CONSERVATION AND DEVELOPMENT WORKS FOR HERITAGE WALLED CITY AREA AND MONUMENTS (FACADE RESTORATION AND LLLUMINATION FOR BAZARS AND GATES OF JAIPUR WALLED CITY PACKAGE-1)

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) Excess (+) Less (-)

Tender Inviting Authority: EXECUTIVE ENGINEER (KISHANPOLE ZONE)

Name of Work: Conservation and Development Works for Heritage Walled City Area and Monuments ( Facade Restoration & Illumination for Bazars & Gates of Jaipur Walled City Package -1).

Contract No: EXECUTIVE ENGINEER (KISHANPOLE ZONE)/2025-26/127

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description (CIVIL WORK) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 (40.5) P & L Lime Surkhi Plaster lime surkhi mortar 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in specified course for base coarse and subsequent course & Loi, tamping, beating, curing till the shrinkage cracks are disappear. The work is to be done with all lead as the work is of restoration nature as per Jaipur practice including adding gur, methi & gugal on old walls including removal of all old loose and decade plaster, each coat to be done after 3 days of previous coat.

2 (40.5.1) 33 mm thick in four coats Sqm Excess(+) Full Conversion INR

3 (40.5.2) 45 mm thick in four coats Sqm Excess(+) Full Conversion INR

4 (40.7) Making Mehrab's, Arches, pillars, highly decorative creepers, flower of small sizes etc.in lime Surkhi plaster (1:2) as per traditional practices (Arches, Mehrab's) in three coats for base course and subsequent course and Loi tamping, beating till the shrinkage cracks are disappear than making ornamental flowering/design etc. The work is to done with all leads and lifts as per work of restoration nature as per Jaipur practice. Sqm Excess(+) Full Conversion INR

5 (40.8) Add extra over item no. 40.5 to 40.6 for Lime plaster work done over Spherical or groin ceiling/ladao ceiling of domes. Sqm Excess(+) Full Conversion INR

6 (40.9) Add extra over item no. 40.5 to 40.6 for Lime plaster work done over flat ceiling 20% Sqm Excess(+) Full Conversion INR

7 (40.1) Add extra over item no. 40.5 to 40.6 for Lime plaster work done over curved/circular masonry work (curved or circular surface.) Sqm Excess(+) Full Conversion INR

8 (40.13) Flush and ruled pointing over joints of dressed stone cladding, chajjas, jali etc. including racking the joints as per traditional practice including all leads and lifts with grinded mortar of lime putty and surkhi mixed in 1:2 ratio and gur, methi, gugal etc. are to be mixed as per traditional practice. Sqm Excess(+) Full Conversion INR

9 (40.15) Araish plaster (as per Jaipur practice) 1:2 ( 1 lime : 2 Zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6 mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round. Sqm Excess(+) Full Conversion INR

10 (40.16) Coloured plain Araish work 1:2 (1 lime : 2 zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round including desired colour stone pigment to match the existing colour Sqm Excess(+) Full Conversion INR

11 (40.17) Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured, Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing Sqm Excess(+) Full Conversion INR

12 (40.18) Stucco work in lime, Surkhi, mortar (1:2) as per existing design work/ traditional practices by skilled craftsman, the stucco work should be done as per restoration nature, the mortar should be prepared by grinding mill adding gur, methi & gugal.. The thickness varies from 50 mm to 100mm as per the design (minimum rectangular surface area to be measured). Sqm Excess(+) Full Conversion INR

13 (40.19) Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually on lime base, on ceiling and all flat surface in two coats. First coat applying 3 mm to 4 mm thick and curing properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice.(thickness not more than 6 mm.) Sqm Excess(+) Full Conversion INR

14 (40.2) Add extra for Lime Kara work (on lime plaster base) other than flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on :

15 (40.20.1) Domical surface/spherical/domical ceiling. Sqm Excess(+) Full Conversion INR

16 (40.20.2) Curved surface Sqm Excess(+) Full Conversion INR

17 (40.22) Tuman masonry by brick bats/ stones in grinded mortar of Lime Surkhi mortar 1:2/lime sand mortar 1:2 including racking and removal of all old loose plaster and cleaning the wall surface properly as per direction of Engineer In-charge Sqm Excess(+) Full Conversion INR

18 (40.23) Making Kangura on top of the wall as per Jaipur traditional practice with tile brick bats/stones in grinded Lime Surkhi mortar 1:2 thickness of kangoora 15cm & height 45cm, finishing with lime Surkhi mortar 1:2 complete in all respect up to 10.00 meter from ground level including all scaffolding, lead & lift. metre Excess(+) Full Conversion INR

19 (40.24) Removing of old lime plaster up to 75 mm thick in patches with height up to 4.5 m. Disposal up to 100 meter lead Sqm Excess(+) Full Conversion INR

20 (40.25) Scraping & Removing of white wash/ distemper/algli etc. from plain plaster & surfaces gently with care to keep intact the old designs Sqm Excess(+) Full Conversion INR

21 (40.26) Scraping & Removing of white wash/ distemper/oil paint /algli etc. from lime plaster highly decorative, ornamental and stucco work with at most care by using fine sand paper under the close supervision to keep intact the old designs Sqm Excess(+) Full Conversion INR

22 (40.28) Providing and fixing stone Patties (slab) on roofing including removing broken patties carefully and replacement new slab with kharanja, ralthal and lime dhar as per traditional practice. Span about 3.30mtr. To 5.50mtr. 100 mm to 150mm thick of approved stone. Sqm Excess(+) Full Conversion INR

23 (40.29) Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150 mm thick as per specifications. including dismantling of old detoriated roofing. Sqm Excess(+) Full Conversion INR

24 (40.3) Painting on Stucco work with stone colours including base coat of khameera as per traditional practice. Sqm Excess(+) Full Conversion INR

25 (40.34) De-vegetation from monument by removing bushes, trees including complete uprooting from the wall & roofs/structures carefully including sutaible chemical treatment to roots to avoid further growth including disposal of rubbish with in 50mtr. Lead as per direction of Engineer incharge. Sqm. Excess(+) Full Conversion INR

26 (28.1.1) Providing & fixing door, window, chowkhats and other frames, including anti termite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade Second class teak wood Cum Excess(+) Full Conversion INR

27 (28.7.4.2) Float glass-5 mm thick Sqm. Excess(+) Full Conversion INR

28 (40.35) Providing and fixing double leaf door wooden shutters made of Ist grade wood as per trditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect :

29 (40.35.1) M.P teak wood grade Ist Sqm Excess(+) Full Conversion INR

30 (40.36) Providing and fixing double leaf Window wooden shutters made of Ist grade wood as per trditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect : Sheesham wood grade Ist.

31 (40.36.1) M.P teak wood grade Ist Sqm Excess(+) Full Conversion INR

32 (40.37) Add extra for brass fittings inplace of M.S./ G.I fittings over item no. 8.1 & item no. 8.2

33 (40.37.1) (a) for doors (deshi pattern double leaf shutters ) Sqm Excess(+) Full Conversion INR

34 (40.37.2) (b) for windows (deshi pattern double leaf window shutters ) Sqm Excess(+) Full Conversion INR

35 (40.39) Providing and applying ceilent adhesive to existing cracks by suitable silicon or equivalent ceilent complete in all respect and making it complete water-proof as per direction of the Engineer-in-charge. Meter Excess(+) Full Conversion INR

36 (40.43) Chemical treatment of sand stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proof. Sqm Excess(+) Full Conversion INR

37 (40.44) Chemical treatment of marble stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proo Sqm Excess(+) Full Conversion INR

38 (40.46) Conservation of plain araish in monuments by cleaning of the painted surface from dust, dirt, greasy & oily all types of accretions with the help of suitable chemicals, removal of cracks and holes, consolidation of plaster, filling of the lacunae in the plaster, treatment of salt effect, restoration of the lost portions and providing a preservative coating. Sqm Excess(+) Full Conversion INR

39 (40.47) Conservation of coloured araish with designs in fresco technique in monuments by cleaning of the painted surface from dust, dirt, greasy & oily accretions etc. with the help of suitable chamicals, removal of cracks and holes, consolidation of flaking paint layer, filling of the lacunae in the plaster, treatment of salt effect providing a preservative coating. Sqm Excess(+) Full Conversion INR

40 (40.57) Removal & fixing of stone base moulded as per existing design with fine finishing fixing in grinded lime mortar (1:2) i/c all lead a lift complete in all respect.- Extra for carving (Pan Patti) 100 mm thick to 150 mm thick Meter Excess(+) Full Conversion INR

41 (40.59) Providing and fixing fine dressed sand stone/approved stone Traditional work as per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making groove etc. complete in all respect. Sqm Excess(+) Full Conversion INR

42 (40.61) Propping with steel to support the leaned structure ( roof and wall) using pipes, channels, angles, girders , wooden wages to prevent further leaning/ collapse ,mode of measurement( 1.the plan area of the propping shall be for payment purpose. 2. the payment will be made once only for execution of all item such work. ) Sqm Excess(+) Full Conversion INR

43 (40.7) Removal , providing and re fixing of stone dasa moulded as per existing design with fine finishing fixing in grinded lime mortar 1:2 i/c all lead and lift complete in all respect. extra for carving (pan patti)- 100mm thick Meter Excess(+) Full Conversion INR

44 (26.26) Supplying and fixing machine cut dressed 75 mm Pink sand stone (Bansi Paharpur) dasa/ coping with ornamental shape having moulding and "PAN Shape" engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shad Sqm Excess(+) Full Conversion INR

45 (10.7) Painting new letters and figures of specified size, of any shade with first quality synthetic enamel paint, black or any other approved colour to give an even shade as per clause 801 of MoRT&H Specification including all material, labour.

