8536E8REPAIR TO STEEL FURNITURE FOR AFS AND AFTC UNDER GE M AF JALAHALLI BANGALORE

Amount

Repairs to Almirah Large steel with shelves (FD-67, 1031) by removing the existing unserviceable GI locks 6 levers and providing /fixing new GI locks 6 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge Make:Godrej/Novex/ Link/Priya/Sukesh.

All as per item No 1.00 but Steel Handle chromium plated 150 mm

All as per item No 1.00 but New legs made out of 1 mm thick x 18 guage MS Sheet to match with original legs.

All as per item No 1.00 but New Shelves made out of 1 mm thick MS Sheet x 18 guage.

Refixing of shelves in almirah by providing suitable clips and removing the dents and bents, welding if required in existing position.

Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends, apply putty to obtain even surfaces, painting with two coat of approved synthetic enamel paint by spraying for Almirah large Steel with Shelves, FD-67 & 1031

Repairs to Almirah Large steel 1/2Hg x 1/2 Shelf (FD-114(M), 1033, FD/E6/MAP/18) by removing existing unserviceable the GI locks 6 levers and providing and fixing new the GI locks 6 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge. Make:Godrej/Novex / Link / Priya/Sukesh.

All as per item No 8.00 but Steel Handle chromium plated 150 mm

All as per item No 8.00 butNew Shelves made out of 1 mm thick MS Sheetx18 guage.

Refixing of shelves in almirah by providing suitable clips and removing the dents and bents, welding if required in existing position.

Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends, apply putty to obtain even surfaces, painting with two coat of approved synthetic enamel paint by spraying for Almirah large Steel with Shelves, FD-67 & 1031

Repairs to Almirah Large with glass door steel with shelves (FD-104) by removing the existing unserviceable GI locks 6 levers and providing and fixing new GI locks 6 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge. Make:Godrej/Novex / Link / Priya/ Sukesh.

All as per item No 14.00 but New Steel Handle chromium plated 150 mm

All as per item No 14.00 but New Shelves made out of 1 mm thick MS Sheetx18 guage.

Refixing of shelves in almirah by providing suitable clips and removing the dents and bents, welding if required in existing position.

Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends, apply putty to obtain even surfaces, painting with two coat of approved synthetic enamel paint by spraying for Almirah large with glass doors Steel, FD-104

Repairs to Almirah medium steel with shelves (FD-243, 1032) by removing existing unserviceable GI locks 6 levers and providing and fixing new New GI locks 6 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge. Make:Godrej/Novex / Link / Priya/Sukesh.

All as per item No 20.00 but Steel Handle chromium plated 150 mm

All as per item No 20.00 but New legs made out of 1 mm thick x 18 guage MS Sheet to match with original legs.

All as per item No 20.00 but New Shelves made out of 1 mm thick MS Sheetx18 guage.

Refixing of shelves in almirah by providing suitable clips and removing the dents and bents, welding if required in existing position.

Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends, apply putty to obtain even surfaces, painting with two coat of approved synthetic enamel paint by spraying for Almirah medium Steel with Shelves, (FD-243 & 1032)

Repairs to Book Case steel (FD-90, 1028) by removing the following existing unserviceable GI locks 4 levers and providing and fixing New GI locks 4 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge. Make:Godrej/Novex / Link / Priya/Sukesh.

All as per item No 27.00 but Steel bow Handle chromium plated 100 mm with suitable screws for one shutter.

All as per item No 27.00 but Glass pane 3 mm thick float glass for shutter, Make-Modigurd/ Saint Gobin

Fixing of loose shutters in existing position duly repair/dents/bents with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends, apply putty to obtain even surfaces, painting with two coat of approved synthetic enamel paint by spraying for Book Case steel.

Repairs to Locker bed side steel (FD-1029) by removing the existing unserviceable Bow handle and providing and fixing Bow handle chromium plated 100 mm heavy duty with fixing steel screw. in replacement as per shape as existing all as specified shown on drawing and as directed by Engr-in-Charge.

All as per item No 32.00 but Steel hanging Rod 20 mm dia CP conduit pipe of thickness 1.25 mm

All as per item No 32.00 but Steel sockets 25 mm dia chromium plated welded with locker.

