parts made of mild steel etc complete all as specified and directed.

Notes: (i) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets etc (ii) Thickness of Anodisation shall be of 15 micron . (iii) Make of Aluminium section : :Jindal/Hindalco/Indal (iv) Make of Hydraulic door closer/Floor spring : Everite/Hardwyn (v) Make of mortice lock :Godrej/Harrison/Dhanraj (vi) Make of Glass : Saint gobain/Modi guard/Gold Fish

Material and labour for Machine cut Granite stone tiles, 20mm thick, Premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 including grinding and polishing and dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Material and labour for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick surfaces or PCC Block masonry surfaces ,finished even and smooth without using extra cement . including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (Acrylic distemper washable) over a preparatory coat of chalk whitning on plastered surface over a coat of priming plastered and other surfaces with alkali resistent primer complete all as specified and as directed.

Material and labour for Preparation of old steel surfaces of any description over 10 cm width or girth and applying oner coat of synthetic enamel paint . complete all as specified and as directed.

Supply and fix Premium quality Glazed ceramic tiles of size 350x450 x 7mm thick for dado and skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to receive tile including dismantling floor hearth or wall tiling and cement mortar bedding (but not backing) removing, rubbish off the premises complete all as specified and as directed. Note :Make of glazed ceramic tile :Johnson/Khajaria/Naveen

Supply and fix in repairs Vitreous China wash down colset pan (pedestal pattern),LYS-WHT-38751S250UFSM Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size:380x660x765 mm, S Trap-250mm, LYS-WHT-38201 Cistern with cistern fittings for 38751P180UFSM & 38751S250UFSM Set complete all as specified and as directed. Note :Make : Jaquar or equivalent product of Parryware Stanza Cat No : C847I (S-285mm) (685x370x735 mm) White / Hindware Italian Collection ELBA / RIMLESS Cat No : 92528 (S-22/S-30)) 62x37x67 cm Pastel as approved by GE.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and SS wall hook including making connections and fixed in position complete in all respect as specified. Note :Make :Jaguar/Hindware/Cera

Supply and fix CON-041KN 2 Way Bib Cock,with all accessories complete all as specified and as directed. Note :Make : Jaquar or equivalent product of Parryware Cat No : G4734A1 Two Way Bib Cock / Hindware Cat No : F330004CP Bib Cock 2 in 1 as approved by GE.

Supplying and laying of outer diameter 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed . Note : Make of CPVC Pipe : Ashirwad/Astral (ISI MARKED )

Supplying and laying of outer diameter 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed . Note : Make of CPVC Pipe : Ashirwad/Astral (ISI MARKED )

Excavation in trenches not exc. 1.5 metre deep and not exec 1.5 metre wide and getting out in any type of soil for foundation/up to top of drain complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundatioin, mass concrete and making good road cut portions/ floors, etc complete all as specified and as directed.

Material and labour for PCC 1:2:4, type B1 using 20mm graded stone aggregate as in , coping, bed blocks , kerb stone /on edges etc including necessary steel form work and surface finished fair and even complete all as specified and as directed.

Material and labour for Rendering 15 mm thick on fair faces of PCC block masonry or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of chalk whiting primer complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Supply and fix Rolled mild steel angle fixed independently, without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts and cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A.,complete all as specified and as directed

Supply and fix Mild steel deformed /TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, hooking ends and binding with mild steel (annealed) not less than 0.9mm dia. complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry in cement concrete block , PCC 1:3:6 type C1 ( using 20mm graded aggregate) set in cement mortar CM 1:6 complete all as specified and as directed .

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed .Note Make of MS fencing :TATA/RINL /SAIL

Supply and fix MS screw bolts (machine made) with hexagonal or square head at one end and screwed to other or screwed both ends ,each screwed end to be fitted with washers and one hexagonal or square nut of size n exc 5 cm long and 5 to 10mm dia shank bolt. complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed

Material and labour for Plain Cement concrete type B-0, 1;2;4 (Using 12.5mm graded stone aggregate ) as in damp proof course 25mm thick using water proofing compound complete all as specified and as directed . Note :Water proofing compound will be measured and paid seperately.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed

Material and labour fo PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 75 mm thick as in sub base of floor including necessary steel form work complete all as specified and as directed.

Material and labour for 25 mm thick plain cement concrete, 1:2:4 type B1, using 20 mm graded stone aggregate, as in sub base of floors etc including necessary steel form work complete all as specified and as directed.