46 (10.7.1) Hindi (Matras, Commas and the like not to be measured and paid for. Half letters shall be counted as half). cm. Height per letter Excess(+) Full Conversion INR

47 (10.7.2) English and Roman (Hyphens, commas and the like not to be measured and paid for) cm. Height per letter Excess(+) Full Conversion INR

48 (31.39.2) Providing lead caulked joints to sand cast iron rain water pipes and fittings 150 mm dia. Pipe Each Excess(+) Full Conversion INR

49 (31.40.1.1) Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron plain shoes : 150 mm diameter Each Excess(+) Full Conversion INR

50 (31.41) Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion

51 (31.41.1) 75 mm diameter metre Excess(+) Full Conversion INR

52 (31.41.2) 110 mm diameter metre Excess(+) Full Conversion INR

53 (31.42) Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansio Bend 87.5°

54 (31.42.5.1) 75 mm bend each Excess(+) Full Conversion INR

55 (31.42.5.2) 110 mm bend each Excess(+) Full Conversion INR

56 (31.38) Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc

57 (31.38.1) For 150 mm dia. Pipe Each Excess(+) Full Conversion INR

58 (36.65) Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

59 (36.65.1) 100 mm diameter pipe Meter Excess(+) Full Conversion INR

60 (36.66) Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc :

61 (36.66.1) 100 mm diameter pipe Meter Excess(+) Full Conversion INR

62 (2.4) Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer

63 (2.4.1) Lime Concrete, cement concrete grade M-10 (1:5:10) and below Cum Excess(+) Full Conversion INR

64 (2.4.2) Cement Concrete Grade M-15 and above and PCC blocks Cum Excess(+) Full Conversion INR

65 (2.4.3) Prestressed /Reinforced cement concrete with separating, cleaning, straightening and cutting of bars Cum Excess(+) Full Conversion INR

66 (2.4.5.1) Dismantling Stone Masonry Rubble stone masonry in lime mortar Cum Excess(+) Full Conversion INR

67 (2.4.5.2) Dismantling Stone Masonry Rubble stone masonry in cement mortar. Cum Excess(+) Full Conversion INR

68 (2.4.7) Steel work in all type sections up to a height of 5 metre above plinth level (Riveted work where rivet are required to be cut shall be measured and paid separately)

69 (2.4.7.2) Excluding dismembering tonne Excess(+) Full Conversion INR

70 (2.1) Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by Engineer Bituminous courses Cum Excess(+) Full Conversion INR

71 (2.12) Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre as per MoRT&H specification clause 202 Meter Excess(+) Full Conversion INR

72 (3.1) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar Cum Excess(+) Full Conversion INR

73 (3.23.3) Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 150 mm dia pipe Meter Excess(+) Full Conversion INR

74 (3.24.1) Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore Meter Excess(+) Full Conversion INR

75 (3.25.1) Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of Engineer-in-charge Upto 150 mm diameter Meter Excess(+) Full Conversion INR

76 (3.3) Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 metres lead including refilling the excavated gap. each Excess(+) Full Conversion INR

77 (3.2) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

78 (3.2.2) For thickness of tiles above 25 mm and upto 40 mm Sqm Excess(+) Full Conversion INR

79 (3.6) Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Sqm Excess(+) Full Conversion INR

80 (3.8) Demolishing mud phaska in terracing and disposal of material within 50 metres lead Cum Excess(+) Full Conversion INR

81 (33.49) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Sqm Excess(+) Full Conversion INR

82 (4.2.1) Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301 In all type of soil Cum Excess(+) Full Conversion INR

83 (4.27) Providing and fixing Barricading at site of work for restricting the general public using 80-100 mm dia Wooden Ballies as vertical post with average spacing of 1.80 meter between two vertical posts, having height at least 1.5 m above road/ ground level and at least 30-45 cm below road/ ground level by making suitable size hole in road/ ground, providing and fixing suitably two rows of 100mm wide PVC Tape preferably of red colour. The vertical members shall be painted in red and white colour strips as per approved pattern as and when it becomes shabby but at least after every alternate shifting at new location. After shifting/ removal of barricading holes shall be filled up properly and site is to be cleared in all respect. (Note: measurement is to be done in linear basis) Sqm Excess(+) Full Conversion INR

84 (21.1.5) Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Cum Excess(+) Full Conversion INR

85 (9.13) Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. Sqm Excess(+) Full Conversion INR

86 (9.14) Removing & re-fixing of stone slab flooring set in pattern over 20 mm thick base of cement mortar 1:6 (1 cement : 6 course sand) and finished with cement sand mortar 1:3 complete in all respect. Sqm Excess(+) Full Conversion INR

87 (24.5.2) Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum Excess(+) Full Conversion INR

88 (25.1.1) Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) Cum Excess(+) Full Conversion INR

89 (25.2) Extra for random rubble masonry with hard stone in superstructure above plinth level and upto two stories. Cum Excess(+) Full Conversion INR

90 (32.3.2) Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:4 (1 cement : 4 fine/ coarse sand) Sqm Excess(+) Full Conversion INR

91 (32.1) Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. per 50 kg cement bag Excess(+) Full Conversion INR

92 (38.3) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) Sqm Excess(+) Full Conversion INR

93 (30.29) 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar

94 (30.29.1) Red sand stone Sqm Excess(+) Full Conversion INR

95 (30.29.2) White sand stone Sqm Excess(+) Full Conversion INR

96 (30.3) Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab Meter Excess(+) Full Conversion INR

97 (32.51.1) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Sqm Excess(+) Full Conversion INR

98 (26.1) Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) :

99 (26.1.2.5) Red sand stone - Exposed face machine cut and table rubbed with rough backing. 30 mm thick Sqm Excess(+) Full Conversion INR

100 (26.3) Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required. Kg Excess(+) Full Conversion INR

101 (29.26.2) Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg Excess(+) Full Conversion INR

102 (39.12.2) Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. (The good earth shall be paid separately) In rows 7.5 cm apart in either direction Sqm Excess(+) Full Conversion INR

103 (39.3) Supplying and stacking good earth at site of work. Note: 1) Loading, unloading and carriage to be paid extra as per actual lead. 2) Earth measured in stacks will be reduced by 20% foe payment Cum Excess(+) Full Conversion INR

104 (39.4) Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in-charge including screening and stacking Cum Excess(+) Full Conversion INR

105 (39.11) Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately). Cum Excess(+) Full Conversion INR

106 (39.15) Filling mixture of earth and sludge farm-yard manure in the desired proportion in trenches, flooding with water and levelling (cost of supplying earth and sludge or farm yard manure and labour for mixing not included in this rate). Sqm Excess(+) Full Conversion INR

107 (39.35) Wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. quintal Excess(+) Full Conversion INR

108 (39.43) Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 600 mm min. height shurbs at site in 0.45 m dia holes, 0.45 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required

109 (39.43.1) Rhaphis excelsa with 3-4 suckers ( Lady Palm) Each Excess(+) Full Conversion INR

110 (39.43.2) Furcaria with 10-12 leaves ( cactus) Each Excess(+) Full Conversion INR

111 (39.44) Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.

