Aluminium Partation of building for BDC office at pyt Chakroi Lower , PYT. CHAKROI LOWER , BLOCK SUCHETGARH

Amount

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).35mm Second class deodar wood

Distempering with oil bound washable distemper of approved manufacture (two or more coats) and of required shade and colour on new work.Including primer coat of cement primer

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 5.5mm thick ACP sheet thermoplastic core in Eva Bond panel is low density polyethylene (LDPE), in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing stainless steel curtain rods of wall thickness 1.25 mm with two steel brackets fixed with steel screws and wooden plugs etc wherever necessary complete. 25 mm diameter.

Providing and fixing cutains pieces in curtain rods of size (4feet x 7 feet ) incluing all connecting accessories of good quality fabric as per direction of engineer - incharge .complete job

M/s Harvinder Singh Contractor

RINKU KUMAR