All as per item No 32.00 but Repair of loose doors by replacing unsv existing hinges, fittings and adjustment for smooth functioning as specified.

All as per item No 32.00 but 75mm long hasp and staple chromium plated of size 75x40x3mm fixed with revits to the shutters as specified.

All as per item No 32.00 but Steel Tower bolt 75 mm welded to the shutter as specified.

All as per item No 32.00 but Legs made out of 1 mm thick x 18 guage MS Sheet welded with locker to match with original legs.

All as per item No 32.00 but Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends, apply putty to obtain even surfaces, painting with two coat of approved synthetic enamel paint by spraying for Locker (FD-1029)

Repairs to Table Dining OR's (FD-165) by removing existing Legs made damaged/unserviceable Legs and providing and fixing Legs made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge.

All as per item No 40.00 but Long Top/Bottom stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.

All as per item No 40.00 but Short stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.

All as per item No 40.00 but New top of size 1800x600x18 mm thick made out of particle board covered on top with 22 guage aluminium sheet, and fixed to frame with 40 mm steel screw.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents /bends including any welding/repairs required and painting with synthetic enamel paint as per ground requirements and removing worn out hard rubber shoes/bushes and providing new one of Table dining OR's

Repairs to Table Office Clerk Steel (FD-84 (M), 1004) by removing existing damaged/unserviceable GI locks 4 levers and providing and fixing New GI locks 4 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge. Make : Godrej/Novex / Link / Priya/Sukesh.

All as per item No 45.00 but New Legs made out of 25mm square tube 1.6 mm wall thickness

All as per item No 45.00 but New Steel drawers made out of 18 gauge, 1mm thick MS sheet

All as per item No 45.00 but repairing of drawer by replacement of MS channel providing welding & denting.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents/bends including any welding/repairs required and painting with synthetic enamel paint as per ground requirements and removing worn out hard rubber shoes/bushes and providing new one of Table office clerk Steel.

Repairs to Table Office Officer Steel (FD-84 (M), 1003) by removing existing damaged/unserviceable GI locks 4 levers and providing and fixing New GI locks 4 levers with duplicate keys in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge. Make : Godrej/Novex / Link / Priya/Sukesh.

All as per item No 50.00 but New Legs made out of 25mm square tube 1.6 mm wall thickness

All as per item No 50.00 but New Steel drawers made out of 18 gauge, 1mm thick MS sheet

All as per item No 50.00 but repairing of drawer by replacement of MS channel providing welding & denting.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents/bends including any welding/repairs required and painting with synthetic enamel paint as per ground requirements and removing worn out hard rubber shoes/bushes and providing new one of Table office officer Steel.

Repairs to chair verandah (FD-19, 256, FD/E6/MAP/11, FD/MAP-II/15, FD/MAP-II/06) by removing existing broken/damaged/unserviceable Front leg and providing and fixing New Front leg of size 550mm long x 19mm dia x 1.6mm thick of MS Tube in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge.

All as per item No 55.00 but New Back leg of size 400mm long x 19mm dia x 1.6mm thick of MS Tube

All as per item No 55.00 but New stiffener of size 455mm long x 19mm dia x 1.6mm thick of MS Tube

All as per item No 55.00 but PVC Seat and back for Chair Verandah of size 455mm x 455mm x 4mm thick (weight not less than 1.85Kgs) Make - Harmony brand, FD/MAP-II/15, FD/MAP-II/06

Removing the existing damaged nylon newar of Chair Verandah (FD-256) and reweaving with 50mm wide nylon newar of white or light colour including any welding/repairs required and painting with synthetic enamel white paint and removing worn out hard rubber shoes/bushes and providing new one, all as specified and directed by Engr-in-charge.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents/bends including any welding/repairs required and painting to the entire frame with approved synthetic enamel paint as per ground requirement by spraying and removing worn out rubber shoes/bushes and providing new one for Chair verandah, all as specified and directed by Engr-in-charge (FD/MAP-II/15, FD/MAP-II/06, FD/E6/MAP/11).