112 (39.44.1) Plumeria alba ( Champa) Each Excess(+) Full Conversion INR

113 (39.44.14) Bougain villea Each Excess(+) Full Conversion INR

114 (39.44.16) Table palm Each Excess(+) Full Conversion INR

115 (1.1.3) Carriage of Materials (Stone, boulders, gravelly material) by mechanical transport upto distance of 20 kms including loading, unloading and stacking Cum Excess(+) Full Conversion INR

116 (3.35) Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. Sqm Excess(+) Full Conversion INR

117 (23.1) Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level

118 (23.1.3) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum Excess(+) Full Conversion INR

119 (23.19) Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete

120 (23.19.6) Thermo-Mechanically Treated bars Kg Excess(+) Full Conversion INR

121 (22.1) Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for

122 (22.1.1) Foundations, footings, bases of columns, etc. for mass concrete. Sqm Excess(+) Full Conversion INR

123 (29.32) Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects . including all materials labour, finishing etc complete Kg Excess(+) Full Conversion INR

124 (27.1.1.3) Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) or slab in wall, steps, pillars, counters, jambs, shelves, sills etc laid over 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand), jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Makrana 'Adanga'. Above 3601 Cm2 Slabs Sqm Excess(+) Full Conversion INR

125 (23.1) Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level

126 (23.1.2) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum Excess(+) Full Conversion INR

127 (PWD BSR (2022) 14.3) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Cum Excess(+) Full Conversion INR

128 (PWD BSR (2022) 14.5) Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge Sqm Excess(+) Full Conversion INR

129 (PWD BSR (2022) 12.5) Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect:

130 (PWD BSR (2022) 12.50.1) New Surface Sqm Excess(+) Full Conversion INR

131 (PWD BSR (2022) 12.50.2) Old Surface Sqm Excess(+) Full Conversion INR

132 (PWD BSR (2022) 14.56) Dismantling CC jali including cost of making grooves in plaster and making good and including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. . Sqm Excess(+) Full Conversion INR

133 (PWD BSR (2022) 14.54) Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead :

134 (PWD BSR (2022) 14.54.2) Above 1.44 Sqm to 2.52 Sqm Sqm Excess(+) Full Conversion INR

135 (PWD BSR (2022) 14.54.3) Above 2.52 Sqm to 3.84 Sqm Sqm Excess(+) Full Conversion INR

136 (PWD BSR (2022) 3.9.4) P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of approved make in wall or in floor with M.S. holder bat clamps in 10 X 10 X 10 Cm. M-15 grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall: 150mm dia Mtr. Excess(+) Full Conversion INR

137 (PWD BSR (2022) 3.11.4) P &F S.C.I. Fittings (IS : 1729 mark) in CM 1:4 with spun yarn.

138 ((i)) Socket Each Excess(+) Full Conversion INR

139 ((ii)) Cowel Each Excess(+) Full Conversion INR

140 ((iii)) Bend Each Excess(+) Full Conversion INR

141 (A&M BSR (2011)3.11) Making Bend -patta, Cornice, Gola & String course with katla stone and Lime surkhi mortar 1:2 (projected ) and finishing with grinded Lime surkhi mortar 1:2 including moulding/ design work as per existing matching at site complete in all respect.

142 (3.11.2) Size 10cm X 7.50cm. Rmtr. Excess(+) Full Conversion INR

143 (3.11.3) Size 15cm X 10cm. Rmtr. Excess(+) Full Conversion INR

144 (A&M BSR (2011) 5.3) Providing & fixing ashlar "Rain water Spouts" (3) lines dressed as per traditional practice / existing design / approved design size 60 x 30 x 25 cm, fixing the rain water spout with lime surkhi mortar 1:2, with proper slope complete in all respect. Each Excess(+) Full Conversion INR

145 (A&M BSR (2011) 7.3) Providing, casting, curing, erecting and fixing in position Lime Jali (lime lattice ) 40mm to 50mm thick as per existing design and pattern with grinded lime surkhi mortar 1:2 adding gur, methi gugal etc. as per specification complete in all respect including all scaffolding. Sqm Excess(+) Full Conversion INR

146 (A&M BSR (2011) 5.12) Providing and fixing "Stone Kalasha" as per existing matching on doms od chattries/jharokhas as per existing design & dimensions as per traditional practices, fixing of kalash carefully without damaging the doms complete in all respect.

147 (5.12.1) (a) Marble Kalasha (i) Kalasha height.(exposed part) 45cm. to 60cm. Each Excess(+) Full Conversion INR

148 (5.12.4) (b) Sand stone/approved stone Kalasha (i) Kalasha height.(exposed part) 45cm. to 60cm. Each Excess(+) Full Conversion INR

149 (A&M BSR (2011) 3.4) Add extra for decorative/ornamental Lime surkhi 1:2 plaster work with fine finish making kangoora, flowers, geometrical designs upto (khat) including preparation of Lime surkhi mortar 1:2 as per tradititional practice adding gur,methi,gugal etc.

150 (3.4.1) Upto 25mm thick/depth Sqm Excess(+) Full Conversion INR

151 (3.4.2) Above 25mm and upto 40mm thick Sqm Excess(+) Full Conversion INR

152 (A&M BSR (2011) 3.1) Making Gardana under ceiling/ chajja with katla stone and grinded Lime surkhi mortar 1:2 including moulding work and fine finishing with grinded Lime surkhi mortar 1:2 as per existing matching/ traditional practice completev in all respect;.

153 (3.10.1) Size 15cm X 15cm. RM Excess(+) Full Conversion INR

154 (3.10.2) Size 20cm X 20cm. RM Excess(+) Full Conversion INR

155 (A&M BSR (2011) 4.8) Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually (on lime surkhi/sand plaster base) on decorative/ornamental lime plaster in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.) Sqm Excess(+) Full Conversion INR

156 (A&M BSR (2011) 5.1) Providing and fixing "Corrugated" surface sand stone/approved stone flooring for ramp-way with fine dressed corrugation work as per approved design and size over a base of of grinded Lime surkhi mortar 1:2 and jointed with masaldar lime putty and stone powder 1:1 with an adixure of pigment, complete in all respect, as per direction of Engineer Incharge. (a) 75 mm. thick stone slab Sqm Excess(+) Full Conversion INR

157 (5A&M BSR (2011) 5.5) Providing & fixing fine dressed machine cut sand stone Stone steps (Treads & risers) with round nising as per existing matching fixing in lime surkhi mortar 1:2 including pointing in lime cream and stone dust 1:1 with an admixture (50mm to 60mm thick) Sqm Excess(+) Full Conversion INR

158 (A&M BSR (2011) 5.7) Providing and Fixing fine dressed sand stone approved stone" Railing" as per existing design and matching with thambli,fixing of railing with proper adhesive /clips complete in all respect (thambli & clips paid seperately.)

159 (5.7.1) (a) 50 mm. thick with moulding/lining. Sqm Excess(+) Full Conversion INR

160 (5A&M BSR (2011) 5.9) Providing and Fixing fine dressed sand stone /approved stone "Thambli" (katahara pillers including) kalash on top,fixing on dasa as per existing design for fixing of stone jalies/railings including making grooves as per required size. (a) Size 100x100x750mm including kalash with moulding. Each Excess(+) Full Conversion INR

161 (A&M BSR (2011) 5.13) Providing and fixing fine dressed sand stone "Dasa/coping" as per existing matching , fixing in grinded lime surkhi mortar 1:2 including pointing in cream and stone powder 1:1 with an admixture of pigment to match the shade of stone complete in all respect. (c) 75mm to 100mm thick with pan patti design. Sqm Excess(+) Full Conversion INR

162 (A&M BSR (2011) 5.16) Providing and fixing fine dressed sand stone/approved stone "JALI"as per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making groove etc. complete in all respect. (b) 50mm thick. Sqm Excess(+) Full Conversion INR

163 (A&M BSR (2011) 5.2) Providing and fixing fine dressed 35mm to 40mm thick " flooring " with white/light pink sand stone (machine grinded surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing finished flush with lime putty and stone powder with an admixture of pigment complete in all respect. Sqm Excess(+) Full Conversion INR

164 (A&M BSR (2011) 5.21) Providing and fixing fine dressed sand stone "Todies" (Brackets) as per existing matching stone with moulding work with fine finishing , fixing in grinded lime surkhi mortar 1:2 including scaffolding, lead & lift complete in all respect.

165 (5.21.2) (b)Size : 60cm X 45cm X 7.50cm (exposed part only.) Each Excess(+) Full Conversion INR

166 (5.21.3) (c) Size : 90cm X 60cm X 10cm (exposed part only.) Each Excess(+) Full Conversion INR

167 (A&M BSR (2011) 5.24) Random Rubble stone masonary for foundation and plinth in Lime surkhi mortar 1:2 above 30cm. thick walls in : ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.) Cum Excess(+) Full Conversion INR

168 (A&M BSR (2011) 5.25) Random Rubble stone masonary for superstructure, 4.50mtr. Height above plinth level/ one storey height above 30cm. thick walls in : Lime surkhi mortar 1:2 ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.) Cum Excess(+) Full Conversion INR

169 (A&M BSR (2011) 5.27) Providing and laying lime concrete in foundation and plinth using 40% lime mortar and 20mm nominal size graded aggregate (crusher broken ) including ramming and watering complete in all respect comprising of : ( 1 Lime putty : 2 Surkhi mortar.) Cum Excess(+) Full Conversion INR

170 (A&M BSR (2011) 5.23) Construction of "Kangoora" with stone masonary in grinded Lime surkhi/ sand mortar 1:2 on fort wall as per existing matching & traditional practice including making holes and teerkash etc. matching with existing work complete in all respect including all scaffolding with all lead and lift. Cum Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) Excess (+) Less (-)

Tender Inviting Authority: EXECUTIVE ENGINEER (KISHANPOLE ZONE)

Name of Work: Conservation and Development Works for Heritage Walled City Area and Monuments ( Facade Restoration & Illumination for Bazars & Gates of Jaipur Walled City Package -1).

