SPL REPAIR TO INTERNAL ROADS OF No 2 MT BN, AMC C AND C UNDER GE (EAST) LUCKNOW

Amount

M&L for repair to pot holes of any depth n.exc 1 sqm each including sweeping free from dust and mud or water scouring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2.5 cm thick) well rammed depth of potholes n exc 30 mm using paving bitumen VG-30 complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm & depth exc 50mm but n.exc 100mm deep complete all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 @ 5.00 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber and gradient complete all as directed and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic paint on road, pavement and like exc 10 cm wide in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S & F speed bumps made of heavy duty tough rubber of size 350 mm x 250 mm x 53 mm and weight 1.2 kg approx, colour black and yellow, as per manufacture instruction complete all as specified and directed Make: Dark Eye/Avery/Dennison.

Excavating in trenches not exceeding 1.5 mtr wide & not exceeding 1.5 mtr depth in soft /loose soil including forming bottom surfaces to required level or slope complete all as specified and directed.

Returning,filling in trenches excavated soil including spreading, levelling, watering and & well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 in half brick wall complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as spciified and directed.

M&L plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel and drains complete all as spciified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped end etc complete all as spciified and directed.

M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings,grouting of angle iron and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as spcefied and directed.

M/s Ram Singh Agarwal