Material and labour for Premium quality non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 completeall as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen

Supply and fix Mild steel deformed /TMT bars 5 to 10 mm dia as in stirrups/spacers , cut to length bent to shape required, including cranking, hooking ends and binding with mild steel (annealed) not less than 0.9mm dia. complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:11/2:3 type A1 ( using 20mm graded stone aggregate) as in foundations, including footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, and mass concrete or similar items complete all as specified and directed

Material and labour for Reinforced cement concrete in slab supported on walls, beams etc and shelves and the like, 1: 1½ :3 type-A 1 (using 20mm graded stone aggregate.) Complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:11/2:3 type A1 (using 20mm graded stone aggregate) as in Columns,Pillars or similar items Complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:11/2 :3 type A1 (using 20mm graded stone aggregate) as in beams, cantilever and lintels over 1.5 m span etc or similar items Complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:11/2 :3 type A1 (using 20mm graded stone aggregate) as in chajja or similar items complete all as specified and as directed

Material and labour for use and waste of steel form work to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces complete all as specified and as directed

Material and labour for use and waste of Steel form work to edges of concrete flats, n.exc 20 cm wide horizontal or slooping and similar works complete all as specified and as directed

Material and labour for use and waste of steel form work to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) for flat rough finished surfaces complete all as specified and directed.

Material and labour for use and waste of steel form work to sides & soffit of beams, bressumers, cantilevers,and supports etc for flat rough finished surfaces complete all as specified and directed.

Material and labour for use and waste of steel form work to sides of column , pillars,posts etc square,rectangular or polygonal etc for flat rough finished surfaces complete all as specified and directed.

Material and labour for use and waste of steel form work for Chullah hoods,Chajjas,troughs and similar item including edges etc complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick back rendering in cement mortor 1:6 on fair faces of brick work/PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed. Note : water proofing compound shall be measured and paid separately.

Material and labour for Rendering 5mm thick in cement mortar 1: 3 on soffit of roof ceiling, surface finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound . .Note :Make : Impemo/Roff/Cico

Material and labour for Preparation of new ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall case putty complete all as specified and as directed.

Material and labour for Preparing newly plastered surface of wall and applying two coats of exterior emulsion paint (Make :Apex ultima - Asian paint) over a coat of water based primer complete all as specified and as directed.

Material and labour for Rendering 10mm thick on concrete surfaces in CM 1:3 with water proofing compound and finishing the surface even & smooth without using extra cement all as directed . Note : Water proofing coumpund shall be measured separately .

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm over provide APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm incl minimum 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm over on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm complete all as specified and as directed .

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing . complete all as specified and as directed.

Supply and fix 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods.MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings complete all as specified and as directed

Material and labour for Aluminium anodized sliding window/Ventilaors (triple track) standard section of size 92 x 31.75 x 1.6 mm for bottom track, section size 92 x 31.75x 1.4 mm for side and top frame, section size 39 x 17 x 1.4 mm for top and bottom shutter rail, section size 39 x 17 x 1.4 mm for outer style, section size 39 x 27x 1.4 mm for inter lock style including fabrication to required size and fixed with 4 mm sheet glass oridinary quality, glazing, and rubber gas cut including fitting etc and provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note: (i) Each window shall be provided with 3 Nos of glass shutter of required size. (ii) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets etc . (iii) Make of Aluminium sections : Jindal Hindalco/Indal (iv) Make of Glass : saint Gobain/Modi guard/Gold Fish

Material and labour for Aluminium frame work as in doors, partitions and windows with one or more rebates using powder coated (Minimum thickness of Powder coating 50 micron) aluminium sections including provision of glazing clips, hinges, handles, joining cleats etc complete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. (iv) Make of Aluminium sections : Jindal Hindalco/Indal

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.

Supply and fix Stainless steel butt hinges medium weight 100mm size complete all as per specified and as directed.(ISI MARKED)

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed . Note :Make : classic/Crown/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed. Note :Make : classic/Crown/Adarsh

Supply and fix Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. Note :Make : classic/Crown/Adarsh

Supply and fix Rotational moulded PVC water storage tank , Double Layered (cylinderical vertical with closed top ) hoisted and fixed in position capacity 1000 ltrs with 20mm bore dia ball valve ,high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight :210 gms ) including supply and erect,connect pipe line inlet outlet etc complete all as specified and as directed Note :(i)Make of PVC tank :Sintex/Infra/Polycon. (ii) PTMT ball valve :Prayag/M/S Shakthi Industries

Material and labour for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection including necessary steel form work complete all as specified and as directed.

Supply and fix Vitreous china wash down water closet pan (pedestal pattern) cascad model with flushing cistern, white including flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc .complete all as specified and as directed.MAKE ; HINDWARE/ CERA /Jaguar

Material and labour for 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Material and labour for 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Supply and fix 15mm dia Bib taps, cast copper alloy Fancy type CP brass long body, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Note : Make : Metro/SEICO/GEM

Supply and fix 15mm dia Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed.Note : Make :Metro/SEICO/GEM

Supply and fix 15mm dia Stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Note : Make : : Make : Metro/SEICO/GEM

Supply and fix Swanneck Brass WHB CP Mixer for mixing hot and cold water screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Note :: Make : Jaguar/Hindware/CERA

Supply and fix Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe,complete all as specified and as directed. Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Make: Jaguar /Hindware/Marc

Supply and fix in repairs Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs completeall as specified and as directed. Note :Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039

Supply and fix in repairs Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed..Note :Make: Jaguar /Hindware/Marc.