Contract No: EXECUTIVE ENGINEER (KISHANPOLE ZONE)/2025-26/127

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description (ELECTRICAL WORK) Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 (57.26) SITC of IP-42 and general construction confirming to IEC 61439 1&2. type tested assembly (TTA) wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- (a) Panel having short circuit withstand capacity of minimum of 50 kA for 1s (Icw rating) at 415 V, 50 HZ AC supply, Rated Impulse withstand voltage (Uimp) of 12kV for withstanding against transient Overvoltages, mechanical impact level of IK10 level and internal arc for 50kA for 0.3 second with aluminum busbar and fully type tested at an Independent Laboratory, Type test certifacte has to be submitted for all rating of LV Switchgear to be used in Panel. (b) All four Horizontal Busbars shall be in same compartment. Certified design of switchboards shall be proven design from OEM (Switchgear Manufacturer). OEM name should be mentioned on top of each column of switchboard. Also, OEM Partnership Certificate shall be furnished by Panel builder. Panel shall be fabricated with a double door arrangement. Front Door shall be fitted with transparent Glass to allow maintenance staff to visually access device status, meter readings, indicating lamp status without opening the door. (c) Panels and cubicles shall be fabricated with CRCA Sheet Steel of thickness, same as as per OEM Design. Sheet Steel having vibration free structure chemically treated with nine tank process before painting for surface treatment and powder coated, with suitable sq mtr Excess(+) Full Conversion INR

2 electrolytic grade high conductivity Aluminium busbar extensible type, busbar supports, ( Cost of Bus bar / Flexible wire for Interconnection between Main busbar and Switchgear is to be Paid Extra )(d) Wiring between components within switchgear and Incoming / outgoing cable shall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. (e) All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. (f) Floor mounted panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm ( to be paid Extra ) (g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test and Heat run test(type test) shall also be carried out. (h) only outer surface area on all sides shall be measured & panel to be fabricated only from Switchgear OEM approved fabricators only. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

3 (57.2) Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

4 (57.2.1) Electrolytic grade Aluminium bus bar 6010 grade kg Excess(+) Full Conversion INR

5 (57.3) Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type (up to 500) V range Volt meter / Direct- Ammeter / CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

6 (57.3.10) Three phase with universal Auxiliary supply + AMP + HZ + PF + KW + KVA + KVAR + KVARH + KWH + DUAL ENERGY+ ENERGY+THD-I, THD-V & RUN HRS + MD with RS485 each Excess(+) Full Conversion INR

7 (57.4) Providing & Fixing of BIS approved Current Transformer as per PWD specification for electrical Works ,ISI marked as per IS 2705 1992/ conforming to IEC 60044-1, with secondary terminal of CT shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as required Current transformer Ring Type Tape Wound/Resin Cast Wound as per IS 16227 with, Accuracy Cl, CT ratio and burden as specified. ISF<=5, Cu cross section of secondary wire 1.5sqmm (minimum), including all necessary support in existing panel including connection etc. as required . All as per pre approved by Engineer in-charge.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

8 (57.4.2) Resin cast wound type CT

9 (57.4.2.2) C T Class 1, Ratio 200/5 to 300/5, Burden 10 VA each Excess(+) Full Conversion INR

10 () Providing & Fixing of 110/220 V, unibody LED Indicating lamp IEC 60947 with integral circuit, IP 65 above panel & IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tin plated), impulse dielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDC including connection etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

11 (57.8.1) Red/yellow/Green colour each Excess(+) Full Conversion INR

12 (57.8.2) Blue / white Colour each Excess(+) Full Conversion INR

13 (58.3) SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% ICU. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

14 (58.3.3) 4 pole MCCB With Thermal Magnetic release

15 (58.3.3.3) 125 Amp , 25 kA, adjustable O/L & adjustable S/C setting, Each Excess(+) Full Conversion INR

16 (58.3.3.2) up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting, Each Excess(+) Full Conversion INR

17 (58.3.3.6) 250 Amp , 25 kA, adjustable O/L & adjustable S/C setting, Each Excess(+) Full Conversion INR

18 (60.4) Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Excess(+)

19 (60.4.1) 1.5 Sq. mm Excess(+)

20 (60.4.1.1) 2 core Mtr Excess(+) Full Conversion INR

21 (60.4.1.2) 3 core Mtr Excess(+) Full Conversion INR

22 (60.4.2) 2.5 Sq. mm Excess(+)

23 (60.4.2.2) 3 core Mtr Excess(+) Full Conversion INR

24 (55.1) Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Excess(+)

25 (55.1.1) Single pole MCB (With B/C curve tripping Characteristics Excess(+)

26 (55.1.1.2) 6 A to 32 A rating Each Excess(+) Full Conversion INR

27 (55.1.2) Double pole MCB(With B/C curve tripping Characteristics) Excess(+)

28 (55.1.2.2) 6 A to 32 A rating Each Excess(+) Full Conversion INR

29 (55.1.2.3) 40 A rating Each Excess(+) Full Conversion INR

30 (55.1.3) Triple pole MCB (With B/C curve trippingCharacteristics) Excess(+)

31 (55.1.3.2) 6 A to 32 A rating Each Excess(+) Full Conversion INR

32 (55.1.4) Four pole MCB (With B/C curve tripping Characteristics) Excess(+)

33 (55.1.2.2) 6 A to 32 A rating Each Excess(+) Full Conversion INR

34 (55.7) Providing & Fixing of din rail mounting contactor and accessories confirming to IEC 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Excess(+)

35 (55.7.1) Modular contactor 25A - 1NO Each Excess(+) Full Conversion INR

36 (55.7.2) Modular contactor 25A - 2NO Each Excess(+) Full Conversion INR

37 (55.7.3) Modular contactor 40A - 2NO Each Excess(+) Full Conversion INR

38 (53.1) Supply and laying PVC Insulated and PVC Round Sheathed Multi Core copper conductor (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Excess(+)

39 (53.10.1) 1.5 sq.mm x 3 core Rmtr. Excess(+) Full Conversion INR

40 (61.5) Supply, Fabricating & installing following sizes of perforated Hot dipped Galvanized iron cable tray ( Galvanized thickness not less then 50 microns) with perforation not more then 17.5% in convenient section including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with GI suspenders including GI bolts & nuts , fastners, supports etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Excess(+)

41 (61.5.1) 100mm x 50mm x 1.6mm Mtr Excess(+) Full Conversion INR

42 (61.5.2) 150mm x 50mm x 1.6mm Mtr Excess(+) Full Conversion INR

43 (61.5.4) 300mm x 50mm x 1.6mm Mtr Excess(+) Full Conversion INR

44 (60.2) Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Excess(+)

45 (60.2.2) 6.0 Sq. mm Excess(+)

46 (60.2.2.1) 2 core Mtr Excess(+) Full Conversion INR

47 (60.2.2.3) 4core Mtr Excess(+) Full Conversion INR

48 (60.2.3) 10.0 Sq. mm Excess(+)

49 (60.2.3.3) 4 core Mtr Excess(+) Full Conversion INR

50 (60.2.15.2) 400.0 Sq. mm 3.5 core Mtr Excess(+) Full Conversion INR

51 (61.13) P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outer dia. MFR Test report from NABL accrediated is to be submitted.(Excavation of Earth & Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Excess(+)

52 (61.13.1) 50 mm Mtr Excess(+) Full Conversion INR

53 (61.13.5) 110 mm Mtr Excess(+) Full Conversion INR

54 (61.13.3 ) 75 mm Mtr Excess(+) Full Conversion INR

55 (67.15) Providing & Fixing of IK10 IP65 / IP66 protected LED Up - Down Luminarie Wall / Surface mounting made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥ 90 Lumen/W. COB LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice. driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Excess(+)

56 (67.12.2) Minimum lumen output 1300 lm Each Excess(+) Full Conversion INR

57 (67.8) Providing and Laying RCC Foundation for Octagonal / Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . A) Excavation of Pit for Foundation Size upto required depth from Ground level B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete. C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness D) Reinforcement for R.C.C. work with TMT bars including straightening, cutting, bending, placing in position and binding all complete. E) Centring and shuttering including strutting , propping etc. and removal of form work for Footing and Pedestal F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations. G) Providing and Laying Reinforce cement Concrete of M-25 grade in Footing and Pedestal including Curing the foundation for 7 days. H) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face. Excess(+)

