Improvement of 04 Nos bath cum toilet in Officer mess suits at STC BSF Kharkan Camp

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.30 mm thick plain PVC door shutters

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) 670x365x740 mm , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. S1013163VS)

Providing and fixing wash basin 630x450x205 mm with C.I. brackets, and Pedestal , including painting of fittings and brackets, cutting and making good the walls wherever require as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. S2040112 & Cat no. S2090107)

Providing and fixing CP Brass Single lever telephonic wall mixer , of quality & make as approved by Engineer in charge. 15 mm nominal dia as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F1005424 )

Providing and fixing toilet paper holder with flap guard as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F5002110 )

Providing and fixing liquid soap dispenser as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F5002111 )

Providing and fixing towel ring trapezoidal shape with concealed fittings arrangement of approved quality and colour, as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F5002105 )

Providing and fixing long nose bib cock as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F1005152 )

Providing and fixing concealed stop cock as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F4050503 )

Providing and fixing Angle cock as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F1005201 )

Providing and fixing Soap dish holder as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F5002106 )

Providing and fixing connection pipe 45 cm length make as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F8070301 )

Providing and fixing Hand Shower with 1.5 mtr flexible stainless steel hose as per direction of Engineer-in-charge. (Paryag/Hindware/Jaguar/Cera Cat no. F7030101AB & Cat no. F8070401 )

rate correction factor 0.973 on DSR items 01 to 15

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. (Group-A)

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3x1.5 Sqmm

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3x4 Sqmm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A Switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

Supplying and fixing 3 pin 5 amps Ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Providing and fixing of 20 watt LED Batten tubelight,including connections,testing and dismantling the existing complete etc as required.

Providing and fixing of 18 watt LED surface ceiling downlighter including connections,testing and dismantling the existing fittings complete etc as required

Providing and fixing of Plastic exhaust fan of sweep 250mm,1200rpm single phase including connections,testing and dismantling the existing complete etc. as required

Providing and Fixing of 25 Ltr 2 KW sqaure shape wall mounted electric storage water heater suitable for 230 V, 50 Hz Single Phase Power Supply including connections,testing and dismantling the existing complete etc as required

Providing and fixing of 10 Watt LED mirror light with compact appearance, simple and versatile in nature, including connections, testing and dismantling the existing complete etc. as required