Supply and fix in repair 15 mm bore Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Make: JAQUAR or equivalent model in JOHNSON/ SEICO

Supply and fix in repair Health faucet (ABS Body), mild steel chromium plated suitable for 15 mm dia pipe with1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix in repairs Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Make: Cat No. CAN-CHR-1111N of Jaguar or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS.

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and as directed Note:Make :Jaquar Wall Mixer CON-273KNUPR - CON-273KNUPR or equivalent model in Hindware/MARC

Material and labour for Machine cut Granite stone tiles, 20mm thick, premium quality, any colour, machine cut as in partition, platform etc bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including cutting and polishing types over screed bed 15mm thick screed bed in cement mortar 1:4 compete all as specified and as directed..

Supply and fix vitreous china urinal bowl type (back or corner wall type), of size 465mm x 355mm x 265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement compete all as specified and as directed..

Supply and fix 75mm dia PVC (SWR) floor traps plain with grating including jointing with solvent cement complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix Stainless stelel grating of 100mm Size Gde-I complete all as specified and as directed.(ISI MARKRED)

Material and labour for PVC (SWR) gully trap of size 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) vent cowl . Note : Make : Finolex/Supreme/Prince

Supply and fix Unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix Unplasticised PVC (UPVC) pipe 15mm bore of pressure rating 10 Kgf/cm2 with all fitting & fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince

Supply and fix Gun metal gate valve ,Full way with iron wheel head screwed boh ends for iron pipe of size 25mm bore dia ,heavy duty complete all as specified and as directed.Note :Make :Kartar/Leader/Kirloskar

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches. complete all as specified and as directed . .Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation, complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles of size 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floorsover and including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick for complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking paver block Glossy finish with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and as directed

Supply and fix Unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed to walls, ceilings or laid in floors /trenches complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested etc for 150mm dia bore SGSW /RCC pipe line, jointed in cement mortar 1:3 complete all as specified and as directed.

Material and labour for Salt-glazed stoneware drain pipe of 150mm internal dia pipes single socketed, in any length laid in trenches and jointed in cement mortar 1:3 complete all as specified and as directed.(ISI MARKED)

Material and labour for Providing precast cement concrete 1:2:4 type B1 ( using 20mm grade stone agg) in coping set in cement mortar 1:4 including necessary steel form work. complete all as specified and as directed.

Material and labour for PCC , 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base of surface channels and benching of drains complete all as specifed and as directed..

Material and labour for Extra for forming fair finished drain or channel of 25cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped end etc complete all as specified and as directed

Material and labour for Rendering 15mm thick other than fiar faces of brick/block masonry work in CM 1:6 and surface finished even and smooth using extra cement complete all as specified and as directed

Material and labour for Precast reinforced cement concrete manholes cover 1:2:4 type B-1, using 20mm graded stone aggregate set and jointed in CM 1:6.complete all as specified and as directed.

Material and labour for Preparation of steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Plain cement concrete type B-1 1:2:4 ( using 20mm graded stone aggregate) 40mm thick in flooring finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Glass dividing strips 3 mm thick width of strips 38mm and inserted in position confirm to design. complete all as specified and all as directed.

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed. (ISI MARKED)

Material and labour for floor door stopper of brass body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring ,fixed in door complete all as specified and as directed.Make :Classic/Crown/Adarsh

Supply and fix PVC (SWR) eaves gutter 150mm dia trapezodial shape Gde-I all as specified and directed. complete all as specified and as directed

Material and labour for Preparing newly plastered surfaces ofwalls and applying three coats of white wash, complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince

Material and labour for 110mm dia PVC pipe laid in trenches and jointed in CM 1:3 complete with collar inclding demolition and breaking up PCC and existing PVC drain pipes jointed incement mortar and taking out of trenches. complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince

Material and labour for 150mm dia RCC pipes class NP-2 ( ISI MARKED) laid in trenches and jointed in cement mortar 1:3 complete with collar inclding demolition and breaking up PCC and SGSW/RCC drain pipes of 150mm dia size jointed in cement mortar and taking out of trenches. complete all as specified and as directed

Description all as per item No :124 here in before but for 200mm dia

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) bed to drain pipes including packing under & haunching against the side of pipe after they are laid and tested in 110mm dia of PVC pipe . complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested etc for 200mm dia bore RCC pipe line, jointed in cement mortar 1:3 complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of old cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick and removal of rubbish off the premises complete all as specified and as directed .