58 (67.8.1) Pole Foundation for Octagonal pole from 3 Mtr. To 6 Mtr. Each Excess(+) Full Conversion INR

59 (67.8.2) Pole Foundation for Octagonal pole from 7 Mtr. To 9 Mtr Each Excess(+) Full Conversion INR

60 (68.37) Labour charges for Dismantling of following existing street light electric poles with street light fixtures, underground cable, MS box and other electric items of the pole coming along the alignment of the road and removal and re- rolling MS poles/PCC poles of different sizes as well as handing over the same to DISCOM/UIT/MC store and as per the direction of Engineer Incharge and clean the site good as per the requirement and submit the receipt from concering authority, all complete works. Job Excess(+) Full Conversion INR

61 (63.1) Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in-charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Set Excess(+) Full Conversion INR

62 (63.9) P & F of Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Each Excess(+) Full Conversion INR

63 (63.6) Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Excess(+)

64 (63.6.7) 6 SWG G.I. ( Hot Dipped ) Wire Mtr. Excess(+) Full Conversion INR

65 (63.6.8) 8 SWG G.I. ( Hot Dipped ) Wire Mtr. Excess(+) Full Conversion INR

66 (63.6.9) 10 SWG G.I. ( Hot Dipped ) Wire Mtr. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: EXECUTIVE ENGINEER (KISHANPOLE ZONE)

Name of Work: Conservation and Development Works for Heritage Walled City Area and Monuments ( Facade Restoration & Illumination for Bazars & Gates of Jaipur Walled City Package -1).

Contract No: EXECUTIVE ENGINEER (KISHANPOLE ZONE)/2025-26/127

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

2 Providing and fixing in position Pink Sand Stone/ Kerb stone of size 230mmx300 mm and cut to shape as per with exposed face fine chiesel dresses fixing and jointing/pointing wit cement mortar 1:4 using pigment as per drawing and instruction of Enineer Incharge complete in all respect. 0.000 Meter Excess(+) Full Conversion INR

3 Repairing of existing historic window/doors, including damaged beading/moulding, rotten/deteriorated parts, removal of old paint, removing and refixing of door/window including providing and fixing new brass fittings & polish — complete in all respects. 0.999 Sqm Excess(+) Full Conversion INR

4 Providing and fixing in position Cast Iron grills or railings of any pattern shapes design including cutting and line welding of iron and necessary bolting with nut, bolts & fastener wherever required etc including all material complete. 0.000 Kg Excess(+) Full Conversion INR

5 Providing and fixing Glass fiber reinforced concrete screen/jali thickness 35-40 mm of approved pattern, design, thickness and colour. Jali made with 43 grade white cement, quartz silica sand, alkali resistant glass fiber, super plasticizer and polymer and UV resistant synthetic inorganic pigments etc. The screen/Jali shall be fixed by dry fixing with stainless steel 304 grade "L" shaped cramps, dash fasteners etc. complete. Rate shall included the structural Steel frame (Horizontal and Vertical member) support to hold the GRC Jalli at required building height to withstand wind pressure. The Technical specification of screen/jali shall be as under: Dry Density: > 1800 kg/cum Water Absorption: Less than 6% of dry weight by immersion over a period of 24 hours. Compressive Strength: > 400 Kg./CM2 (M-40 Grade) Wet Transverse Strength: > 7N /mm Abrasion Resistance: Less than 2.0 for E.H.D. Thermal Conductivity : 1.63 W/MK at 3% moisture content 1.80 W/MK at 5% moisture content 1200mm x 600mm GRC Circular Band (Structural steel frame paid separately) 0.000 Sqm Excess(+) Full Conversion INR

6 Providing and fixing shop signage using 25–30 mm thick sandstone (as per approved sample), including cutting to size aprox. 250x150mm, edge finishing, engraving or carving of shop number (as per approved font/style), polishing, and securely fixing with screws/adhesives including scaffolding, tools, and all complete as per instructions of Engineer-in-Charge. 0.000 Nos Excess(+) Full Conversion INR

7 Providing and fixing sand stone bench of size 1900x 450mm and 650mm high. The bench to be made using 100mm thick red/white sand stone slabs with carving and 2 No's carved supports size of 200x450x650mm of approved type using relevant fixing details as required or as directed by the Architect Item to include necessary fixing details fixing of bench on floor if required cleaning and hand polishing of sand stone surfaces etc. complete. 0.000 Nos Excess(+) Full Conversion INR

8 Supply, fabrication, and installation of tensile structure awning shade in front of shops, using M.S. or Aluminium pipes of 40–50 mm OD and 3–4 mm thickness for base frame with necessary fasteners. The frame shall be finished with approved colour powder coating. Provide approved tensile fabric of 750 GSM (PVDF or greater), 100% waterproof, fungus-resistant, with approved traditional printed design. Include aluminium pipe structure finish and gear-operated opening/closing system. Complete as per approved drawings, design, and direction of Engineer-in-Charge. Provide 10-year warranty for fabric and 2-year comprehensive warranty for complete product. The work shall include all materials, labour, scaffolding, fixing, painting, and other works required for a fully functional and durable installation. 0.000 Sqm Excess(+) Full Conversion INR

9 Supply, fabrication and installation of Tensile Structure Awning Shade in shops using M.S. pipe of 75–100 mm OD and 3–4 mm thickness for base frame with necessary fasteners, including cutting, welding, grinding and proper bracing for stability, finished with two coats of anti-rust primer and approved colour powder coating of minimum 60–80 micron thickness. The structure shall be covered with approved colour architectural fabric of minimum 750 GSM (PVDF coated) or higher, 100% waterproof, UV resistant, fungus free, tear resistant and with traditional printed finish, with all fabric joints high-frequency welded/heat sealed to ensure leakproof performance. The work shall be complete as per approved drawing, design and direction of Engineer-in-Charge, and shall include all materials, labour, scaffolding, fixing, painting, tools and all incidental works required for a fully functional and durable installation. The agency shall provide 10-year warranty for fabric and 2-year comprehensive warranty for the complete product including structure, painting and installation. 0.000 Sqm Excess(+) Full Conversion INR

10 Providing and fixing of 3–4 mm thick Corten Steel Jali of approved make, cut to approved design and pattern through CNC/Laser cutting, including preparation, fabrication, transportation and installation in position with necessary hardware, framework and supports as per manufacturer’s specifications and site conditions. The Corten steel shall be provided with necessary finish and protective treatment to ensure abrasion resistance and durability, complete as per drawing, design and direction of Engineer-in-Charge/Consultant, including all materials, labour, tools, plants and incidental works required for a proper and stable installation 0.000 Sqm Excess(+) Full Conversion INR

11 Removing & re-fixing of stone slab flooring set in pattern over 20 mm thick base of lime surkhi mortar 1:2 including jointing finished flush with lime putty and stone powder with an admixture of pigment complete in all respect. 0.000 Sqm Excess(+) Full Conversion INR

12 Providing and fixing 50 to 75 mm thick stone chajja in lime sand mortar 1:2 including making gola at junction with wall in lime concrete, 40% lime mortar & 20mm nominal size graded aggregates, drip course etc. complete including 20mm thick plastering in Lime Surkhi Mortar 1:2 (1 Lime Putty : 2 Surkhi) on both faces, racking of joints, curing etc. complete 0.000 Sqm Excess(+) Full Conversion INR

13 Removal and refixing of stone chajja 50 to 75mm thick, stone used to be similar to the existing ones at the site, cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respects in lime surkhi mortar (1 lime putty : 2 surkhi). 0.000 Sqm Excess(+) Full Conversion INR

14 Removing of existing signboards including supporting frame, electrical wiring, connections, and all associated materials; complete in all respects as directed by the Engineer-in-Charge 0.000 Sqm Excess(+) Full Conversion INR

15 Brick work with FPS brick of class designation 75 in super structure and above plinth level up to floor V level with bricks : Lime surkhi mortar 1:2 (1 lime: 2 Surkhi) 0.999 Cum Excess(+) Full Conversion INR

16 Half brick masonry in Super Structure using bricks of designation 75 in Lime surkhi mortar 1:2 (1 lime: 2 Surkhi) 0.000 Sqm Excess(+) Full Conversion INR

17 Add extra over item of stone masonry in super structure for square and rectangular pillars in lime surkhi mortar 0.000 Cum Excess(+) Full Conversion INR

18 Cleaning of brass kalash with suitable chemical and brasso coplete as directed by engineer incharge. 0.000 Each Excess(+) Full Conversion INR

19 Painting on Parkota Ornamental Lining Work including base coat of traditional Khameera, followed by stone colour paint (in approved shade), as per traditional Rajasthani/limewash practices. Work includes all materials, labour, tools, and scaffolding. Only minimum rectangular area shall be measured for payment. 0.000 Sqm Excess(+) Full Conversion INR

