PERIODICAL SERVICES AND OTHER MISC WORKS TO OFFRS MD ACCN OF BHAGAT ENCLAVE AT MIL STN SGNR

Amount

Demolition of RCC , chajjas, Parapet and similar items complete all as specified and directed by Engineer - in - Charge.

Dismantling of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer - in - Charge.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:4 etc. complete all as specified and directed by Engineer - in - Charge.

M&L half brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster on brick or concrete surfaces of wall/ ceiling including racking out joints, hacking for keys scrubbing down with water complete all as specified directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 10 mm thick, rendering in cement mortar CM 1:3 to work in isolated widths or in widths not forming part of general plastering such as brick/concrete faces of chajjas,facia,window jambs,sunshade and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) Applying 1.5mm thick wall care putty on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b) Applying one coat of internal wall primer by using Roller over complete all as specified (c) Applying two coats of interior Apcolite Premium Emulsion Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

M&L for prepration of New plastered External wall surface complete applying the following :- (a) Applying 1.5mm thick wall care putty on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b) Applying one coat of external wall primer by using Roller over complete all as specified (c) Applying two coat of Apex Advcanced Dust Proof Emulsion using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

M&L for applying two coats of white wash on New plastered ceiling surface complete all as specified and directed by engineer in charge.

M&L for prepration of old plastered Internal wall surface complete applying the following :- (a) Applying 1.5mm thick wall care putty on wall surfaceo nly where for filling depression of surface and nail holes to making even surface. (b) Applying 1.5mm thick one coat of Apcolite Premium interior Emulsion (incl MAP Qtrs Of Bhagat Enclave) using Roller complete all as specified and directed by engineer in charge.

M&L for applying one coat of white wash on old decorated surface of ceiling complete all as specified and directed by engineer in charge.

M&L for complete removal of existing treatment & washing the surface with pressure water on old External/internal wall surface complete all as specified and directed by engineer in charge

M&L for applying (1.5mm + 1.5mm thick = 3 mm thick) two coats of wall care putty on wall suface as per application (a) Applying one coat of wall putty on cleaned surface after that grind the surface and clean the surface with broom and prepare the surface for second coat. (b) Applying 2nd coat of putty complete all as specified and directed by engineer in charge.

M&L for applying one coat of primer on prepared surface using roller complete all as specified and directed by engineer in charge

M & L applying two coat of interior Apcolite Premium Emulsion by using Roller over primed surface complete all as specified and directed by engineer in charge

M & L for applying Two coats of 100% Premium acrylic emulsion exterior paint Apex Advcanced Dust Proof Emulsion (incl MAP Qtrs Of Bhagat Enclave) using roller surfaces complete all as specified and directed by engineer in charge.

M&L one coat of white wash on old decorated plastered or un-plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.

M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in - Charge.

M&L Complete removal and Preparation of existing surfaces and applying two coats of cement base paint over a coat of primer on old decorated plastered surface of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed by Engr-in-Charge.

S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 110mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engr-in-Charge.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing complete all as specified and directed by Engr-in-Charge.

Ditto- but refixing 20 mm bore,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting as in overflow pipe and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engr-in-Charge.

Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Ditto- but refixing 25 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 25 mm bore medium grade galvanise with all fitting as in overflow pipe and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engr-in-Charge.

Taking down and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified and directed by Engr-in-Charge.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered(white coloured) (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down of Old PVC Tank complete all as specified and directed by Engr-in-Charge. (Note : The PVC Tank shall be ISI marked and having two layers)

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where complete all as specified and directed by Engr-in-Charge.

Demolition of mud in roof, any thickness inlcuding plastering and leapint (where full thickness removed or only a part there of disposal of rubbish upto a distance n.exc 100m, where complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type C2 1:3:6 (20mm graded stone aggrigate) as in fillng and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M&L for cleaing of old Roof Wall/concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @0.40Kg/Sqm followed by APP modified three layer polymeric membrane 3mm thick, minimum wt 3.60kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm) laid as per the maufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all specified and directed by Engr-in-Charge.

Making benching/Roof Kerbing with PCC (1:2:4) type B0 using WPC as per manufacturer's insturction along side wall adjoining to roof in concave shape complete al specified and directed by Engr-in-Charge. Note : WPC shall be measured and paid separately.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 7 to 8mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1 complete all as specified and directed by Engineer-in-Charge.

M&L 40mm thick brick tiles bedded in 15mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) and pointed in cement mortar (1:1) mixed with 25% of crude oild by weight of cement complete all specified and directed by Engineer in Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

PAREEK AND COMPANY

THAKURJI ENTERPRISES

Easyways Enterprises