Material and labour for Precast cement concrete solid block masonry in PCC 1:3:6, type C1 using 20mm graded stone aggregate, exc 10cm width set in CM 1:6 including demolition of precast concrete block walling, build in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed

Material and labour for PCC type C1, 1:3:6 (using 20mm graded stone aggregate) as in mass concrete and making good road cut portion/floor etc complete all as specified and as directed

Material and labour for Extra for forming fair finished drain or channel of any inner girth in cement concrete using extra cement including forms moulds mitred/stopped end etc complete all as specified and as directed.

Material and labour for Cleaning of existing sewage lines of 100mm to 150mm bore by rodding with split bamboo or any other means as approved and removal of blockage including taking out existing RCC cover slabs of manholes of any size without damaging the slab covers to facilitate cleaning and replacing back in original position & cleaning debris/sludge in pipe line of any type complete all as specifed and as directed.

Description all as per item No 132 here in before but for 200mm bore

Description all as per item No 132 here in before but for 300mm bore

Material and labour for Rendering on fair faces of Brick/concrete masonry surfaces in CM 1:4,15mm thick finishing the surface even & smooth without using extra cement including taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

De-silting of existing manholes of any size, depth not exceeding 1.5m and removing of clogged mud, muck, silt, floating materials, hard materials like stone/ brick bats, etc. from inside the manholes and mouth of pipes and removing the debris outside MD land complete all as specified and as directed. Notes: (a) The rate quoted shall be deemed to include taking out existing RCC cover slabs of manholes of any size without damaging the slab to facilitate cleaning and replacing back in original position. (b) The rate quoted deemed to include for clearing of vegetations, bushes, shrubs, etc. upto 2m all-round the manhole.

All as described in item No. 22 but depth of manholes exceeding 1.5m and not exceeding 3m

Supply and fix 18 to 20 mm thick Granite Galaxy Black stone slab fixed on concrete /wall surfaces over a backing coat of 12 mm thick in CM 1:3 and pointing in CM 1:2 using marble dust with admixture pigment to match the shade of the granite slab and dismantling of existing unserviceable tiles of any description and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for PCC type C1, 1:3:6 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed .

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed.

Supply and fix 8 inch heigt, 12 mm thick letters of Wood Plastic Composite material for base (laser cut ) and 3mm thick acrylic sheeting on top with glossy/reflective finish on letters of required colour ,pasted on granite slab with heavy duty glue complete all as specified and as directed.

Material and labour for Point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through and including non - metallic rigid PVC conduit and conduit accessories of 20 mm dia size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/Havellsl (ii) Make of PVC conduit and accesssories : Avon Plast/Presto plast /Garware

Description all as per in item No. 142 but for one fan/Exhaust Fan point controlled by one switch.

Description all as per in item No. 142 but for one 05 Amps socket outlet on the same board with other switches.

Supply and fix Switch piano flush type single pole, one way 6 Amps 230 Volts AC circuit complete all as specified and as directed. Make : Anchor/Legrand/Indo Asian

Supply and fix Socket outlet 2 in 1, 5 Pin 5 Amps, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells)

Supply and fix LED lighting fixture with aluminium heat sink energy efficient 20 watt LED 6K fitting complete all as specified and as directed . Make Havells Cat No: Lumiline plus or equivalent price and specification in Crompton/Phillips

Supply and fix Integral LED 25 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver including GI pipe medium grade bracket of suitable size fixed to pole /wallcomplete all as specified and as directed Make: Havells ENDURA Pearl OR equivalent price and specification in Crompton/Phillips

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep , 50 Hz , 1200 RPM ,copper winding with, blades, and frame and louvers ,Heavy Duty and including making suitable arrangement for fixing the exhaust fan i.e.,making suitable holes,grouting , anchor fastener bolts etc and matching the surface with existing surface and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed. Make : CG/Bajaj/Khaitan

Supply and fix Sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar double door type and including provision of 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. Make: Indo Asian / Havells /Legrand

Supply and fix MCB DP 63 A 10KA C series 50HZ AC supply, complete all as specified and as directed. Make: Indo Asian / Havells /Legrand

Supply and fix MCB SP 240 Volt of capacity 5 to 32 Amps‘C’ series, 50 HZ complete all as specified and as directed. Make: Indo Asian / Havells /Legrand

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc and getting out in any type of Soil complete all as specified and as directed.

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Supply and lay 40 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

M/s. VIJAY ELECTRICALS

M/s B C CHOUGULE

M/S MAHADEV M PATIL

DHANSHRI ENTERPRISES

M/s. KIRAN M CHOUGULE