20 Providing and fixing stone dustbin of traditional design made of Pink sandstone, overall size 600x600x750 mm, using 40 mm thick sandstone panels with carved floral motif as per approved design, fixed on four sandstone pillars of size 75x75 mm and 950 mm height, with 200 mm of the pillar height embedded in ground, including stainless steel container wire gauge 14 mesh x 24 gauge of size 400 x400 mm and 580 mm height, fitted inside with pivot arrangement, complete with necessary earthwork excavation, refilling, cement concrete foundation, curing, finishing and making good, all complete as per approved drawing, design and direction of Engineer-in-Charge. 0.000 Each Excess(+) Full Conversion INR

21 Providing, carving and Fixing of interpretive signages made out of Bansi paharpur white stone of size 1000x1300x75 mm plane with outer border carving .Engraving of letters & Painting with black enamel paint & size of latter complete as per drawing and design. The signage stone shall be fixed on the post of same stone Pillar of size 300x450 x 1200 above ground and 1/4 of total height of post shall be embedded in ground with necessary earthwork and concreting etc. Complete as per details and drawings and as directed by engineer incharge. 0.000 Each Excess(+) Full Conversion INR

22 Providing & Fixing of interpretive /directional signages made out of red/ pink sand stone of trapezoidal shape having back height 600 mm & front height 280 mm & width on top 50 mm & bottom 300 mm etc.Engraving of letters & painting with black enamel paint & size of letters complete as per details and drawings and as directed by engineer incharge. 0.000 Each Excess(+) Full Conversion INR

23 Supply, printing, and installation of 4 mm thick Aluminum Composite Panel (ACP) cladding with direct UV printing, comprising two 0.50 mm thick aluminum skins (front & rear) bonded to FR (fire-retardant) mineral core, finished with PVDF/FEVE coating suitable for outdoor use. Panels shall be printed using high-resolution UV flatbed digital printing (minimum 600-1200 dpi) with UV-curable, fade-proof, scratch-resistant inks, weather resistance and long-term durability. Printed surface shall be finished with UV-protective clear coat / anti-graffiti coating to provide a minimum of 10 years warranty. Panels shall be fixed over a sub-frame of extruded aluminum alloy , minimum 2–2.5 mm thick, anodized or powder-coated, designed to withstand wind loads and thermal movement. Fixing shall be done with stainless steel screws, rivets, and anchor bolts with provision for thermal expansion. All edges and grooves shall be CNC routed and bent as per shop drawings, ensuring smooth, uniform joints of 8–12 mm, sealed with UV-resistant silicone sealant (Dow Corning/Wacker or equivalent) with EPDM backer rods where required. The item shall include ACP panels, direct printing, UV-protective coating, aluminum sub-frame, fasteners, sealants, scaffolding, fabrication, transportation, and installation complete in all respects as per approved design and engineer’s 0.000 Sqm Excess(+) Full Conversion INR

24 (ELECTRICAL WORK)

25 SITC of Linear Fixtures having 9W LED compact and minimilist linear surface mounted designed for wall, Ceiling & floor mount. it should have a beam angle of 12°. The luminaire should be made of extruded aluminium alloy (grade 6063) of high corrosion resistance and non corrosive A2 stainless steel fasteners also must have stainless steel mounting bracket with an adjustable feature from 0°-45° to facilitate proper aiming of the luminaire at desired angle, with clear toughened glass. connection must have IP67 male and female connectors, IP65 Protection class. Colour rendering index of (CRI)>80, SDCM≤ 3 MacAdam,LED module with expected service life of at least 54,000 operating hours with integral constant voltage power supply at 24Vdc. luminaire dimension : 300mm length x 38mm width x 85mm height. CE & BIS Certified. Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects. Make :- K-Lite/ ligman/ abby/ Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

26 SITC of Linear Fixtures having 18W LED compact and minimilist linear surface mounted designed for wall, Ceiling & floor mount. it should have a beam angle of 12°. The luminaire should be made of extruded aluminium alloy (grade 6063) of high corrosion resistance and non corrosive A2 stainless steel fasteners also must have stainless steel mounting bracket with an adjustable feature from 0°-45° to facilitate proper aiming of the luminaire at desired angle, with clear toughened glass. connection must have IP67 male and female connectors, IP65 Protection class. Colour rendering index of (CRI)>80, SDCM≤ 3 MacAdam,LED module with expected service life of at least 54,000 operating hours with integral constant voltage power supply at 24Vdc. luminaire dimension : 500mm length x 38mm width x 85mm height. CE & BIS Certified. Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects. Make :- K-Lite/ ligman/Abby/Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

27 SITC of Linear Fixtures having 24W LED compact and minimilist linear surface mounted designed for wall, Ceiling & floor mount. it should have a beam angle of 12°. The luminaire should be made of extruded aluminium alloy (grade 6063) of high corrosion resistance and non corrosive A2 stainless steel fasteners also must have stainless steel mounting bracket with an adjustable feature from 0°-45° to facilitate proper aiming of the luminaire at desired angle, with clear toughened glass. connection must have IP67 male and female connectors, IP65 Protection class. Colour rendering index of (CRI)>80, SDCM≤ 3 MacAdam,LED module with expected service life of at least 54,000 operating hours with integral constant voltage power supply at 24Vdc. luminaire dimension : 1000mm length x 38mm width x 85mm height. CE & BIS Certified. Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects. Make :- K-Lite/ ligman/ kesslec/ Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

28 SITC of IP65 , IK08 12W surface wall mounted light designed to provide security lighting . Having Beam Angle 120 degree . Luminarie should made up of die cast aluminium with non corrosive SS fasteners.Non yellowing UV stabilized translucent polycarbonate diffuser for glare free,uniform light distribution. Pure polyester powder coated . Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. CE & BIS certified . Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects. Make : K-lite/ligman/philips/Havells / Surya or equivalent. 0.000 Nos Excess(+) Full Conversion INR

29 SITC of BIS approved 24V DC IP67 flexible copper base linear LED strip having step measurement = 50mm, solderless joints throughout the length and IC. Should have CRI 90 or higher, R9 50 or higher. Single Bin 3 Step McAdam LEDs. Lifetime of 60,000 hrs at L80/B10 factors. 7 Watts per meter with source lumen of 700 lm / mtr , side bend . Complete with power supply with output voltage tolerance of maximum 4% and accessories. Installation of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with IP68 gel based water proof connector. Shop floor drawings and products to be approved by Architects. Make: Led-Linear / iGuzzini / IBL or equivalent. 0.000 RMtr Excess(+) Full Conversion INR

30 SITC of 24V IP67 10W/mtr 16.5 x 16.5 mm compact and minimilist surface mounted LED Strip designed for ceiling / wall mount. Should have Beam angle 120°. Luminaire should made of Copper Coated Flexible Strip, Silicone moulded diffuser. Protection class IP67. Available colour temperature 2700K-6000K, Colour rendering index (CRI)>80. SDCM = 3 MacAdam. LED module with expected service life of at least 10,000 operating hours. Constant voltage power supply at 24Vdc assures safety. Cut length 83.3mm. Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects . The lengths have to be factory made complete with water ingress protection and male female connectors IP rated . Make: K-Lite/ Ligman / philips/Surya or equivalent. 0.000 RMtr Excess(+) Full Conversion INR

31 SITC of MINILED 5W,beam angle 8 degree, compact IP67 , IK08 LED fittings suitable for down light, Wall recessed and walkover for both indoor & outdoor applications with dimension 39mm x 48 mm flush mounting installation. It should be equipped with a screwless round front ring in STAINLESS STEEL . The body of the lumaniare should be screwless from front ring and shall be made from solid billet of 316 grade stainless steel, ensuring IP67 ring silicone seal gasket, with toughened clear glass diffuser 4mm thickness, clear polycarbonate optical lens. Luminaire must be hard wired with 2 x 0.5mm 2 cable of 0.5 metre length shall be supplied with mounting sleeve for preparing recessed opening in ground or wall. Having wattage of 5W . CE & BIS Approx Dimenssion Ø39 x 67mm . Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate.Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects . Make :- K-Lite/ligman / Kesslec/Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

32 SITC of Decorative wall bracket with luminarie designed for pathway lighting suitable for wall mount .Bracket arm length approximately 385mm and height should be approximately 340mm. Decorative bracket should be made of die-cast aluminium. Bracket mounted on the wall using anchor fasteners. Mounting outer dia should be 50.8 . The bracket should be coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). Luminaire should have wattage of 30W . CE & BIS Certified.Manufacturer should have an inhouse NABL certified lab and complete manufacturing facility of the product with a MSME certificate. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be installed with water proof connector . Shop floor drawings and products to be approved by Architects . Make :- K-lite / kesslec / Ligman /Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