Removing of old unserviceable plastic cane of chair verandha (FD-19), Chair tubular steel of sorts (FD-75) and recanning with approved quality of plastic 2mm/3mm/4mm including welding/repairs required and painting with approved synthetic enamel paint as per ground requirement and removing worn out rubber shoes/bushes and providing new one all as specified and directed by engineer in charge. Make of cane plastic:- Maharastra/Shah-brand

Removing the existing damaged/unserviceable lock of computer table (FD/E6/MAP/03)/(TP) of any description and providing and fixing new set of lock with duplicate keys of suitable design , all as specified and directed by Engr-in-charge.

Repairs to Table steel of sorts (FD-120, 1007, 1008. 1009) by removing existing damaged/unserviceable GI locks 4 levers and providing and fixing New GI locks 4 levers with duplicate keys for Table steel 3' x 2' with drawer, FD-1008 in replacement as per shape and size as existing all as specified shown on drawing and as directed by Engr-in-Charge Make : Godrej/Novex / Link / Priya/Sukesh.

All as per item No 63.00 but New Steel drawers made out of 18 gauge, 1mm thick MS sheet for Table steel 3' x 2' with drawer, FD-1008

All as per item No 63.00 but Legs made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.

All as per item No 63.00 but Long stiffner 3 feet length made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.

All as per item No 63.00 but Short stiffner 2 feet length made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.

M & L for repairing of drawer by replacement of MS channel providing welding & denting.

Scrapping down the existing faded off paint by any means and carrying out repairs such as removing the dents/bends/ welding including welding/repairs required and painting with synthetic enamel paint as per ground requirement and removing worn out hard rubber shoes/bushes and providing new one for Table Steel of sorts (FD-120, 1007, 1008, 1009)

Removing the old damaged plywood 12mm thick from Charpoy IP hard top (FD/MAP-II/01), and supply and fix new 12mm thick plywood BWR grade of size 1915mm x 835mm (Make : Archid/Green ply/Kitply (with QR code)) (IS-303) fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 10 Nos per charpoy) including any welding/repairs required and painting with synthetic enamel paint as per ground requirement and removing worn out hard rubber shoes/bushes and providing new one as existing all as specified shown on drawing and as directed by Engr-in-Charge

Removing the old damaged plywood 12mm thick from Bed hard (FD/E6/MAP/08(R)), and supply and fix new 12mm thick plywood BWR grade of size 1970mm x 820mm (Make : Archid/Green ply/Kitply (with QR code)) (IS-303) fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 8 Nos per Bed) including welding/repairs required and providing hard rubber bushes as existing all as specified shown on drawing and as directed by Engr-in-Charge

Removing the old damaged plywood 12mm thick from Charpoy folding IP hard top (FD-388(R)), and supply and fix new 12mm thick plywood BWR grade of size 1980mm x 900mm (in two pieces) (Make : Archid/Green ply/Kitply (with QR code)) (IS-303) fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 12 Nos per Charpoy) including welding/repairs required and painting with synthetic enamel paint as per ground requirement and removing worn out hard rubber shoes/bushes as existing all as specified shown on drawing and providing new one and as directed by Engr-in-Charge

Removing the existing faded off/damaged top of the following Table steel of sorts and supply and fix table top of 18mm thick prelaminated particle board (exterior grade) of approved quality and shade on one side and other side balancing white including french polishing/Painting to the structure of table all as specified and directed by Engr-in-Charge. Make particle board : Bhutan/ Archidply/ Novopan/ National. (a) Table steel 900x600mm with/without drawer (FD-1007 & 1008), (b) Table Steel 900x900mm (FD-1009), (c) Table office clk steel (FD-84(M)& 1004), (d) Table office offrs steel (FD-84(M) & 1003) , (e) Teapoy verandah (FD-35, 383, FD/E6/MAP/17), (f) Table dining ORs (FD-165(M)), Table writing (TP) etc.

Supply and fix 6mmx18mm teakwood beading all around the table tops including french polishing for Table steel of sorts (FD-35, 84(M), 383,1003, 1004, 1007, 1008, 1009, FD/E6/MAP/17), FD-165(M), TP

ASHA TRADING COMPANY

REENA INDUSTRIES

SUBASH FURNITURE SHOP