RE-CONSTRUCTION OF PERIMETER WALL ALONGWITH DRAIN AT 41 WEU AF STN PATHANKOT

Amount

Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n exc 10 Sqm on plan, n exc 1.5 m deep and nexc 1.5 m wide , getting out in hard/ Densed soil complete all as specified and directed by Engineer-in-Charge.

Earth work in excavation of any type of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed by Engineer-in-Charge.

Add to item No. 03 Above for each additional 1.5 m or part thereof in depth beyond the first 1.5 m complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:4:8,type D-2 (using 40mm graded crushed stone aggregate) as in sub base and mass concrete complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engineer-in-Charge.

Form work to sides of sides of pillars columns of square or rectangular finished rough complete all as specified and directed by Engineer-in-Charge.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with flat rough finished surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for reinforced Design Mix cement concrete M-25 (20 mm graded crushed stone aggregate) as in foundation ,including footings ,foundations beams, plinth beams, bases for columns complete all as specified and directed by Engineer-in-Charge.

Material and labour for reinforced Design Mix cement concrete M-25 (20 mm graded crushed stone aggregate) as in as in columns, pillars complete all as specified and directed by Engineer-in-Charge.

Material and labour for reinforced Design Mix cement concrete M-25 (1:2:4) type B1 (20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.

Material and labour for reinforced Design Mix cement concrete M-25 (1:2:4) (20mm graded crushed stone aggregate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed by Engineer-in-Charge.

Material and labour for mild steel TMT bars Fe-410-W(Gde.E-250) quality-A 10mm dia and over cut to length bent to shape as reqd , incl crancking bending ,spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Material and labour for mild steel TMT bars 5mm dia and over upto incl 10mm cut to length bent to shape as reqd ,as in stirrups and spacers complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finishing the surface fair and even complete all as specified and directed by Engineer-in-Charge.

Material and labour fFinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild steel works with angle iron, flat iron etc as in posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.40X40X6 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Galvanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spacing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with and provision of galvamised mild steel wire stapled or steel pins etc as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing of new steel and iron surfaces of any description n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thickness complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC 1:2:4 nominal mix type B-1 (Using 20 mm graded crushed stone aggregate) as in PCC apron bed at nallah portion complete all as specified and directed by Engineer-in-Charge.

Material and labour Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc10cm long complete all as specified and directed by Engineer-in-Charge.

Material and labour Providing Benching in PCC 1:2:4 type B (using 12.5 graded crushed stone aggregate) as in benching at the bottom of the wall complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Concertina Coil 600 mm dia with 50 loops 45 mm strip 2.5 mm wire blade length 22 mm and distance of about 35 mm ISI heavy coated 250 GSM zinc on wire TS 165 kg/mm2 over barbed wire of wall fencing complete all as specified and directed. One coil weights 12 Kg and length 5 to 6 Rm (considering 6 Rm per coil) complete all as specified and directed by Engineer-in-Charge.

Providing pre cast cement concrete in landing cover slab for manholes 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finished even smooth complete all as specified and directed by Engineer-in-Charge.

Spreading & levelling the excavated material to the sides of wall including watering and well ramming in layers n exc 25cm thickness, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC pipe 110mm bore for wheep holes of any length complete all as specified and directed by Engineer-in-Charge.

Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screw as specified type 410 SP-22 (9 meters long) complete all as specified and directed by Engr-In-Charge.

Supply and fixing poly carbon junction boxes with two no. Bus bar of 25 amp capacity alongwith MCB SP 'C' type 6 amp complete with lugs and fixing of cable complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 16 sq mm, 2 core including cable lugs, jointing materials GI pipe etc., laid in trenches fixed on poles or laid through GI pipes complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED street light fitting 70 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to the underground electric cable complete all as specified considering 19.75 of SSR part-I complete all as specified and directed by Engineer-in-Charge.

Material and labour Sub Class 'B' brick covering protection to the electri cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed by Engineer-in-Charge.

Surya & Gautam Builders (BID ID -3189248)

JAGDISH SINGH ASSOCIATES (BID ID -3193030)

M/S SINGHAL ENGINEERS (BID ID -3192507)

LAKSHMI BUILDING INOVATORS (BID ID -3193475)

SUBASH MAHAJAN (BID ID -3193288)