33 SITC of IP65 , IK05 LED luminarie with 6000mm pole decorative double arm pole . Luminarie body made up of Spun aluminium top cover & Die cast aluminium base with clear acrylic diffuser . All pole sections should be welded using special v groove technique by certified welders using high end MIG welding processes.Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door contoured to the shape of the pole with silicone rubber gasket. The control gear tray should be prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate should be designed to be elongated for fine adjustments / alignment of the pole during installation.Base plate should be made of steel grade E250 & foundation bolt of grade 4.6 . Lumianrie should have wattage of 80W (80W*2=160W) . CE & BIS Certified. Inhouse NABL certification. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects Height of Pole including luminarie - 6000mm Make :- K-lite / kesslec / Ligman/ Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

34 SITC of IP65 , IK05 LED luminarie with 4000mm pole decorative double arm pole bracket . Luminarie body made up of Spun aluminium top cover & Die cast aluminium base with clear acrylic diffuser . All pole sections should be welded using special v groove technique by certified welders using high end MIG welding processes.Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door contoured to the shape of the pole with silicone rubber gasket. The control gear tray should be prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate should be designed to be elongated for fine adjustments / alignment of the pole during installation.Base plate should be made of steel grade E250 & foundation bolt of grade 4.6 . Lumianrie should have wattage of 50W (50W*2 =100W) . CE & BIS Certified. Inhouse NABL certification. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects Height of Pole including luminarie Make :- K-lite / Ligman / kesslec/ Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

35 SITC of IP65 , IK05 LED luminarie 50W with 4000mm post top pole . Luminarie body made up of Spun aluminium top cover& Die cast aluminium base with clear acrylic diffuser . All pole sections should be welded using special v groove technique by certified welders using high end MIG welding processes.Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door contoured to the shape of the pole with silicone rubber gasket. The control gear tray should be prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate should be designed to be elongated for fine adjustments / alignment of the pole during installation.Base plate should be made of steel grade E250 & foundation bolt of grade 4.6 . Lumianrie should have wattage of 50W . CE & BIS Certified. Inhouse NABL certification. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects Height of Pole including luminarie - 4000mm Make :- K-lite / Ligman / kesslec /Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

36 SITC of IP66 30W compact and robust flood light luminaires designed to provide uniform illumination in open spaces.Should have Beam angle 15° / 25° / 40°. Luminaire should be made of pressure die cast aluminium of high corrosion resistance and non corrosive stainless steel fasteners. Clear tempered glass. Bracket to facilitate proper aiming of the luminaire at desired angle. Protection class IP66. Mechanical resistance IK05. Pure polyester powder coated RAL 9005 Jet black. Available colour temperature 3000K (Other CCT’s On Request) , Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 50,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Surge protection 3KV. Approx Luminaire dimension : 170mm diameter x 218mm height. CE & BIS Certified. Inhouse NABL certification. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects . Make - K-lite / Ligman / Abby/ Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

37 SITC of IP65 , IK05 LED luminarie with 9000mm pole decorative triple arm pole . Luminarie body made up of Spun aluminium top cover & Die cast aluminium base with clear acrylic diffuser . All pole sections should be welded using special v groove technique by certified welders using high end MIG welding processes.Built-in control box with cast aluminium service door and safety rope. Die cast aluminium door contoured to the shape of the pole with silicone rubber gasket. The control gear tray should be prewired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate should be designed to be elongated for fine adjustments / alignment of the pole during installation.Base plate should be made of steel grade E250 & foundation bolt of grade 4.6 . Lumianrie should have wattage of 80W (80*3=240W) . CE & BIS Certified. Inhouse NABL certification. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects Height of Pole including luminarie - 9000mm Make :- K-lite /Ligman / Kesslec /Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

38 SITC of 3W spike / surface mounted compact spot light designed to provide directional light. Having Beam angle 8° / 12° / 24° / 40° / 60° / 40°x11°. Luminaire should be made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass of 4mm thickness. Surface mounting spike made of polypropylene black. Hybrid optical lens for higher efficiency, lower optical losses with optimum glare suppression. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K/ 5000K. Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Approx Luminaire dimension : 93 x 64 x 83mm(without spike ). CE & BIS Certified .Inhouse NABL Certified laboratory. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects . Make :- Abby/ K-lite / ligman /Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

39 SITC of 6W spike / surface mounted compact spot light designed to provide directional light. Having Beam angle 15° / 25° / 40° . Luminaire should be made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass of 4mm thickness. Surface mounting spike made of polypropylene black. Hybrid optical lens for higher efficiency, lower optical losses with optimum glare suppression. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, 5000K. Colour rendering index (CRI)>80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Approx Luminaire dimension : 101 x 64 x 93mm (Wihtout Spike ). CE & BIS Certified .Inhouse NABL Certified laboratory. Instalaltion of fixtures has to be done as per architect design theme and recommendation .Fixture should be made vandal proof and should be installed with water proof connector . Shop floor drawings and products to be approved by Architects . Make : Abby/ K-lite/ ligman /Havells / Surya/Phillips or equivalent. 0.000 Nos Excess(+) Full Conversion INR

40 SITC of installed sound reinforcement loudspeaker, The speaker shall be a full-range environmental loudspeaker suitable for outdoor applications, providing high vocal clarity and extended durability. It shall have a frequency response of 73 Hz to 15 kHz (-3 dB) and a frequency range of 65 Hz to 16 kHz (-10 dB). The nominal impedance shall be 8Ω, with a power handling capacity of 150 W continuous and 600 W peak. The speaker shall have a sensitivity of 91 dB SPL at 1W/1m and a maximum sound pressure level of 113 dB SPL continuous and 119 dB SPL peak. The coverage pattern shall provide uniform sound dispersion, making it suitable for various commercial and public address applications. The loudspeaker shall incorporate four full-range 4.5-inch drivers, engineered without a crossover to ensure phase coherence and improved vocal intelligibility. The enclosure shall be designed for environmental resistance, ensuring reliable performance in diverse conditions. This Speaker should be installed with A custom transformer of 80W Tap .Approved Brand :-Amline / BOSE / d&b audiotechnik or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

41 Suppy and fabrication of custom-designed pole mount bracket for speaker, fabricated from high-grade stainless steel (SS 304/316), suitable for outdoor installation as per site conditions. Bracket shall be corrosion-resistant, weatherproof, and engineered for structural stability to support the weight and orientation of the designated speaker. Bracket design and fabrication to comply with specifications and approved drawings. Including transportation, installation on pole/structure, hardware, fasteners, tools, safety gear complete in all respect 0.000 Nos. Excess(+) Full Conversion INR

42 SITC of 4 channel power amplifier with total of 4800W power and power sharing feature for Asymmetric power allocation. Shall support Dante Digital as well as Analog line level audio inputs and GPIO connections for muting. Power output: Upto 4x1200W @ 4 and 8 ohms, upto 4x1500W @ 2ohms, SNR: 110dB(A) or better, THD+N: <0.1 %, Crosstalk (1 kHz): -70dB or better, A/D and D/A converters: 24-bit, 48 kHz Sample rate converter: 24-bit, 44.1 kHz – 192 kHz, Input-to-output signal routing: 4 × 4 matrix.Approved Brand :-Amline / BOSE / d&b audiotechnik or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

43 SITC of Weather proof network rack Conforms to IP55 Outdoor Standards Adjustable 17"Rack with Width 600 mm & Depth 800 mm equipment mounting verticals provide the better mounting flexibility maximizing the usable mounting space Depth adjustable mounting slots Precision engineering capabilities and best efficient software configuration product technology provides the best product quality and fastest delivery in the industry Top Panel with ventilation and cable entry from the Bottom Cooling fans mounted on Front Door with Hood cover 0.000 Nos. Excess(+) Full Conversion INR

44 SITC of 8 Port POE+ Managed Gigabit Switch with Minimum 65 Watts Power Budget & 100/1000X Fiber SFP Ports , 8 x 1000BASE-T PoE+ Copper ports Approved makes: cisco/Netgear/ Dlink or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

45 SITC of Integrated Digital Sound Processor with following functionalities and specifications;Signal Processor shall be CPU-32-bit fixed/floating-point DSP + ARM, 456 MHz.The DSP shall have 8 Mic/Line inputs & 8 analog outputs, 8 Additonal digital Outputs; 24 Bit A-D and D-A Convertors; Sampling Rate : 48 kHz; THD : < 0.002 % ; Channel Separation (Crosstalk) : < 105 dB ; Frequency Response 20 Hz - 20 kHz ; Dynamic Range : > 115 dB; 5 Control Inputs and Outputs; RS-232 and Ethernet Port for third party Control and Monitoring; inbuilt DSP features like automatic mic mixing, multiband graphic and parametric EQs, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors, and delays. etc. Shall Support at least 15 remote Zone controllers.Approved makes: Bose / L Acoustic / d&b audiotechnik or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

46 SITC of professional multisource CD/USB/SD-card music player with unbalanced outputs 2 x RCA + COMBI RCA, integrated FM RDS and tuner with RS232 control, IR remote included, rack mountable.Approved Makes: Biamp /Symetrix /Bose or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

47 Supply of Dante AV io Adupter :-Max signal level (balanced)*+24dBu / +4dBu / 0dBu +18dBu / +4dBu / 0dBu Frequency Response 20Hz to 20kHz (-/+0.5dB) Impedance 20k Ohm balanced,10k Ohm unbalanced,Dynamic Range > 100dB > Signal to Noise Ratio > 100dB,Total Harmonic Distortion < 0.01% at +4dBu Connectors RJ45 & 1 XLR-F Power Class 1 802.3af PoE Sample Rates 44.1, 48, 96 kHz Bit Depth 24 Dante Device Latency 1, 2, or 5ms (configurable using Dante Controller) Network Transport Dante Audio over IP, AES67 RTP Part Number ADP-DAI-AU-1X0 .make- Audinate, Alfatron/getdante or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

48 Supply of 4 core 12 AWG/6 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant.Approved Brand :-Liberty/krystals/beldan or equivalent. 0.000 MTR Excess(+) Full Conversion INR

49 Supply of 1G SFP LC LX 10km SMF XCVR connector Type: LC IEEE Standard: IEEE 802.3ah Wavelength (nm): 1310 Fiber Type: Single Mode make Daksh/Digisol/Dlink or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

50 Supply of Dynamic table microphone in Ergonomic enclosure with lockable talk button,Type: Moving coil microphone,Polar Pattern: Unidirectional,Impedance: 600 Ω, unbalanced,Sensitivity: 58 dB (1 kHz, 0 dB=1 V/Pa),Frequency Response: 100 Hz - 10 kHz,Output: 2-conductor shielded cable (2.5 m (8.2 ft) with phone plugTalk Switch: Push-to-talk switch, with locking lever,Operating Temperature -10 °C to +50 °C Make-Shure/Adonis/BXB/Dasscom or equivalent. 0.000 Nos. Excess(+) Full Conversion INR

51 Outdoor LED Display –Supply OF Outdoor LED Display – Outdoor LED Display –Display Size (W x H) 8.64X 1.92 Mts LED Display of meter Pixel Pitch 4 mm , LED Configuration RGB 3 in 1 SMD ,LED Lamp -SMD LED lamp ,Pixel Density Minimum 62500 pixels per sqm or higher Half Gain Horizontal / Vertical Viewing Angle H 140 deg / V 90 deg or better ,Refresh Rate >1920 Hz or betterTemp Range -20 to +50 Degrees C or better Grey Scale Processing 14 Bit or betterColours 4.4 Trillion colours Brightness 5000 cd/m² or better Maximum Power Consumption 900 w/sqm or lower Dimming Capability 255 levels Power Input 100 ~ 240 VAC Contrast Ratio 5000:1 or better Access For Maintenance Front IP Level Front : IP65 , Rear : IP 54 LED Tile/ Cabinet Calibration LED tiles/cabinets should be calibrated before being supplied. These screens should also be calibrated after the installation to ensure brightness uniformity. Calibration should also be performed as and when it is required during the warranty period. Offered product which does not support dot calibration shall be rejected Brightness measurement tool Emitted brightness measurement tool namely a luminance meter (which can provide direct brightness reading in cd/m²) for brightness measurement of offered LED screen. OEM of LED Display should provide details (Model No. & Date of Purchase) of the luminance meter available with them in India along with its latest calibration certificate. The same instrument shall be used to check the minimum brightness levels as offered in the bid. Please note- Illuminance meters are not acceptable as they are not for measuring emitted light International Safety Certifications( Mandatory to submit along with the bid) BIS Registration (Bureau Of Indian Standards) As per Standard: IS 13252 ( PART 1) :2010. Offered model BIS certificate should be on OEM brand and their own manufacturing unit in India. 0.000 Nos. Excess(+) Full Conversion INR

52 Valid BIS certificate to be provided for the offered LED tiles/cabinets. BIS certificate for led module only shall not be considered as valid BIS certificate for the product. The offered model should be clearly mentioned in the BIS certificate. This certificate shall be submitted at the time of bid. Quality/Health & Safety/Environmental Certifications of OEM/OEM subsidiary in India ( Copy to be submitted along with the bid Quality Management System 9001:2015 , Occupation health & Safety Management System - OHSAS 18001:2007 Environmental Management System 14001: 2015 , all the Solution from same OEM to Avoid any integrity issue LED Cabinet, Controller, PDU, Make/ Brand: Barco/Daktronics/Delta /Mitsubishi /NEC or equivalent. Power Distribution Unit Front Door 2 Hinges with Rack Wall Mount Clamp Welded on Rack frame rear side 19" pillar front & 19" pillar rear Bolted on rack side wall Locking Arrangement To be provided with a locking system Limit Switch The rack door to be provided with a limit switch Earthing, Earthing studs should be provided in the rack for Earthing purposes Cable points Cable entry and exit points should be provided in the rack Mounting Should be possible to mount the rack either on a pole or on a wall with options of different mounting types Material GI 120 gsm thickness 1.5 mm IP rating IP54 AC input 380V/220V AC Power Load Max As per LED power requirement Surge protection Class C Over temperature protection Selectable from 30 deg. to 50 deg.. Approved Brand Barco/Daktronics/Delta /Mitsubishi /NEC or equivalent.

53 LED Control System Control Port RS232/USB/ LAN Signal Interface 1x HDMI / 1x DP1.2 Connectivity to Display RJ45 Minimum Load Capacity Should be able to support the offered LED screen Make / Brand Barco/Daktronics/Delta /Mitsubishi /NEC or equivalent. Multi Media & Content Management System -API Signage solution should provide an open software API RS 232 interface For controlling other equipment Power Consumption < 15 W Power Over Ethernet POE should be supported by the device for redundancy purposes Power Supply 100~240 V AC Network Connectivity WiFi: 802.11 AC (2.4 GHz & 5 GHz) & Ethernet : 1 GBps Storage Minimum internal storage 16 GB Output Ports 1 x HDMI, 1 x Audio Output, Input Ports 1 x HDMI, 1 x Line Input, 1 x USB 2.0 ( Type A), micro SD card slot, RJ45 with POE, RS 232, 1 x USB 2.0 ( Type C) Minimum Media Formats Supported Images: JPEG, PNG, BMP: Video: MP2, MP4, 3GP, AVI, MOV, WMV: Audio : MP3, WMV, AAC Output Orientation Landscape or Portrait Display Resolutions Should support up to 4K-UHD Cloud Service For remote device and content management over the internet Security Kensington security slot to be present in the device, Dual network WiFi & LAN Plug and Play For east setup and auto device discovery Screen Mirroring Should support screen mirroring for iOS and Android,NT live sender and receiver for wireless mirroring Content Support Webpages, twitter, RSS, Google Calendar, Weather as a minimum Security AES-256 encryption Enhanced hardware capability AirPlay: Discovery over Bluetooth, 5GHz WiFi hotspot WiFi 802.11ac, b/g/n, 2.4GHz & 5GHz, 2T2R with 2 external antenna Dual WiFi modules BYOD Supported Windows, MAC, Ubuntu 18.04 & above, iOS 11 & above, Android 5.0 & above Annotation Should be supported Signage & Content Manager (Software & Hardware) To be able to create playlists and send them over the network to media players or more for playout based on schedule and sequencing.

54 This software to be loaded on suitable USB/hardware and to be supplied by the vendor,Playlist Automation Flexible scheduling based on day, date and time; Playlist Scheduling; Content Distribution Should be done using OEM cloud setup. Cloud licence should be provided for five years minimum Content Management Synchronize media content automatically from remote storage -Dropbox, FTP, etc. Solution Compatibility Complete solution ( LED display , LED control system , Multimedia & Content Management system )should be from same OEM/ Brand to avoid the compatibility issue at the later stage Approved Make Barco/ Delta / Mitsubishi /Daktronics/NEC or equivalent. Mechanical Structure For Mounting Of LED Wall Mounting Structure LED wall should be mounted on building façade /customized structure. Structure should be earthed properly and provided.Material Should be made from mild steel and painted black along with antirust coating.Auto Brightness Sensor Rated voltage 5V ,Operating temperature -30℃~70℃ ,Operating humidity 0~99% ,Brightness range 0~65535 lux ,Cable 5m ,Features • Monitor the ambient brightness to achieve automatic brightness adjustment of LED display • Asynchronous • Outdoor use proofing • No external power supply required Scope for Installation- Complete Supply, Installation, Configuration, Testing and Commissioning of all the delivered equipment with necessary cables and accessories

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information